Tender For Estimate Of Quantum Of Work For Construction Of Different Consumers Under Deposit Scheme Of In The Area Of Edsd-I, Bangarmau Under Edd -Iv, Bangarmau Unnao.
Tender Value
12.39 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
12 days left
EMD
12390
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Unnao → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate Of Quantum Of Work For Construction Of Different Consumers Under Deposit Scheme Of In The Area Of Edsd-I, Bangarmau Under Edd -Iv, Bangarmau Unnao.
BOQ
| Sl. No. | Item Description |
| 1 | Safe Carriage of following Materials from ESC Store Centre Unnao to work dump site/dump site to ESC Store along with loading unloading & proper stocking as per requirement. |
| 2 | PCC/STP Pole of size 8.5/11 mtr. |
| 3 | HT XLPE Cable 3x70 sq mm / 3X120 sq mm 11 KV |
| 4 | ACSR Weasel/ Rabit Conductor |
| 5 | Arial bunch Conductor 1X16 / 3X50 / 3X95/ 3x120sq mm |
| 6 | Distribution Transformer 25 KVA/ 63KVA/ 100 KVA 11/0.4 KV |
| 7 | Distribution Transformer 250 KVA 11/0.4 KV |
| 8 | 11 KV Pilfer proof metering cubical and CT/PT unit |
| 9 | 11 KV Cable Jointing Kit outdoor/Indoor of size 3x70/3x120 sq mm |
| 10 | Other loose line materials including GI/stay wire, double Pole accessories, complete stay &earthing, insulator, MS channel angle etc. |
| 11 | Erection of PCC/ STP Double Pole Structure including digging of pit and fitting of all accessories complete. |
| 12 | Erection of PCC/ STP Pole including digging of pits, fitting of all accessories with its cartage dump site as per RESPO norms. |
| 13 | Making of H.T./L.T. Section points for line tapping, by brackets, clamps & Making of T-off arrangement for including fabrication and fitting of all accessories. |
| 14 | Grouting OF PCC/STP Pole as per RESSPO norms with grouting materials. |
| 15 | Earthing of PCC/ STP Pole as per RESSPO norms. |
| 16 | Digging of pits, fixing, nuzzling and grouting of stay rods as per RESSPO norms with grouting materials. |
| 17 | Fabrication/ Modifications of MS Items, for making Sub Station/HT/LT Line for 25/63/100 KVA Distribution Transformer, Nuts & Bolts as per requirement of site conditions. |
| 18 | Placement of 11/0.433 KV Distribution Transformer newly constructed T/F on Double Pole Installation and commissioning of 25/63/100 KVA Transformer including lugs, Jumpering& connecting Earthing of body & neutral as per required. |
| 19 | Placement of 11/0.433 KV Distribution Transformer newly constructed T/F on Double Pole Installation and commissioning of 250 KVA Transformer including lugs, Jumpering& connecting Earthing of body & neutral as per required. |
| 20 | Laying of 11 KV cable size 3x70 sq mm/120 sq mm, dragging of trench 1050 mm, deep 520 vide, including all materials etc. /overhead on pole as required on site. |
| 21 | Fixing of outdoor/Indoor cable jointing kit of size 3x70/3x120 sq mm |
| 22 | Laying Stringing & sagging of HT line by ACSR Weasel Conductor including all related work as joints /jumpers and binding on Insulators as required. |
| 23 | Laying, stringing Aerial Bunched Cable 1x16 / 3x50/ 3x95/3x120sq mm including all related work as joints /jumpers and binding on Insulators as required. |
| 24 | Installation testing and commissioning New 11 KV Pilfer proof metering cubical in Metering Room and CT/PT unit on pole and Cable terimanison, connecting earthing etc. |
| 25 | Installation and commissioning of H.T. D.O. Fuse Set with Dropper Channel on new double pole as per RESPO norms. |
| 26 | Cable Hosting at Pole with GI Pipe & Clamps as per norms (GI pipe provided by Contractor.) |
| 27 | Laying, stringing, tensioning & final sagging Guarding of Earth wire/G.I. wire including of cross lacing (minimum 10 no. in each span) |
| 28 | Chopping of tree branches lying in the route of making new 11 KV / LT line. |
| 29 | Construction of T/F Plinth of size 2x2x1.5 m on a padding 0.25 M deeo in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick, brick work in ration 1:4 cement & cores sand in the hollow portion the sand should be filled from the ground level up to 15 centimeter below from the top of wall, cement, sand & brick ballasts should be filled up to 15 centimeter. Two nos. of channel 100x50 in length 1500 mm will be grouded, 0.35 CM. RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4. The T/Fs plinth should be plastered on all sides 12 mm thick in ratio 1:6 by cement and cores sand. (All the material will be arranged by the contractor) |
| 30 | Installation of wire mesh fencing around Transformer & 1 No. gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS flat of size 50x6 mm. Wiremesh of size 10 SWG rectangle type, its painting as per norms of RESPO. ( All the material will be arranged by the contractor) |
| 31 | Earthing of Neutral of Transformer, Transformer body and double pole by way of boring and lowering of ‘B’ class G.I. Pipe 1.5” dia from ground up to the water level (Minimum 20 Mtr. Deep) with a solid cone at the lower end of G.I. pipe. Connecting and bringing out contineous G.I. Strip size 32X6 mm. from the cone to the ground surface where it will be connected with G.I. pipe clamp from which Transformer neutral, Body & D.P. connection being done by G.I. Strip.(All the |
| 32 | Following Materials to be supplied by contractor |
| 33 | Holding clamps for PCC/STP with Nuts & Bolts. |
| 34 | Stay clamps for PCC/STP with Nuts & Bolts. |
| 35 | LT clamps for PCC/STP with Nuts & Bolts. |
| 36 | F-clamps for PCC/STP with Nuts & Bolts. |
| 37 | LT Shackle Insulator |
| 38 | Tainless Fuse unit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender