Tender For Provision Of Fencing, Interlocking And Connected Items For Transformers And Rmus And Provn Of Garden Lights In Offrs Mess Bde Under Ge E/M Lucknow
Tender Value
40.55 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
21 days left
EMD
81100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Fencing, Interlocking And Connected Items For Transformers And Rmus And Provn Of Garden Lights In Offrs Mess Bde Under Ge E/M Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | S&F Mild steel work of angle iron or flat iron etc for railings, balusters, nosing to steps including embeding in concrete and screwing etc, flat iron for posts, & struts in fencing etc including cutting tops to shape as directed, drilling holes , notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc & similar work conforming to Fe 290 gde E-165 complete all as specified and directed. |
| 2 | S&F MS framed work as in doors or gates of angle or other section etc to be prepared for hanging and including either hooks and hinges etc with end of bars shouldered and /or reiveted and welded complete all as specified and directed. |
| 3 | S&F Mild steel screw bolts (Machine made), 11 to 15 mm neck dia with hexagonal or square heads at one end and screwed the other , or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 10 cm long complete all as specified and directed. |
| 4 | Supply only chain link fencing of galvanized steel wire of any dia / aparture, made up into mattresses or cages lapped wired conforming to IS 2721 all as specified & directed.Note:-(i) Fixing only fencing will be measured and paid separately.(ii) Weight of chain link fencing shall be as certain through board of officers. |
| 5 | Fixing only chain link fencing of description fixed to steel post with mild steel flat & nut bolt etc complete all as specified and directed.Note: (i) Supply and fix mild steel nut bolt, line wire and flat will be measured and paid separately. |
| 6 | M&L for preparation of new or previous untreated steel and iron surfaces of any description over 10 cm width or girth , not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 7 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, / laying of pipe / cable etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 8 | Returning, filling in including spreading levelling watering and well ramming in layer n.exc 25 cm thick using excavated soil complete all as specified and directed. |
| 9 | Removing excavated soil to a distance not exc 50 m and depositing where directed at level n exc 1.5 m above the starting point complete all as specified and directed. |
| 10 | M&L for plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregate in foundation, filling and mass concrete complete all as specified and directed. |
| 11 | M&L for Brick work with fly ash old size, straight or curved on plan exc 6 m mean radious built in cement mortar (1:4) for transformer foundation, dwarf wall for fencing etc complete all as specified and directed. |
| 12 | M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surface finished fair and even complete for transformer foundation , dwarf wall of fencing etc complete all as specified and directed. |
| 13 | M&L for two coats of cement base paint over a coat of cement base primer including preparation of newly plastered surfaces etc complete all as specified and directed. |
| 14 | M&L for 75 mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as the sub base of floors complete all as specified and directed. |
| 15 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thick, M-35 Grade set and jointed with neat grey cement and pigment including 40mm thick sand cushion etc complete all as specified and directed. |
| 16 | M&L for Danger notice plate made of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters , figures and conventional skull and bones in signal red colour and fixed with M.S clamps , bolts and nuts of approved size, for HT, 25mmX20mmX 1.6mm size complete all as specified and directed. |
| 17 | M&L for fabricating, supplying and installing Retro Reflective sign board, consisting of 3 feet x 2 feet frame for writing made of 25mmx25mm medium grade SS 304 with 3 mm ACP cladding both sides (i.e. 3mm ACP + 3mm ACP) glued together for writing on one sides. Writing shall be of Retro reflecting over same sheeting of letter sizes not less than 50mm and to be adjusted all as per site requirement and direction of Engr-in-Charge. ACP cladding shall be fixed with frame with riveting or clamping to hold with frame and board shall be fitted on main gate fencing complete all as specified and directed. |
| 18 | Supplying and laying or fixing HDPE double wall corrugated pipe 50mm outer dia & 38 mm inner dia alongwith all accessories like socket, bend, couplers etc ISI marked as per IS-16205 (Part-24) including cutting/jointing laid in trenches, wall, floor etc. as required (for cable protection) complete all as specified and directed.Note :- Excavation, earth work, removal shall be measured and paid separately under appropriate items. |
| 19 | Boring of hole under road/pavement/hard standing or any other situation by manual means and suitable for passing of GI pipe 40 to 100 mm bore or DWC HDPE pipe and making good both ends complete all as specified and directed. |
| 20 | S&F 40 mm bore GI Pipe (light grade) with necessary accessories/ fittings for cable protections/pole for crossing of culverts/nallah of complete all as specified and directed. |
| 21 | Material & Laying, jointing and testing of LT under ground electric power cable crossed linked polyethylene (XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded, heavy duty 1100 Volts grade of size 10 sqmm cross sectional area, 2 core laid in HDPE DWC Pipe/trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts , bolts, washers complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection bricks and pipe shall be measured and paid separately under appropriate items. |
| 22 | Supply drawing, connecting and testing 3 core, 1.5 Sqmm PVC insulated and PVC round sheathed` copper conductor (flexible ) industurial cable, 1100 Volts conforming to IS 694 including providing suitable copper lugs complete all as specified and directed. |
| 23 | S&F 25 Watt LED Post Top lanterns housing made of Die-cast aluminum spigot for mounting LED driver and spun aluminum canopy , epoxy powder coated matt black finish after phosphochromate treatment , high quality polycarbonate cover is used over LED moudule to enhance the lumen output & clear acrylic diffuser is used to provide overall glare free light , Powered by electronic integral , isolated poted electronic LED driver in ABS housing with APFC (SMPS based constanct current supply) with lower THD , output short/open circuit protection , Surge Voltage protection & other safety test as per IS 15885 Part-2/Sec-13 , IP 65 , Lumen efficiency not less than 98 lumen per watt system efficency ,power factor >0.95, THD<10% at Full load CRI> 70% complete all as specified and directed. Please Enable Macros to View BoQ information |
| 24 | S&F 25 Watt LED Post Top lanterns housing made of Die-cast aluminum spigot for mounting LED driver and spun aluminum canopy , epoxy powder coated matt black finish after phosphochromate treatment , high quality polycarbonate cover is used over LED moudule to enhance the lumen output & clear acrylic diffuser is used to provide overall glare free light , Powered by electronic integral , isolated poted electronic LED driver in ABS housing with APFC (SMPS based constanct current supply) with lower THD , output short/open circuit protection , Surge Voltage protection & other safety test as per IS 15885 Part-2/Sec-13 , IP 65 , Lumen efficiency not less than 98 lumen per watt system efficency ,power factor >0.95, THD<10% at Full load CRI> 70% complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender