Tender For Special Repair Of Observation Cum Control Tower At Lpr, Provn Of Staircase For Admin Bldg No P-105 At Lpr And Provn Of Solar Water Heater For Bldg No T-24 Of Sqae(A) & Lpr Khamaria Under Ge (P) No 1 Jabalpur.
Tender Value
35.44 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
21 days left
EMD
71000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Observation Cum Control Tower At Lpr, Provn Of Staircase For Admin Bldg No P-105 At Lpr And Provn Of Solar Water Heater For Bldg No T-24 Of Sqae(A) & Lpr Khamaria Under Ge (P) No 1 Jabalpur.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L for Cement concrete type D2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 3 | M&L for 75 mm cement concrete Type C2 1:3:6 (40 mm graded aggregate) in plinth protection and even and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 5 | S&F Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, coloured tiles laid over and including with screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floor finishes, roofs complete all as specified and directed. |
| 6 | S&F Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, coloured tiles laid over and including with rendering of cement mortar (1:4) 10 mm thick for laying floor finishes, roofs complete all as specified and directed. |
| 7 | M&L for granite (of any type) tile 16 to 18 mm thick as in any position and similar works over and including screed bed or bedding layer of cement mortar (1:4) 10 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match coloured tiles laid over and including the shade of granite stone incl cutting, polishing, complete all as specified and directed. |
| 8 | M&L for Chequered cement concrete tiles with grey pigment cement and pigments 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, over and including screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floor finishes, roofs, complete all as specified and directed. |
| 9 | M&L for Complete removal of existing water proofing treatment of any description and in any position including PCC padding any thickness and cleaning, wire brushing, watering & removal of debris outside MOD. complete all as specified and directed. |
| 10 | M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in concrete padding laid to required slope incl finishing the concrete surface fair and even without using extra cement complete all as specified and directed. |
| 11 | M&L for 10 mm thick screed bed or bedding layer of mortar in cement mortar (1:4) for laying roof finish as padding finished with WPC 3% by weight of total cement, complete all as specified and directed. |
| 12 | M&L for Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/sqm on top of dry surfaces of finished cement mortar plaster complete all as specified and directed. |
| 13 | M&L for APP polymeric membrane min weighting 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric(wt not less than 150 gms/sqm laid on primed surfaces by torch application on method complete all as specified and directed. |
| 14 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI(solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete, all as specified and directed. |
| 15 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed. |
| 16 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of Cement plaster 1:6, rendering is to be finished even or smooth (without using extra lime or cementcomplete complete all as specified and directed. |
| 17 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in ceiling of Cement plaster 1:3, rendering is to be finished even or smooth (without using extra lime or cement complete all as specified and directed. |
| 18 | M&L for Providing and applying cement based wall care putty of appropriate thickness as required over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 19 | Material & Labour for preparation of new/old external surfaces of wall/ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces,complete all as specified and directed. |
| 20 | M&L for preparation on old surface for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on old work complete all as specified and directed. |
| 21 | M&L for preparation on new surface for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of primer complete all as specified and directed |
| 22 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, drain etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 23 | M&L for Brick work with subclass ‘B’ bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 24 | M & L for providing cement concrete B0 1:2:4 (12.5 mm graded aggregate) in fixing of holdfast complete all as specified and directed. |
| 25 | Taking down Chowkhat or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 26 | M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and directed. |
| 27 | M&L for Anodised aluminium window and ventilator shutters, fixed/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 28 | S&F bullet proof glass of thickness 40 mm in window and similar work including cutting to shape, drilling holes, screws as required including test certificate also, complete all as specified and directed. |
| 29 | Taking down Chowkhat or frames exc. 1.5 sq. m but not exc. 4 sq. m each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 30 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete all as specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 31 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 32 | S&F Butt hinges 100 mm, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed. |
| 33 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 34 | S&F for 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 35 | S&F aluminium handles, cast type, anodised 150mm size, complete all as specified and directed. |
| 36 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 37 | M&L for Cortex Tile made up of 'Wood fiber cement composite' 1mm width wood fiber 25mm thick covered with Acoustically Transparent Woven Fabric on the front side, with an option of colors ofsize 600x1200 mm having excellent noise absorption of 1 NRC(for the base panel) as per ISO: 354 Fire Ratings as per BS 476 Part 5,6 and 7 class 1 and P, water resistant and thermal insulated. Installed with PVC H Profile on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results, complete all as specified and directed. |
| 38 | M&L for Providing & fixing false ceiling with fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing complete all as specified and directed. |
| 39 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 40 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed. |
| 41 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 42 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 43 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed. |
| 44 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates by bolting, welding, etc. (Grade Fe 410 -W (Gde- E- 250) quality- A), complete all as specified and directed. |
| 45 | S&F Rolled mild steel in (Fe 410-W (Gde- E- 250) quality-A) Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete welded or bolted complete all as specified and directed. |
| 46 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed. |
| 47 | M&L for two coat of synthetic enamel pinting over a coat of red oxide, zinc chrome primer incl preparation of steel new surface over 10 cm width or girth, not otherwise described complete all as specified and directed. |
| 48 | M&L for Cement concrete type C2 1:3:6 (using 40 mm graded aggregate) in foundation filling and mass concrete complete all as specified and directed. |
| 49 | S&F Rolled mild steel in (Fe 410-W (Gde- E- 250) quality-A) framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering and stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete welding or bolting. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel handling door fittings and hanging; also fastening and fixing, complete all as specified and directed. |
| 50 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. complete all as specified and directed. |
| 51 | M&L for point wiring with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metalic conduit of size 19/20mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces for light point/fan point complete all as specified and directed. |
| 52 | ~ditto~All as per item No. 50 here in before but with one 3 pin, 5 amps, socket outlet on the same board. complete all as specified and directed. |
| 53 | ~ditto~All as per item No. 51 here in before but with one 3 pin, 5 amps socket outlet on independent board. complete all as specified and directed. |
| 54 | ~ditto~All as per item No 51 above but with 2.5 sqmm PVC insulated multi stranded copper conductor and 2.5 sqmm PVC insulated multi stranded copper conductor as earth continuity conductor for one socket outlet 15 Amps on independent board. complete all as specified and directed. |
| 55 | Supply & Fixing Modular type Switch single pole 16 Amps one way complete all as specified and directed. |
| 56 | Supply & Fixing Modular type socket out let 2 in 1, 6/16 Amps.complete all as specified and directed. |
| 57 | Supply & Fixing Modular type Socket out let 6 Amps. complete all as specified and directed. |
| 58 | Supply & Fixing Modular type Switch single pole 6 Amps one way complete all as specified and directed. |
| 59 | Supply and Fixing Ceiling Rose Surface PVC type 65 x 50 mm two to three terminals. complete all as specified and directed. |
| 60 | Supply & Fixing Smart bright Batten Series, LED luminaire using LEDs 22 watt, natural white, 2200 Lumen, THD max 10 % ,CRI min 80 % with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexible copper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed. |
| 61 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 62 | Supply and fixing LED street light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed. |
| 63 | Supply and fix stepped type electronic fan regulator flush type, two module on the existing phenolic laminated etc., as required, single pole, 240 volts, grade 120W watts, 2 Module heavy duty and ISI marked complete all as specified and directed. |
| 64 | Supply & Fixing sheet metal enclosure MCB DB double door single pole and neutral, 240 volts,8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and directed. |
| 65 | S&F MCB Single Pole and Neutral 240Volt upto 40 Amps, 'C' series,10KA breaking capacity complete all as specified and directed. |
| 66 | S&F MCB Single Pole 240Volt, upto 40Amps, 'C' series, 10KA breaking capacity complete all as specified and directed. |
| 67 | Earthing complete for various equipments with galvanised steel earth plate electrode 600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.I wire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on complete all as specified and directed.Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate. |
| 68 | Supply, installation and commissioning supply, install, testing and commissioning of solar water heater system (evacuated tube collector) based on indirect transfer of heat of capacity 200 LPD, vacuated tube collector (ETC) Borosilicate double-wall vaccum glass tubes, Apprx Tube size : 58 mm x 1800/2100 mm, selective coating of high solar absorption suitable for water temperatures up to 80 degree Celsius, storage tank : capacity : 200 Litres, Inner Tank : SS-304 stainless steel, outer cladding: Pre-coated GI/Aluminium, insulation : Minimum 50 mm PUF insulation, Corrosion-resistant construction with electrical back up 2 KW to 3 KW immersion heater, 230 V AC, Single phase, 50 HZ, Thermostat adjustable up to 80 degree celsius Thermal cut-out protection, MCB/MCCB with weatherproof control box complete all as specified and directed. |
| 69 | Supply and fixing Hot water pipe duly insulated with glass wool and aluminium cladding 15 mm bore IS marked including all fitting arrangement such as elbow ,bends,sockets,union etc required at site complete all as specified and directed. |
| 70 | Supply and fixing Hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore IS marked including all fitting arrangement such as elbow ,bends,sockets,union etc required at site complete all as specified and directed. |
| 71 | Supply and fixing 15 mm dia ,Bib taps,cast copper alloy with crutch or butterfly handle,screwed down ,screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 72 | Supply and fixing Rotational moulded polyethylene water storage tanks of capacity 500 Ltr (Cylindrical vertical with closed top) three layer hoisted and fixed in positio complete all as specified and directed. |
| 73 | Supply and fixing stop valves, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 20 mm dia all as specified and directed. |
| 74 | M&L for 25 mm thick cement concrete (1:2:4) type B1 ,using 20 mm graded crushed stone aggregate laid over roof as in platforms for water tanks ,finished even and smooth without extra cement complete all as specified and directed. |
| 75 | M&L for fabrication of angle iron frame stand with equal angle of size 40x 40x 6 mm suitable for solar water heater and fixing arrangement complete all as specified and directed |
| 76 | Schedule of credit of Amount Rs. 28,983.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender