Tender For Supply And Installation Of High Mast Lighting At I.A. Gc Shahjahanpur.
Tender Value
63.56 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
16 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
3245
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shahjahanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Installation Of High Mast Lighting At I.A. Gc Shahjahanpur.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & fixing of 16mtr high mast shaft of approved make with rising system hot dip galvanized inside & outside dip, heavy pole sheet thickness 3mm top dia minimum 150 mm bottom dia minimum 360mm base plate thickness 32mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferntial weld with accesories for high mast such as head suitable for 6 to 12 lumaniries and its control gear boxes 1.5HP power tool 3 point suspension system with steel wire rope 6mm dia double drum winch including making suitable foundation as per manufacture drawing/ site requirement along with foundation bolts nuts washer anchor plate etc Make(Bajaj/Crompton/Phillips/Wipro) as per direction of Engineer in charge |
| 2 | Supply and fixing of factory wired integral LED Flood light lumanaries with die cast aluminium body and diffuser with driver set suitable for 200 watt confirming to IP 66 protection complete in all respects (With 5 Year Gaurantee(3+2) Three year all type (including Damage & Theft) Repair & Maintenance & With 5 Year Gaurantee).CAT AAA Make(Bajaj/Crompton/Phillips/Wipro) as per direction of Engineer in charge |
| 3 | supply & laying of 25 mm x 3mm G.I Strip from earth electrode directly in ground as required aspects |
| 4 | Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. as per UPPWD Sch no 701 |
| 5 | Supply & laying of 63mm dia (OD-63mm & ID-51mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couple etc. confirming to IS 14930 Part II complete with fitting and cutting jointing etc direct in ground ( 75 cm below ground below) including excation and refillling the trench but excluding sand cushoning and protective covering etc. complete . |
| 6 | Supply & laying 25 sq mm 3.5 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(j) & 507 (Polycab /KEI/ Havells/ Grandley/Gloster Make) |
| 7 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connected with the earth as per direction of Engineer-incharge as per UPPWD sch. no. 503 (k) 25 sq. mm 3.5 core |
| 8 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (f) 25 sq. mm |
| 9 | S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(e-ii) (25 Amp. TPN) |
| 10 | Supply & laying 50 dia GI pipe trench less through manual boggi including 90 cm deep & refilling etc Ann-2 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender