Tender For Special Repair Of Office Building Of General Manager,Industries Centre Bathinda
Tender Value
8.53 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
9 days left
EMD
17068
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Office Building Of General Manager,Industries Centre Bathinda
BOQ
| Sl. No. | Item Description |
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: EXECUTIVE ENGINEER PROVINCIAL DIVISION, BATHINDA NAME OF WORK:- Special Repair Of Office Building of General Manager,Industries Centre Bathinda Contract No: Civil Works Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Work Name Item Code / Make Quantity Unit RateRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | CIVIL WORK |
| 3 | Scrapping white wash and colour wash CSR No. 8.31 (a) |
| 4 | Scrapping Cement plaster CSR No. 8.31 (c ) |
| 5 | 12.5 mm thick cement plaster 1:4 CSR No. 15.9 |
| 6 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish CSR No. 16.65 |
| 7 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) CSR No. 16.63 |
| 8 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. CSR No. 16.18 |
| 9 | Renewing glass panes with putty and nails wherever necessary :--Glass panes weighing 10.75 Kg/sqm CSR No. 31.5 (b) |
| 10 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35 mm thick CSR No. 17.27 a (iv) |
| 11 | Providing & Fixing decorative high pressure laminated sheet 1mm (1 Star) thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. CSR No. 17.9 |
| 12 | Providing and fixing wall panelling CSR No. 17.47 |
| 13 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm CSR No. 17.23 (ii) |
| 14 | Supplying and fixing of Japani sheet frames (Chowkat)consistingof18gauge(1.25mm) thicksteel sheet of the specified section (standard designlatest), includingironlugs(holdfasts) ironhinges conforming to PWD specifications including bolts for fixing steps, lock notchprovision for receiving tower boltsand finished, fixed in position including the cost of cementconcrete1:3:6for fillingintheframeandcement concrete 1:2:4 for lugs complete to thesatisfaction of Engineer-in-charge. Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter CSR No. 18.51 c |
| 15 | Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. (a) panelled, glazed or glazed and panelled. (ii)35 mm thick CSR No. 17.10 xvii |
| 16 | Wire gauge Hollock wood door shutter without springs housed in chowkhat A 35 mm thick CSR No. 17.11 ii |
| 17 | Wrought iron & Mild steel ladders, framed grills,gratings etc. with ends of bars riveted or moldedforged framed window guards, barred iron doorsstair case iron railing etc. including cost of boltsand nuts, screws, welding rod complete fixing inposition CSR No. 18.4 |
| 18 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (B)Glazing area above 0.09 sqm (IV)8.0mm thick Plate glass(weight not less than 20 kg/ sqm) CSR No. 17.26 |
| 19 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (c) I.S.I Designation No. III (size of door 851mm to 1000mm) CSR No. 17.43 c |
| 20 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300mm x 16mm CSR No. 17.49 A |
| 21 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm CSR No. 17.23 (ii) |
| 22 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consistingofwhite lead, linseedoil,Varnish, andChalkMitti includingfinishingthesurface to required finish complete. CSR No. 16.15 |
| 23 | Applying pink primer or aluminum priming coat on woodwork including preparation of surface knotting and stopping etc. CSR No. 16.16 |
| 24 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. CSR No. 16.2 |
| 25 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. CSR No. 16.17 |
| 26 | Regrading terracing of mud plaster coveredwithtilesorbricks incement by dismantlingtilesorbricks, removingmud plaster, preparing the surface of mud plaster to proper, slope, relayingmud plasterGobri leapingand tilesor bricks grouted incementmortar 1:3 (1cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material tothedumpinggroundwithin50 m lead (Thecost of newtilesor bricks excluded). CSR No. 31.11 |
| 27 | Floatingcoatof1:5mmthickneatcement laidin one operation to the topping CSR No. 14.4 |
| 28 | Providingand fixingbright finishedbrassdoor latch with necessary screws etc. complete : 250x16x5 mm CSR No. 17.22 iii |
| 29 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. CSR No. 30.95 |
| 30 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)Size 600x600 mm CSR No. 14.115 a |
| 31 | Grouting the joints of flooring tiles having joints of3 mm width, using 2mm to 3 mm gap usingspacers and later this gap to be filled withcement based grout ) with Cement base groutand matching pigments etc., complete, includingfilling / grouting and finishingcomplete as perdirection of Engineer-in-charge. CSR No. 14.118 a Total in Figures 853407.0 853407.0 INR Eight Lakh Fifty Three Thousand Four Hundred & Seven Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender