Tender For special Repair To Bldg No T-17 At Bmh Line Nagarjuna Complex Of Aoc Centre Under Ge (South) Secunderabad
Tender Value
47.95 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
20 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-17 At Bmh Line Nagarjuna Complex Of Aoc Centre Under Ge (South) Secunderabad
BOQ
| Sl. No. | Item Description |
| 1 | Dismanting asbests cement ( corrugated, semi-currugated etc.) sheets in roof covering complete all as specified and directed. |
| 2 | S & F prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F pre painted gal valume aluminium zinc coating GI based plain steel sheeting 0.5mm thick of any colour haing tensile strenghth of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling framed wooden purlin/Rafter work of any description sectional area n exc 40 Sqcm not other wise provided for, complete all as specified and directed. |
| 5 | S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A.complete all as specified and directed. |
| 6 | M & L for providing cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed. |
| 7 | M&L for preparation of old steel surface of any description over 10 cm width or girth and applyingone coat of synthetic enamel paint. complete all as specified and directed. |
| 8 | M&L Preparatioin of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat primer. complete all as specified and directed. |
| 9 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed. |
| 10 | M & L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built cement mortar 1:6 complete all as specified and directed. |
| 11 | Taking down plastering on brick walls etc including racking out joints, hacking for key, scrabing down with water etc complete all as specified and directed. |
| 12 | M & L for 15 mm thick (inner 10mm layer 1:6 and outer 5mm layer 1:4) rendering in Cement Mortar on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement and using water proofing compound for outer 5mm layer complete all as specified and directed incl scaffolding if necessary and including Taking down plastering on brick walls etc including racking out joints, hacking for key, scrabing down with water etc. complete all as specified and directed. |
| 13 | M & L for 15 mm thick rendering in Cement Mortar 1:6 on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and directed. |
| 14 | M&L for two coat of exterior emultion weather proof paint over a coat of primer and exterior putty on new surfaces of wall including preperation complete all as specified and directed. Make :APEX ULTIMA of Asian Paint or equavalent Note : APEX ULTIMA paint will be done by Roller only |
| 15 | M&L for two coat of OBD over a coat of primer and putty including preparation of new plastered surfaces of walls complete all as specified and directed. |
| 16 | M&L for Complete removal of existing treatment on walls and applying two coat of oil bound distemper over a coat of primer and putty complete all as specified and directed. |
| 17 | M & L for complete removal of existing treatment, preparation of surfaces and applying two coats of exterior emultion weather proof paint over a coat of primer and external putty complete all as specified and as directed.Make :APEX ULTIMA of Asian Paint or equavalent Note : APEX ULTIMA paint will be done by Roller only, after complete removal of old loose flakes |
| 18 | Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets. Complete all as specified and as directed. |
| 19 | M&L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605mm with aluminium main tee, cross tee size 25x25x1.6 mm and aluminium wall angle size 25x25x1.8 mm fixed to wall hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire 4mm thick with locking clip complete all as specified and directed. |
| 20 | M&L for Providing and fixing Non asbestos designer E-Board 4mm thick in ceiling fixed to snap grid as per manufacturers instructions complete all as sepcified and directed |
| 21 | Taking down chowkat with frame (without taking off shutter from the frame) n exc 1.50 Sqm each complete all as specified and directed. |
| 22 | Taking down chowkat with frame (without taking off shutter from the frame) exc 1.50 Sqm each complete all as specified and directed. |
| 23 | M & L for 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 24 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 25 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 26 | S&F pressed steel door frame 125x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates comlete as specified and directed (pcc filling of holloow section measured and paid seprately). complete all as specified and directed. |
| 27 | S & F pressed steel frames for doors size 105x60 with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 28 | Cutting holes in brickwall builtin cement mortar depth of embedded portion of holdfast exc halfbrick but not exc one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. |
| 29 | S & F 40 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on one side and one face is covered with deco rative face veneer with lipping/frame to match complete all as specified and directed. |
| 30 | S & F 35mm thick 2nd class hard wood glazed skeleton door shutters open rebated and prepared to receive glass, gauze, etc (without sah bars) and divided into square with plain, rounded, chamfered, mitred complete all as specified & directed. |
| 31 | S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and avg width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed. |
| 32 | M&L for 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination &other side balancing white lamination, fixed with screws to timber frame work complete all as specified & directed. |
| 33 | M& L plain filletes square, reactangular in section sawn secured with nails or brads with 2nd class hardwood having sectional area n exc 3.0 sq cm complete all as specified and as directed |
| 34 | S & F Continuous (piano) hinges of width of flap 30mm, mild steel, bright finish or electrogalvanised complete all as specified and as directed |
| 35 | S&F of Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed 100mm type C-21 complete all as specified and directed. |
| 36 | S&F of aluminium anodised barrel tower bolts of extruded section and fixed 150mm complete all as specified and directed. |
| 37 | S & F Aluminium handle 150mm fabricated type complete all as specified and directed. |
| 38 | S & F Aluminium anodised barrel tower bolts 200mm of extrded section complete all as specified & directed. |
| 39 | S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 40 | S&F ordinary rat tail rod pattern springs including roller and roller plate complete 200 mm long helical door springs including roller plate complete all as specified & directed. |
| 41 | S& F for 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and directed. |
| 42 | S&F powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, sliding windows, ventilators with one or more rebates including jointing cleats for fixing etc. including making good distrubed portion of wall complete all as specified and directed. |
| 43 | S & F 5.5mm th sheet glass ordinary quality and fixed with oil putty in square exc 0.5 sqm in each pane complete all as specified & directed. |
| 44 | M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber/aluminium frame work including lapping / beading complete all as specified & directed. |
| 45 | S&F for 18 mm thick , prelaminated medium density fibre (MDF) , interior grade, prelaminated one side with decorative choice lamination and other side balancing white with lamination fixed with screw to timber/ steel frame work as in CB shutter, shelves etc with PVC liping on all exposed edges on same texture and shade. Stainless steel cleat of suitable size will be use to fix the shelves of CB and cabinets. complete all as specified and directed. |
| 46 | S & F Auto closing hinges 35mm of 0 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete fixed in position complete all as specified and directed. |
| 47 | S & F D-type cabinet handles premium quality, 100 mm long extruded brass handles complete fixed in position complete all as specified and directed. |
| 48 | S & F in reairs of Stainless steel 304 grade wire Basket of pull out type like lain/cup & saucer/bottle/multi purpose/2-3 shelf baskets etc for kitchens of required size complete fixed in position complete all as specified and directed. Make : Elnora/Godrej/Evershine as approved |
| 49 | S&F for ball bearing runners 400mm to 600mm Telescopic full extention load capcity 45 to 50 kgs complete all as specified and directed. Make: Hettich/Harrison/Dorsel as approved |
| 50 | S & F Windows/Ventilators fabricated from roll framed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm. incl existing wooden/steel window/ventilators to be removedPaint Specifications:Coated sections should be with Primer coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick or Powder Coated with pure Polyester up to 50-60 microns thick.Dimensions of Sections:Sections for Frame should be of 72mm x 55mm, Section for Mullion should be of 72mm x 50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12mm x 12mm, and Section for Fly Mesh should be of 40mm x 20mm.Fixing Details: Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter.Accessories:Each Glazed Shutter and Mesh shutter should be provided with SS Pivot Hinges – 1 set, Seccolor Handle & Seccolor Stay.Window Frame should be fixed to brick/ concrete masonry by using Nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frameGlass: Glass shutter & Fixed Glass portions should be provided with a glass of 4MM Plain Float /Pinhead Glass as site required.Mesh: Mesh Shutter should be provided with a Stainless Steel Fly mesh of 304 grades. Grill:Windows should be provided with Grill made of 10mm sq. MS Bars welded to at 150mm center-to-center, 5mm x 10mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. |
| 51 | Demolition of cement concrete(unreinforced) in ground floors and paving nexc 15 cm thickness (below and above ground level) complete all as specified & directed. |
| 52 | M & L 75 mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in plinth protection finished even and smooth without using extra cement. complete all as specified and directed. |
| 53 | S&F 25mm Stainless steel curtain rods incl required nos of brackets complete all as sepcified and directed |
| 54 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed. |
| 55 | Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed. |
| 56 | M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) finished fair and even as in sub base flooring complete all as specifiead and as directed. |
| 57 | M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified & directed. |
| 58 | M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting/dado surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed. |
| 59 | M & L Non skid ceramic tiles 7 to 8mm thick (square/rectangluar) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6. complete all as specified and directed. |
| 60 | M&L for glazed ceramic coloured tiles of size 300x450x7mm thick in vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:6 complete all as specified and directed. |
| 61 | M&L Granite(of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platorms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite and rounding of edges including 15mm thick screed bed and incl its dismantling complete all as specified and as directed. |
| 62 | S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete to walls and ceiling or laid in floors including tacking down of existing any pipe complete all as specified & directed |
| 63 | S&F 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete to walls and ceiling or laid in floors including tacking down of existing any pipe complete all as specified & directed |
| 64 | M & L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet in 75mm. complete all as specified and directed. |
| 65 | S&F for 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 66 | S&F for Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 67 | S & F PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe. complete all as specified and directed. |
| 68 | S & F PVC connection 15mm size with PTMT nuts of length 450mm. complete all as specified and directed. |
| 69 | S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and directed. |
| 70 | S&F in repairs 15mm bore wall Mixer Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed ll complete all as specified and directed. |
| 71 | Supplying and Fixing in repair 2 Way Bib Tap with Wall Flange complete complete with and including all fixing accessories all as specified and as directed |
| 72 | S & F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 73 | S & F corner shelf of dimension 22cm x 22cmx 7cm conical shape made of toughned glass, colour: Glossy, wall mounted (Make Highlife, SNC or equilant) complete all as specified and directed. |
| 74 | S&F in repairs PVC cabinet with door fitted with looking mirror size 422mm x 622mm complete all as specified and directed. |
| 75 | Supply & fixing in repair vitreous china wash basin with padestal , white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand including CP Pillar tap, PVC connection pipe 15 mm bore 450 mm long , waste coupling, PVC waste pipe complete all as specified and directed. |
| 76 | S&F in repairs Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed. |
| 77 | S&F in repairs Tubular Towel ring 20mm dia, Ring type, 20cm of dia with flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed. |
| 78 | S&F 15mm bore stop valve, concealed type chromium plated, castcopper alloy withcrutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified & directed |
| 79 | S & F in repairs chromium plated 125mm shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed. |
| 80 | Taking down AC/PVC pipes of any description any pattern incl all fittings heads, shoes bends etc complete all as specified and directed. |
| 81 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/wall or in floors 110mm bore complete all as specified and directed. |
| 82 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore |
| 83 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 84 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 85 | S&F PVC (SWR) bends any radius 75mm bore with access doors complete all as specified and directed. |
| 86 | S&F in repairs vitreous china wash down water closet (pedestal pattern) any colour with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity,flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm and Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including complete all as specified and directed. |
| 87 | S&F in repair rotational moulded polyethylene double layer water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks complete all as specified & directed. |
| 88 | S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified & directed. |
| 89 | S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore complete all as specified and directed. |
| 90 | Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar and incl removing of debris complete all as specified and directed. |
| 91 | M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in 75mm thick as in sub base complete all as specified & directed |
| 92 | S&F for chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigment set jointed and pointed in neat cement slurry laid over and including 20 mm thick screed bed of cement mortor (1:6) in floors. complete all as specified and directed. |
| 93 | M & L for taking down copper/aluminium point wiring (light, fan, socket, power, security lights or bulkhead) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 94 | M & L for point wiring concealed type complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceiling including continous earth wire 1.5 Sqmm PVC insulated FR-LS unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting of modular switches/sockets etc complete including making good of disturbed surfaces of wall / ceiling / floor all complete as specified and directed (a) onelight point/ ceiling /exhaust fan point |
| 95 | (b) One three pin switch socket 6 Amps outlet on independent board.complete all as specified and directed. |
| 96 | (c) One three pin switch socket 6 Amps outlet on same board complete all as specified and directed. |
| 97 | All as per item No 2 here in before but with cable 2.5 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 2.5 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and directed |
| 98 | All as per item No 2 here in before but with cable 4 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 4 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and directed. |
| 99 | S & F in repair Modular switch 1 way 6A , 1-module complete all as specified and directed |
| 100 | S & F in repair Modular switch 1 way 16A with indicator, 1-module complete all as specified and directed |
| 101 | S & F in repair Modular socket, shuttered type, 6A - 3 pin 2 -module complete all as specified and directed |
| 102 | S & F in repair Modular socket, shuttered type, 6/16A - combined 2-module complete all as specified and directed |
| 103 | S & F 3 pin, 6 A, 250 V ceiling rose having terminal capacity 3 X 1.5 mm² IP 20 protection complete all as specified and directed |
| 104 | S & F Electronic fan regulator Modular type suitable for BLDC fans stepped socket type, suitable to work on 230 volts complete all as specified and directed. |
| 105 | S & F ceiling fans complete with blades,copper winding, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery not less than 210 CFM with service value more than equal to (≥) 6.00, BEE Five star rated with brushless direct current motor (BLDC) white colour with suitable fixing arrangments incl taking down old fan and deposited to EM store complete all as specified and directed |
| 106 | S & F recess mounting LED light fitting 2' x 2' of capacity 36 Watts powder coated white CRCA full glow,efficacy 120 lumen/watts rated life 50000 burning hours suitable for false ceiling pop/grid ceiling including making electrical connection from ceiling rose to light fitting incl taking down old one complete all as specified and as directed . |
| 107 | S & F 20 W surface / wall mounted LED batten light fitting aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated llife 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture incl taking down old one complete all as specified and directed |
| 108 | S & F 10 W surface / wall mounted 2 feet LED batten light fitting input voltage range 250 V, input frequency 50Hz, efficacy not less than 100 Lumen/Watt rated life 25000 burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture incl taking down old one complete all as specified and directed |
| 109 | S & F LED security light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant,efficacy not less than 120 lm/Watts,rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer incl taking down old one complete in all respect as specified and directed |
| 110 | S & F exhaust fan, metal body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete including making suitable size hole in wall for fixing of fan incl taking down old fan and deposited to EM store complete all as specified and directed |
| 111 | S & F exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep incl taking down old fan and deposited to EM store complete all as specified and directed |
| 112 | S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) incl taking down existing unserviceable Distribution boards with MCB's complete all as specified and as directed. |
| 113 | S & F Vertical loadline type TPN DB 4 way double door with prov of MCCB as incoming 4P, made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar rating not less than 200 A incl concealed in wall/surface complete all as specified & directed Note :- MCCB shall be measured and paid separatly. |
| 114 | S&F in replacement MCCBs 415V, 16KA, 125 amps 4 Pole suitable for DB complete all as specified & directed |
| 115 | S & F single pole & neutral, double door, metallic distribution board 8 ways conforming to IEC 61439-3, suitable for flush / surface mounting with provision for DP MCB as incomer and SP MCBs as outgoing, incl taking down existing unserviceable Distribution boards with MCB's complete all as specified and directed |
| 116 | S&F of MCB single phase and neutral (SPN), 40 Amps, 230 Volts, connecting with lugs, complete all as specified and directed |
| 117 | S&F of MCB SP 6 to 32 Amps 'C' series complete all specified and directed |
| 118 | S&F of MCB, single pole, 40 Amps, 240 Volts, connecting with copper lugs complete all as specified and directed |
| 119 | S&F of MCB three phase and neutral (TPN), 100 Amps, 415 Volts, connecting with lugs, complete all as specified and directed |
| 120 | S&F GI tubing 50mm dia \\"light grade\\" with all fittings, laid in trenches, fixed on pole/under road crossing or passing through gutters etc, complete all as specified and directed. |
| 121 | S&F in replacement of ceiling fan downrod of dia 15 mm required height including drilling of holes and threads and suitable locking arrengment to fix the rod and fan complete as per the site requirement as directed at site complete all as specified and directed. |
| 122 | M & L for submain wiring using 3 runs of 6 Sq mm 1100 V grade single core FR-LSH flexible cable conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade PVC recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 25 mm NB, including taking down old submain wire and making good of disturbed surfaces of wall / ceiling / floor all complete as specified and directed |
| 123 | Material and Labour for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less' than 1.5meters below normal ground level, earth plate connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR-2009 (part I Specifications) connected to earth test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil and adequate quantity of common salt & charcoal for alternate layer around the earth plate, including PCC (1:2:4) pit and 10mm thick C.I. cover with arrangement of hinge to 40x40x6mm C.I. angle iron frame, including 20mm dia G.I. pipe for watering purpose with the arrangement of funel and wire mess, including GI pipe of 15 dia for earth lead protection complete incl taking down old one complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender