Tender For Repairs To Flooring, Toilets, Sunken, Joineries, Cupboards And Misc Items At Jco/Or Qtrs Phase-I Area (Rupa, Gachham, C Top, Dp, Dahung) With Allied E/M Works Of Age B/R Under Ge Tenga
Tender Value
39.90 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
21 days left
EMD
79800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kameng → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Flooring, Toilets, Sunken, Joineries, Cupboards And Misc Items At Jco/Or Qtrs Phase-I Area (Rupa, Gachham, C Top, Dp, Dahung) With Allied E/M Works Of Age B/R Under Ge Tenga
BOQ
| Sl. No. | Item Description |
| 1 | M&L sunken treatment of Toilet/Bathroom( Including Demolition) as in following steps: i) Top of RCC slab in sunken portion including peripheral beams shall be plastered with 15mm thick in cement mortar 1 : 3 using approved water proofing compound @ 3% by weight of cement finished even and smooth using extra cement, curved at the junctions. ii) Apply two coats of epoxy resin/polymer modified cementations coating like brush bond of FOSROK/SIKA/Pedilite or equivalent, both on floor & beams. iii) Sunken slabs to be given 1:20 slope outward 25mm GI pipe spout with 300 mm projection beyond outer surface of wall shall be provided. iv) Water tightness of sunken portion to be tested by ponding with water for 72 hours. In case of even a slight mark of seepage, the portion to be treated and ponding shall be carried out again to confirm the water tightness of sunken slab. v) The sunken portion will be filled with lean concrete 1:4:8 type D2 using brick aggregates to required depth. Note : No cutting in roof slab/beam shall be allowed for passing of CI pipes & fittings.The stage of water proofing to sunken slab shall be passed by Eng-in-charge/GE. |
| 2 | Demolition of cement concrete in floors n.exc 15 cm thick in ground floor (below or above ground level) and in any position all as specified and directed by Engr-in-charge. |
| 3 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggragate as in subbase 40 mm thick complete all specified and directed by engr in charge. |
| 4 | M&L for Vitrified Ceramic tiles light shade 08-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed of CM 1:4 complete all as specified and directed |
| 5 | M&L for Vitrified Ceramic tiles light shade 08-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering with CM 1:6 on fair faces of brick work or concrete surfaces as in skirting all as specified and directed by Engr-in-charge. |
| 6 | M&L for Non - skid white Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed of CM 1:4 complete all as specified and directed |
| 7 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed of CM 1:4 complete all as specified and directed |
| 8 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering with CM 1:6 on fair faces of brick work or concrete surfaces as in skirting all as specified and directed by Engr-in-charge. |
| 9 | Material and labour for 350x 250x7mm or 450x350x7mm thick glazed ceramic coloured tiles set and jointed in neat cement slurry and pointed in coloured cement over 10mm thick rendering with CM 1:6 on fair faces of brick work or concrete surfaces as in dado of bathroom, toilet and kitchen all as specified and directed by Engr-in-charge. |
| 10 | Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concreteor brick surrounds, glazed with putty or fixed with beads all as specified and directed. |
| 11 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed. |
| 12 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane all as specified and directed. |
| 13 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares exc 0.50 Sqm in each pane all as specified and directed. |
| 14 | S&F 3mm thick figured glass, pin head glazing with oil putty in squares n exc 0.50 Sqm in each pane all as specified and directed.. |
| 15 | Taking down cement plaster on brick, concrete block wall or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed. |
| 16 | M & L for 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement all as specified and directed. |
| 17 | M & L for 15 mm thick plaster in cement mortar 1:4 on brick or concrete surfaces finished even & smooth without using extra cement all as specified and directed. |
| 18 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified and directed. |
| 19 | Material and labour Preparing newly plastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of primer all as specified and directed. |
| 20 | M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 21 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm. |
| 22 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm all as specified and directed. |
| 23 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each all as specified and directed. |
| 24 | Taking down Shutters of any description n exc 1 sq. m each all as specified and directed. |
| 25 | S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 26 | S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame tp match all as specified and directed by Engr-in-charge. |
| 27 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc , size of members of shutters as specified in SSR Part I , Section 8, clause 8.24 (a) , supplied and fitted to chowkhats all as specified and directed. |
| 28 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 29 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 30 | S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0 plain, let in fixed independently in wooden frames , or T section support for shelves all as specified and directed. |
| 31 | S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed all as specified and directed by Engr-in-charge. |
| 32 | S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed all as specified and directed by Engr-in-charge. |
| 33 | S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed all as specified and directed by Engr-in-charge. |
| 34 | S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed all as specified and directed by Engr-in-charge. |
| 35 | S & F 150mm size extruded aluminium alloy handles, fabricated type anodised all as specified and directed by Engr-in-charge. |
| 36 | S & F 100mm size extruded aluminium alloy handles, fabricated type anodised all as specified and directed by Engr-in-charge. |
| 37 | S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed all as specified and directed by Engr-in-charge. |
| 38 | S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece all as specified and directed by Engr-in-charge. |
| 39 | S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified and directed by Engr-in-charge. |
| 40 | S&F PVC coated 25mm dia mild steel chromium plated curtain rod of medium weight and including fixing brackets, finals and decorative end supports etc complete all as specified and directed by Engr-in-charge. |
| 41 | S& F Door closer aluminium (Die cast) body hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed all as specified and directed by Engr-in-charge. |
| 42 | S& F 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-charge. |
| 43 | S & F Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,Mortice night latch, glazing clips, rubber neoprene packing handles 2 nos in each door, hinges, Floor spring, door stopper anodised aluminium snap beading screws etc with coplete all as specified and directed by Engr-in-charge. |
| 44 | S&F for Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-charge. |
| 45 | S & F Anodised aluminium window and ventilator shutters, fixed type without sash bars , aluminium section weighing 0.55 kg/m including necessary joining cleats, glzing clips,rubber packing,anodised aluminium snap beading,screws etc and power coating of any colour(thickness of powder coating not less than 50 micron.) complete all as specified and directed by Engr-in-charge. |
| 46 | S&F of plain Aluminium composite panel 04mm thick with powder/rough PVDF coated, anti bacterial and fire proof any colour suitable for exterior and interior with complete all as specified and directed by Engr-in-charge. |
| 47 | M & L for 4.80 mm Sheet glass, ordinary quality and glazing with aluminium clip and beading in square exc 0.5 sq. m in each pane all as specified and directed. |
| 48 | M & L for 4.80 mm Sheet glass, ordinary quality and glazing with aluminium clip and beading in square n exc 0.5 sq. m in each pane all as specified and directed. |
| 49 | S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 50 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 51 | S & F Mild steel framed work as in grills, grating etc with end of bars shoulered and riveted or forged into spikes framed guard bars, barred iron doors etc, conforming to FE-290, Gde-E-165 all as specified and Directed |
| 52 | Demolition of Brickwork or stone/ boulder masonry, built in cement/lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed. |
| 53 | M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed. |
| 54 | S&F in rep PVC (SWR) WC connector 110mm dia with lip ring all as specified and directed. |
| 55 | Supply & Fix in repair Vitreous China Squatting pan 'Orissa pattern' size 580 x440 mm white with integral foot rest all as specified and directed. |
| 56 | Supply & Fix in repairs 10 ltrs capacity PVC valveless syphonic action type dual flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete all as specified and directed. |
| 57 | S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers all as specified and directed. |
| 58 | Supply & Fix in repair vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified and directed. |
| 59 | S & F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 60 | Dismantling of CI soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings all as specified and directed. |
| 61 | S&F in rep PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls all as specified and directed. |
| 62 | S&F in rep PVC (SWR) bends any radius, bend 110mm dia with access door all as specified and directed. |
| 63 | S&F in repair PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches,wall or in floors all as specified and directed. |
| 64 | S&F in repair PVC bends any radius 75mm bore all as specified and directed. |
| 65 | S&F in rep PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement all as specified and directed. |
| 66 | S&F for 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required all as specified and directed. |
| 67 | S&F in repairs for Table Top Wash hand basin ,Size: 480X380X140mm complete all as specified and directed . Make :Jaquar (Model No JDS-WHT-25909) or equivalent model from Cera / Parryware. |
| 68 | S&F in repairs for Concealed Body for Single Lever Mixer wall mounted but without exposed parts, completed all as specified and directed. Make: Jaquar (ALD-CHR-233N) or equivalent model from Cera / Parryware. |
| 69 | S&F in repairs for allied bottle trap 250x 190 mm completed all as specified and directed. Make : jaquar (ALD-CHR-769L250x190) or equivalent model from Cera / Parryware. |
| 70 | S&F in repairs for towel ring square , completed all as specified and directed. Make: Jaquar (AKP-CHR-35721P) or equivalent model from Cera / Hindware. |
| 71 | S&F in repairs for towel rail 600 mm long completed all as specified and directed. Make : Jaquar(AKP-CHR-35711 PS) or equivalent model from Cera / Hindware. |
| 72 | S&F in repairs for wall mounted soap dispenser with glass bottle completed all as specified and directed. Make:Jaquar (AKP-CHR-35735P) or equivalent model from Cera / Hindware. |
| 73 | S&F in repairs for Glass shelf (600 mm long) completed all as specified and directed. Make : Jaquar (AKP-CHR-35771P) or equivalent model from Prayag Polymer Pvt ltd / Polytuff . |
| 74 | S&F in repairs for single piece water closet with 'P' or 'S' traps, including connecting to trap complete all as specified and directed. Make: Jaquar (SLS-WHT-6851S220PP) or equivalent model from Cera / Parryware. |
| 75 | S&F in repairs for Health faucet 1.2 m flex Tube W/H completed all as specified and directed. Make : Jaquar (ALD-CHR-573) or equivalent model from Cera / Parryware. |
| 76 | S&F in repairs for vignetter prime angle stop cock 15 mm completed all as specified and directed. Make :Jaquar(VGP-CHR-81053) or equivalent model from Cera / Parryware. |
| 77 | S&F in repairs for vignetter prime 2 way bib cock 15 mm completed all as specified and directed. Make :Jaquar(VGP-CHR-81041) or equivalent model from Cera / Parryware. |
| 78 | Material & Labour for light/Fan Point wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 79 | All as per item No. 78 here in before but for one 3 pin socket outlet 5/6 Amps three pin controlled by one switch on independent board complete all as specified directed. |
| 80 | All as per item No. 78 here in before One 3 pin socket outlet, 5/6 Amps on the same board with other switches, with cables 1.5sq. mm size |
| 81 | All as per item No. 78 here in before but for one 5 pin socket outlet 15/16 Amp and 5/6 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with PVC boxes complete all as specified. |
| 82 | All as per item No. 78 here in before one bell/buzzer point controlled by one bell push on the same board with other switches or independent with cables complete all as specified and as directed . |
| 83 | Supply and fixing in replacement of ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. |
| 84 | S&F in replacement of bell/buzzer push 5/6 Amp,flush type complete all as specified & as directed. |
| 85 | S&F in replacement of call bell ding dong electric AC, 240 volt, 50 HZ, surface type complete all as specified & as directed. |
| 86 | Supply & fixing in replacement of Modular switch 1 way 6A,1 module, 240 Volts complete all as specified & directed. |
| 87 | Supply & fixing in replacement of Modular switch 1 way 16A,1 module, 240 Volts complete all as specified & directed. |
| 88 | Supply & fixing in replacement of Modular Socket, 6A - 5 pin combined 2 module, 240 Volts complete all as specified & directed. |
| 89 | Supply & fixing in replacement of Modular Socket 6A/16A - 5 pin combined 2 module, 240 Volts complete all as specified & directed. |
| 90 | S&F in replacement of modular White cover plate with frame 8 module complete all as specified & directed. |
| 91 | S&F in replacement of modular White cover plate with frame 06 module complete all as specified & directed. |
| 92 | S&F in replacement of modular Metal flush box 6 module complete all as specified & directed. |
| 93 | S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, (Cool White) Surface mounting type with high efficiency PMMA diffuser soft glare free light of colour white/warm white as per requirement at site complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified & directed. |
| 94 | S&F in replacement of decorative outdoor wall mounted light with LED lamp 10 watt (CDL/WW) with all accessories and including connection up with twin core twisted with flexible copper conductor cable suitable size of 230 volts 50 Hz complete all as specified and directed. |
| 95 | Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm all as specified and directed. |
| 96 | Supply and fix in replacement of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and directed. |
| 97 | Supply and fix in replacement of sheet metal enclosures for DBs double door when MCBs to be used 230 volts 4 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board all as specified and directed. |
| 98 | S&F in replacement of MCB SPN having braking capacity 10KA, 32 Amps, 240 V complete all as specified and directed. |
| 99 | S&F in replacement of MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed. |
| 100 | S&F in replacement of wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 4 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 4 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 4 sqmm earth wire and 2 Run of 4 sqmm cable shall be measured as one run.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender