Tender For Strengthening Of Coe For I.O.T Based Control Room Under (Capex / Nabard) At Main C Us Shalimar, Skuast-K
Tender Value
1.37 Crore
Estimated cost
Bid Submission
29 Sep 2026
6 days left
EMD
2.75 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Strengthening Of Coe For I.O.T Based Control Room Under (Capex / Nabard) At Main C Us Shalimar, Skuast-K
BOQ
| Sl. No. | Item Description |
| 1 | Design, Supply, Installation, Testing and Commissioning of integrated 5-in-1 environmental sensor for polyhouse, complete in all respects, for simultaneous measurement of Air Temperature, Relative Humidity, CO₂ concentration, Light Intensity (LUX) and Atmospheric Pressure, with suitable measuring ranges and accuracy, industrial/agricultural-grade sensor assembly suitable for continuous operation under polyhouse environmental conditions, digital communication interface (RS485/Modbus RTU or equivalent), including mounting accessories, connectors, glands, termination accessories, complete cabling up to 15 metres from sensor to data logger/controller, installation, configuration, testing and commissioning, complete as required and as per OEM specifications. |
| 2 | Providing and supplying 40 mm dia rigid PVC pipe of approved make and quality, complete with all necessary PVC couplers, bends, elbows, joints, junctions, jointing materials, solvent cement and other required accessories/fittings, suitable for underground protection/routing of cables, complete in all respects as directed by the Engineer-in-Charge. |
| 3 | Earth work in excavation by manual means in trenches (6 pipes in one trench 600 mm wide & 450 mm Deep) for foundations, drains, pipes, cables etc. (not exceeding L'5 m in width) and for shafts, wells, cesspits and the like not exceeding IO sqm on plan, including dressing Of sides and ramming Of botton1S lift upto 1.5 m, including getting Out excavated earth and disposal Of surplus excavated earth as directed |
| 4 | Providing, supplying, installing, testing and commissioning of heavy-duty rain gun FC (19.5-34.5M WRD) 1.37-7.17LPS @2-6BAR OP including irrigation assembly, of approved/imported make, complete with heavy-duty service saddle suitable for the main irrigation pipeline, GI threaded outlet, GI riser pipe of upto 1 metre height, GI nipple, threaded adapters, reducer/coupler, union, bends, clamps, washers, gaskets and all other necessary pipe fittings and accessories required for connection to the mainline, including all jointing materials, supports and fixtures, complete in all respects to make the rain-gun irrigation system fully functional and ready for operation, as directed by the Engineer-in-Charge. |
| 5 | Providing, developing, configuring, integrating, testing and commissioning of customised software for complete integration of existing Netafim irrigation/fertigation systems/controllers along with all associated field sensors and connected devices into a common central monitoring and control platform, including communication/interface/API/protocol integration as supported by OEM, configuration and mapping of all Netafim controllers, irrigation and fertigation equipment, valves, pumps, filters, dosing/fertilizer units and all connected sensors; acquisition, processing and display of all available real-time parameters including soil, environmental, irrigation, flow, pressure, level, temperature, humidity, EC, pH and other available sensor data; device-wise and sensor-wise dashboards, equipment status, operating parameters, alarms and fault indications, historical data logging, trend graphs, reports, data storage, user authentication and access control, remote monitoring/control wherever supported, complete configuration, testing, commissioning, documentation and training, including all software, /API integration charges and incidental services necessary for seamless operation, complete in all respects as per OEM specifications and directions of Engineer-in-Charge. |
| 6 | Providing, supplying, laying and installation of inline drip irrigation laterals 16MM 2/4 LPH 30/40CM CL2-PC, manufactured from high-quality UV-stabilized LDPE material, with factory-fitted pressure-compensating/non-pressure-compensating inline emitters at specified spacing, suitable for agricultural/polyhouse irrigation, complete with all other accessories required for proper connection and operation, including laying, alignment, fixing, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 7 | Providing, supplying and installing 16 mm dia mini lateral valve/cock, made of high-strength UV-stabilized engineering plastic, suitable for drip irrigation laterals, with barbed ends for secure connection to 16 mm lateral pipe, providing positive ON/OFF flow control, complete with necessary grommet/take-off, connectors, sealing components and other accessories, including fixing, connection, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge |
| 8 | Providing, supplying, installing, testing and commissioning of industrial-grade EC (Electrical Conductivity) and pH sensors/probes suitable for installation in polyhouse fertigation/nutrient solution tanks, comprising corrosion-resistant and waterproof sensor probes, suitable sensor holders/immersion fittings, connecting cables, connectors, calibration accessories and necessary mounting hardware, compatible with the fertigation/automation controller for continuous monitoring of nutrient solution EC and pH values, including installation, calibration, wiring, connection, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 9 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge .External work including trenching, refilling etc. |
| 10 | 100 mm nominal Outer dia pipes. |
| 11 | 75mm nominal outer dia pipes. |
| 12 | 50 mm nominal Outer dia pipes. |
| 13 | 40 mm nominal Outer dia pipes. |
| 14 | 25 mm nominal Outer dia pipes. |
| 15 | 20 mm nominal Outer dia pipes. |
| 16 | Steel work welded in built up sections\framed work, including cutting,hoisting, fixing in position and applying a priming coat Of approved steelprimer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 17 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand) |
| 18 | Extra for plastering done on moulding cornices or architraves including neat finish to line and level In two coats |
| 19 | Providing and applying decorative cement mortar moulding consisting of two bands of approved profile and size, in cement mortar 1:4 (1 cement : 4 fine sand), including forming, shaping with templates, necessary centering/scaffolding, finishing with neat cement coat, curing complete, as per architectural drawings and directions of Engineer-in-charge. |
| 20 | Providing and laying Vitrified tiles in floor with different sizes(thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of tile 600x600 mm |
| 21 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of tile 600x600 mm |
| 22 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and asdirected by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 23 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge for Granite Work |
| 24 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 25 | Providing and applying high-build exterior decorative wood texture finish on cement plastered curved walls using acrylic texture system, including surface preparation, application of primer, base coat of texture putty to required thickness (2–3 mm), forming of wood grain pattern using approved tools, application of suitable wood shade colour and protective top coat, complete in all respects including scaffolding, curing and as per manufacturer specifications and directions of Engineer-in-charge. |
| 26 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 27 | 12mm cement lime plaster of mix: 1 : 1 : 6 (1 cement : 1 lime putty : 6 fine sand) |
| 28 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 6 pin 15/16 A socket outlet |
| 29 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3pin 5/6 A socket outlet |
| 30 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. |
| 31 | Wiring for light/ power plug with 4X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 2 Nos. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. |
| 32 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required. |
| 33 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. (but without charcoal/ coke and salt) as required for Solar |
| 34 | Supplying, Installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round / square/ Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends 8-10 Watt |
| 35 | Supplying, Installation, Testing & Commissioning 70 watt of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, |
| 36 | Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66 |
| 37 | Supplying Installation, Testing and Commissioning of LED RGB/RGBWW/ RGBNW/ RGBA/RGBW suitable for exterior use having IP68 rating (as per site requirement). Flexible light strip of 5 mtr standard length with 12-15 Watt per meter. |
| 38 | Providing, supplying and fixing 3 mm thick CNC laser-cut decorative mild steel (MS) sheet/jali of approved pattern and design, including CNC laser cutting, cutting and shaping, edge finishing, fabrication and welding , grinding, fixing in position with necessary fasteners, applying one coat of approved steel primer and two coats of approved synthetic enamel paint, including all materials, labour, tools, equipment, scaffolding and incidental works, complete in all respects as directed by the Engineer-in-Charge. |
| 39 | Providing comprehensive repair and servicing of existing polyhouse exhaust/ventilation fans, including dismantling, inspection, cleaning, testing and rectification of fan motor, bearings, shaft, impeller/blades, fan guard, shutter/louver, electrical terminals, wiring and associated components; replacement of minor consumables and defective fasteners wherever required; lubrication, alignment, reassembly, testing and commissioning of the fan for smooth, safe and efficient operation, complete in all respects as directed by the Engineer-in-Charge. |
| 40 | Providing, supplying, laying, testing and commissioning of 3 Core × 16 sq.mm aluminium conductor, 1.1 kV grade, XLPE insulated, PVC sheathed, steel armoured and PVC sheathed power cable, laid from pump control panel/starter to pump motor through cable trench/cable tray/conduit as required, including cable dressing, clamping/supporting, identification and necessary protection; including making end terminations at both ends with suitable brass compression glands, aluminium lugs, gland accessories, insulating materials and heat-shrink sleeves; including connection at pump control panel/starter and pump motor terminal box, testing for continuity, insulation resistance and phase sequence, and complete testing and commissioning of the cable installation, all complete in every respect as directed by the Engineer-in-Charge. |
| 41 | Supplying, Installation, Testing and commissioning of indoor Wireless Access Point for Low Density use having features and specifications etc. as mentioned here under - Dual-band Wi-Fi6 (802.11ax) 574Mbps (2.4GHz) + 1200Mbps (5GHz), WI-FI 6 Certified, 1 x RJ45 console port, 1G LAN POE Port, factory reset, WPA/WPA2/WPA3™ Personal/Enterprise, WEP 64/128-bit, |
| 42 | Supplying, Installation, Testing and commissioning of indoor port Layer 2 Non-PoE Network Switch |
| 43 | Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel 1 run of cable |
| 44 | Supplying, installation, Testing & Commissioning of 2kVA capacity at full load UPS/invertor system suitable for Single Phase input, Single Phase output AC Supply. battery bank suitable for 30 minutes |
| 45 | Supplying, installation, Testing & Commissioning of 75 inch Touch Panel With OPS of Standard make(LG/Samsung/Sony) |
| 46 | Supplying, installation, Testing & Commissioning of 32 inch wall mounted Touch panel including cabnit |
| 47 | Supplying, installation, Testing & Commissioning of 42 inch or more KIOSK With Windows based PC |
| 48 | Printing works for All Main Door Windows of sub control & Main coProviding and fixing high-quality digitally printed self-adhesive decorative/vinyl film of approved design, colour, pattern and content on the existing door shutters of 3 (three) Sub-Control Rooms and 1 (one) Main Control Room, including preparation and cleaning of door surfaces, measurement, computerised graphic/design work, high-resolution digital printing, lamination/protective coating where required, cutting to required sizes, application with suitable adhesive, removal of air bubbles and wrinkles, edge finishing and all necessary labour, tools, access/scaffolding and incidental materials, complete in all respects as per approved sample/design and directions of the Engineer-in-Charge.ntrol Room |
| 49 | Note:-The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site work and all extra charges including dewatering if any during the execution of work complete in all respects. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender