Tender For Construction Of Community Hall At C R Colony Village At Karadikulam Panchayat In Kayathar Block In Kayathar Block
Tender Value
53 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
13 days left
EMD
53000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Hall At C R Colony Village At Karadikulam Panchayat In Kayathar Block In Kayathar Block
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Community hall at C R Colony Village at Karadikulam Panchayat in Kayathar Block |
| 2 | Earthwork excavation and depositing on bank with initial lead and lift in hard gravelly soil for foundation etc. complete. |
| 3 | Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyance of all materials to site and labour charges etc. complete. |
| 4 | Brick work using country bricks of size 83/4\\"x41/4\\"x23/4\\" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction. |
| 5 | Filling with Collected Gravel including all labour charges etc. |
| 6 | Supplying and erecting shttering including necessary support for plane surface in foundation Basement and Roof labs strutting upto 3.29M height for plane surfaces for floors for RCC column footings columns plinth beam and connected with foundations (Below Ground level) |
| 7 | Supplying and erecting shttering including necessary support for plane surface in foundation Basement and Roof labs strutting upto 3.29M height for plane surfaces for floors for RCC column footings columns plinth beam and connected with foundations (Above Ground level) |
| 8 | Supplying, fabricating and placing in position mild steel or ribbed to steel and all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. complete. |
| 9 | RCC 1:1.5:3 using 20mm HBG metal including cost and conveyance of materials and labour charges etc. complete |
| 10 | Weathering course with best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be listed) over the RCC roof slab in the proposition being brickjelly to lime 32:12:1/2 by volume and laid over into a single layer and cons |
| 11 | Finishing the top of the roof with one course of Machine PressedTiles of size 23 cm x 2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement us including all charges etc. |
| 12 | Paving the floor with best quality Vetrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 13 | Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) |
| 14 | Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complete |
| 15 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work. (Based on SoR 2024-25) |
| 16 | Plastering with CM 1:5 mix 12mm thick including cost and conveyance of all materials to site and labour charges etc. complete. |
| 17 | Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete |
| 18 | Provision for Cuddapa Slab 40mm thick including all charges etc. |
| 19 | Supplying and fabricating and fixing MS grill works to windows and grill gate using necessary MS flst for inner and outer members should be fixed to window frames |
| 20 | Painting two coats with Interior Emulsion & Exterior Emulsion using best quality of Emulsion, Brushs, scaffolding charges etc. complete |
| 21 | Electrical Arrangements: |
| 22 | Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable colour for open PVC light point/Fan Point SD 20 |
| 23 | Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm T.W. switch box in flush with wall, covered with nylon sheet of 3mm thick 5 Amps 3 pin non - interlocking C.S. Plug top with painting of suitable colour for open PVC plug point.- SD -36. |
| 24 | Supply and run of 2 of 6 sq. mm ( 84/0.30) polythene insulated and PVC unsheeted S.C. Alu cable of 1100 V on 7/20 Gi bearer wire for Service Connection Main - SD.64 |
| 25 | Supply and run of 2 of 4 Sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in 25mm dia GI Pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and and supports for mains SD-69 |
| 26 | Supply and fixing of fancy glass shade and 11W CFL BH point. SD-80 |
| 27 | Supply and fixing of W.T. Bulk head fitting complete with guard suitable for lamp with 40 W bulb with PVC unsheated leads from terminal to the fitting - SD. 83 |
| 28 | Supply and fixing of single box type 4,40w flourecent tube fitting with with copper choke and condensor SD. 88 |
| 29 | Supply and Fixing of 1200 MM (48\\")Ceiling fan includingn cost and conveyance of all materials and labour cherges etc complete. SD-110 |
| 30 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD-125 |
| 31 | Supply and fixing of 32 Amps MCB switch of 500V grade with Fuse and Nutral on suitable T.W. board with painting of suitable colour with PWD Earthing SD No.144 |
| 32 | Construction of Septic Tank |
| 33 | Earth work excavation and depositing on bank with in initial lead of 10 mt and initial lift of 2mt in Hard Gravelly soil for foundation as per specification |
| 34 | Cement Concrete 1:4:8 mix using 40 mm ISS H.B.G. metal including cost and conveyence of all materials to site and all other albour charges etc., completed. |
| 35 | Brick Work in C.M 1:5 mix using good quality of country bricks including cost and conveyence of all materials to site and all other labour charges etc., completed. |
| 36 | Supply and errection of steel centering for all R.C.C items of works including hire charges and labour charges for errection etc., completed. |
| 37 | Supplying and fabrication of steel including cost and conveyence of all materials to site and all other labour charges for straightening ,cutting, bending , placing in position tying etc completed. |
| 38 | Reinforced Cement Concrete 1:1.5:3 mix using 20 mm ISS HBG metal including cost and conveyence of all materials to site and all other labour charges etc., completed. |
| 39 | Plastering with cement mortar 1:5 mix 12mm thick including all cost and conveyance etc., complete. |
| 40 | Plastering with cement mortar 1:3 mix 12mm thick including all cost and conveyance etc., complete. |
| 41 | Supply and filling of 40mm brick jelly including cost and conveyence of all materials to site and all other labour charges etc., completed. |
| 42 | Providing Water Supply and Sanitary arrangements and Rainwater |
| 43 | Provision for Indian Water Closet |
| 44 | Provision for European Water Closet |
| 45 | Provision for Water Supply Specials (TWAD Rate) |
| 46 | 2000 ltr HDPE tank |
| 47 | 15mm Tap |
| 48 | Mirror 600 x 450 mm size |
| 49 | 110 mm PVC Pipe |
| 50 | 110 mm Elbow |
| 51 | 110 mm Tee |
| 52 | Wash Basin Colour (560 x 450) Ovel Shape |
| 53 | 25 mm PVC Pipes |
| 54 | 25 mm Elbow |
| 55 | 25 mm Tee |
| 56 | 32 mm PVC Pipes |
| 57 | 32mm Elbow |
| 58 | 32mm Tee |
| 59 | 25mm GM Gate Valve |
| 60 | 63mm PVC Pipes |
| 61 | 63mm Elbow |
| 62 | 63mm Tee |
| 63 | 50mm GM Gate Valve |
| 64 | Earthwork excavation and depositing on bank with initial lead of 10m and lift of 2m in narrow trenches for laying of pipesin Hard stiff clay,stiff black cotton,hard red earth,shales,murram ,gravel,earth mixed with small sized boulders etc... |
| 65 | Laying of 63mm PVC pipes to proper line and level including jointing but excluding cost of pipes |
| 66 | Refilling the excavated earth after laying and joining of pipes including all labour charges etc..complete |
| 67 | DOORS AND WINDOWS |
| 68 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un- plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. |
| 69 | UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 70 | UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Ventilator of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 71 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender