Tender For Providing & Fixing Of New Security Cabin And Installation Of Stainless Steel Gate At Nalanda Hostel, Iit Delhi. Sub-Head:- Civil Works.
Tender Value
22.16 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
8 days left
EMD
44322
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing & Fixing Of New Security Cabin And Installation Of Stainless Steel Gate At Nalanda Hostel, Iit Delhi. Sub-Head:- Civil Works.
BOQ
| Sl. No. | Item Description |
| 1 | 1) EARTH WORK |
| 2 | 1.1) Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: |
| 3 | 1.1.1) All kinds of soil |
| 4 | 2) CEMENT CONCRETE |
| 5 | 2.1) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 6 | 2.1.1) 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | 3) MASONRY WORK |
| 8 | 3.1) Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: |
| 9 | 3.1.1) Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 10 | 4) WOOD AND P.V.C. WORK |
| 11 | 4.1) Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 12 | 4.1.1) 200x10 mm |
| 13 | 4.2) Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. |
| 14 | 4.2.1) 100mm |
| 15 | 4.3) Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378) |
| 16 | 4.3.1) 250x16 mm |
| 17 | 5) STEEL WORK |
| 18 | 5.1) Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 19 | 5.1.1) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 20 | 5.2) Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 21 | 5.2.1) Hot finished welded type tubes |
| 22 | 5.3) Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 23 | 6) DEMOLISHING /DISMANTLING WORK |
| 24 | 6.1) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 25 | 6.1.1) Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 26 | 6.2) Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 27 | 7) Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 28 | 7.1) For fixed portion |
| 29 | 7.1.1) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 30 | 7.2) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 31 | 7.2.1) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 32 | 7.3) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 33 | 7.3.1) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 34 | 8) 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 35 | 8.1) 1:4 (1 cement: 4 fine sand) |
| 36 | 8.2) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 37 | 8.3) Distempering with 1st quality acrylic distemper (ready mixed ) having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 38 | 8.3.1) Old work (one or more coats) |
| 39 | 8.4) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 40 | 8.4.1) Two or more coats on new work |
| 41 | 9) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 42 | 9.1) With cement mortar 1:4 (1cement: 4 coarse sand) |
| 43 | 10) Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge |
| 44 | 11) Providing and fixing of customized 50mm thick PPGI Puff panel for wall (Sandwiched with high density polyuretharene foam in berween two pre painted galvanised iron sheet panel made of 0.50mm thick JSW sheet 40+/- 2kg/cubic meter density as per Manufacturer specifications) and fixing door of size 0.9x2.10 mtr with the same material as of wall including all fittings & fixtures for locking arrangement and including making provision for opening for doors, windows, ventilators, electrical conduits, switch boards etc and cutting to size and shape wherever required complete in all respect at all level including loading unloading and cost of frame structure support of wall etc. as per direction of Engineer- In- Charge. (Note: Rates are inclusive of GST. all taxes & cartage etc. and the payment shall be made based on the actual exposed finish area (one side only) of the panel with reduction of opening of door/window/ventilator) |
| 45 | 11.1) 50mm thick PPGI Puff panel for wall |
| 46 | 11.2) Providing and fixing customized 40/63mm thick corrugated PPGI Puff panel for roof (Sandwiched with high density polyuretharene foam in between two pre painted galvanised iron sheet panel made of 0.50mm thick JSW sheet 40+/- 2kg/cubic meter density as per Manufacturer specifications) with proper roof slope including necessary fittings & fixtures and cutting to size and shape wherever required complete in all respect at all level including loading unloading and cost of frame structue support of roof purlins, rafters and trusses etc. as per direction of Engineer-In-Charge. ( Note: Rates are inclusive of GST. all taxes & cartage etc and the payment shall be made based on the actual exposed finish area (one side only) of the panel.) |
| 47 | 11.2.1) 40/63mm thick corrugated PPGI Puff panel for roof |
| 48 | 11.3) Providing and fixing 18mm thick commercial ply wood sheet (ISI marked) Over frame work of cabin floor and platform including necessary glue and nails etc. complete as per directions of Engineer-in-charge. |
| 49 | 11.4) Providing and fixing homogeneous polyvinile chloride sheet/tile of approved colour and shade, in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer like fevicol SR 998 or equivalent including rolling with light wooden roller weighing about 5 kg. all complete as directed by Engineer-in-charge. |
| 50 | 11.4.1) 2mm thick Sheet |
| 51 | 11.5) Providing & fixing sliding wheel roller set of approved make or equivalent in aluminium sliding window shutters for opening and closing as per direction of Engineer-in-charge. |
| 52 | 11.6) Providing & fixing crescent lock of approved make or equivalent in aluminium sliding window shutters for opening and closing as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender