Tender For special Repair Of Garage Shutter At Offrs Md Accn At Cariappa Vihar, Addn/Altn And Provn Of Sliding Door In House No 8/169 In Cariappa Vihar Under Ge (West) Delhi Cantt-10
Tender Value
48.11 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
21 days left
EMD
96220
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Garage Shutter At Offrs Md Accn At Cariappa Vihar, Addn/Altn And Provn Of Sliding Door In House No 8/169 In Cariappa Vihar Under Ge (West) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down rolling shutters of any size incl all accessories of rolling shutter complete all as specified and directed. |
| 2 | Demolition of cement concrete (un-reinforced) of any description and in any position, including removal of rubbish out side complex (MOD land) , complete all as specified and directed. |
| 3 | Excavating in post holes in soft loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 4 | M&L PCC (1:3:6) type using 20mm graded stone aggregate as in foundations, mass filling , sub base and the like complete all as specified & directed. |
| 5 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe.290.Gde-E-165 complete all as specified and directed. |
| 6 | M&L for 1.25mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as spcified and directed. |
| 7 | M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified and directed. |
| 8 | Taking down cement plaster or any description including raking out joints, hacking for key, scrubbing down with water etc and removal of debris to a distance not exc 50 mts and depositing where directed. |
| 9 | M&L for 15 mm thick rendering in ready mix mortar on walls as whole or in patch on any faces of brick/concrete finished even and fair without using extra cement including necessary scaffolding and taking down old plastering complete all as specified and directed. |
| 10 | M&L for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint with roller over a coat of wall care putty (minimum thickness 1 mm) complete all as specified and as directed. |
| 11 | M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of redoxide primer including preparation of surface. Note- Quated Rate Shall Deemed to include Writing of Quater Number(as directed by Eng-in-Charge) on Each Gate Shutter complete all as specified and directed. |
| 12 | Demolition of Stone slabs and tiles ocomplete all as specified and directed.f any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 13 | M&L for Coloured Cement concrete Pre polished chequered tiles 30cm X 30cm X 25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 and cut and pointed with white cement and pigment complete all as specified and directed. |
| 14 | Dismantling of floor, hearth or wall tiling including internal layer of terrazzo dado and mortar bedding removing rubbish of the premises complete all as specified and directed. |
| 15 | Dismantling boarding and description (board/plywood) fixed in any position with screw, complete all as specified and directed. |
| 16 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 4 sqm but n.exc 8 Sqm each complete all as specified and directed. |
| 17 | Taking up or down GI tubing 15mm bore and connections including all fittings complete all as specified and directed. |
| 18 | Taking down cement plaster or any description including raking out joints, hacking for key, scrubbing down with water etc and removal of debris to a distance not exc 50 mts and depositing where directed. |
| 19 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 20 | M&L for light shade vitrified joint free tiles 7 to 8mm thick (square/rectangular) polished, area of each tile n exc 0.36 sqm, in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 etc complete all as specified and directed. |
| 21 | All as per item No 20 above but on vertical surfaces of wall over & incl CM (1:4) 10mm thick cement plaster etc. complete all as specified and directed. |
| 22 | M&L for coloured glazed ceramic tiles in vertical surfaces 600x300X7-8 mm thick joint free as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10mm thick in cement mortar 1:4 on brick wall of concrete surfaces and finished fair and even complete all as specified and directed. |
| 23 | M&L for coloured joint free non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including cement screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 24 | S &F 19/20 mm thick Medium Density Fibre Board(MDF), Pre Laminated exterior grade both side laminated board fixed to frame as in shutters to cup board and kitchen cabinet etc including 19/20x 2mm lipping /beading all around shutters and frame complete all as specified and directed . |
| 25 | S&F 40mm Continuous (piano) hinges, brass bright finish or electrogalvanised complete all as specified and directed . |
| 26 | S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as per specified and directed. |
| 27 | S&F of stainless steel handles 100 mm size for kitchen cabinet shutters complete all as per specified and directed. |
| 28 | Providing and fixing factory made uPVC white colour fixed door/window area exc 2 sqm each made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5.5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.) |
| 29 | Providing and fixing factory made uPVC white color Sliding door/window Two track area exc 2 sqm each made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5.5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 30 | S & F 5.00 mm thick Toughned glass exc 0.5 sqm in each pane fixed with clips and putty or with aluminium/upvc snap beading complete all as specified and directed. |
| 31 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, etc complete all as specified and directed. |
| 32 | M & L for cutting chases, pinning in brick wall for concealed GI pipe , cutting n.exc 10cm girth and making good to facings where required and pointing in cement mortar 1:3, complete all as specified and directed. |
| 33 | S&F GI tubing 15mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 34 | M&L for Precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregates as in lintels, landings, coverslabs, slab supported on walls,deck slabs, shelves and similar articles like cooking slab platform with plain faces set in CM 1:4 complete all as specified.. |
| 35 | M&L for 18-20 mm thick black granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in including 15mm thick screed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl polishing and rounding of edges complete all as specified and directed. |
| 36 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, ending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 37 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 land complete all as specified and directed. |
| 38 | S&F in repair sinks made of stainless steel 1 mm thick in kitchen with plugs, washers including coupling and waste pipe, fixed in RCC slab in kitchen and connecting to trap, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 39 | M&L for 15mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and fair without using extra cement and complete all as specified and directed. |
| 40 | M&L for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint with roller over a coat of wall care putty (minimum thickness 1 mm) complete all as specified and as directed. |
| 41 | S&F in repairs 10 ltrs capacity PVC valveless syphonic action type low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified. |
| 42 | S&F in repair vitreous china wash hand basin (flat black) white of size 550x400mm with pedestal excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets, waste pipe and coupling of suitable size complete all as specified. |
| 43 | S&F in repair 15mm dia brass chromium plated centre hole mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including connection pipe complete all as specified and directed. |
| 44 | S&F in repair 15mm dia wall mixer with conversion bend 2 in 1 chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed. |
| 45 | S&F in repair angle valve 15mm bore dia brass chromium plated fancy type, screwed down, new high pressure with lever type , chromium plated for iron pipe or unions complete all as specified and directed. |
| 46 | S&F in repair brass CP bib taps long body 15mm bore with lever type handle complete all as specified and directed . |
| 47 | S&F in repair brass CP 2 in 1 bib taps 15mm bore with lever type handle complete all as specified and directed . |
| 48 | S&F in repair arcylic glass shelf size 450mmx100mm with stainless steel railing fixed to wall with wooden plug and screws complete all as specified and directed . |
| 49 | S&F in repair 5.5mm thick sheet glass corner shelf 300 mm size in toilet and bath including stainless steel railing and CP bracket complete all as specified and directed. |
| 50 | S&F in repair 600x450mm frameless bevelled edge of 5 mm thick selected quality glass for wall and fixed with wooden plugs and 04 Nos CP brass screw and cup washer complete all as specified and directed. |
| 51 | S&F in repair brass chromium plated soap dish fancy type fixed to wall with CP brass screws complete all as specified and directed. |
| 52 | S&F in repairs chromium plated brass overhead shower rose 100 mm size swivel type with 225mm long chromium plated arm rod including fixing to steel pipe or union complete all as specified and directed . |
| 53 | S&F in repair Brass chromium plated toilet paper holder fancy type with flap fixed to wall with CP brass screws of standard size complete all as specified and directed. |
| 54 | S&F in repair brass chromium plated health faucet with 1.0 mtr SS flexile pipe 15 mm dia fixed to angle valve complete all as specified and and directed as per sample approved by GE. |
| 55 | S&F in repair vitreous pedestal pattern (European type) water closet pan white cast iron P or S trap type including provn of fixing bolt and plastic seat cover heavy duty with hinging device including 32mm dia flush pipe complete all as specified and directed. |
| 56 | S&F in repairs PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 57 | S&F in repair brass chromium plated steel tubular towel rail 20mm dia 'D' type 60cm long between flanges including a pair of CP brass bracket, complete all as specified and directed. |
| 58 | S&F in repair brass chromium plated grating 100 mm dia with or without waste hole, complete all as specified and directed |
| 59 | Taking down door/window frames with shutters with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each complete all as specified and directed. |
| 60 | Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) all as specified. |
| 61 | M&L for 35 mm thick decorative type factory made 100% Solid WPC (Wood Polymer Composite) Pre- laminated flush door Shutters of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant. WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. complete all as per specified and directed.Note : Material test certificate and authentication should be provided by the manufacturing company. |
| 62 | -Ditto - as per Item No 61 above but Skelton door fixed with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm complete all as per specified and directed.Note : Material test certificate and authentication should be provided by the manufacturing company. |
| 63 | M&L for factory made 100% Solid WPC (Wood Polymer Composite) door frame 125mm x 65 mm double rebated made from wood polymer composite (Single Extruded Process ) material comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives fabricated with meter joints after applying PVC solvent Cement & Screwed with fill body treated star headed screws having minimum frame density of 780 Kg / cbm and having good screw holding capacity (Screw Withdrawal strength of min 990 N), Minimum Compressive of 58 N/mm2, Modulus of elasticity 900 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant & Fixed in position with SS Dash Fastners/ Hold Fast of required dia and length . complete all as per specified and directed.Note : Material test certificate and authentication should be provided by the manufacturing company. |
| 64 | M&L for factory made 100% Solid WPC (Wood Polymer Composite) door frame 100 mm x 65 mm single rebated made from wood polymer composite (Single Extruded Process ) material comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives fabricated with meter joints after applying PVC solvent Cement & Screwed with fill body treated star headed screws having minimum frame density of 780 Kg / cbm and having good screw holding capacity (Screw Withdrawal strength of min 990 N), Minimum Compressive of 58 N/mm2, Modulus of elasticity 900 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant & Fixed in position with SS Dash Fastners/ Hold Fast of required dia and length . complete all as per specified and directed.Note : Material test certificate and authentication should be provided by the manufacturing company. |
| 65 | S&F 125 mm long stainless steel door handles 'D' curve ISI Marked complete all as specified and directed. |
| 66 | S&F 150 mm long high grade durable stainless steel barrel tower bolt of extruded section complete all as specified and directed. |
| 67 | S&F 300 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrude section or stainless steel complete all as specified and directed. |
| 68 | S&F 300 mm , ordinary rat tail rod pattern springs, including roller and rolller plate complete all as specified and directed. |
| 69 | S&F 100 mm long (size) stainless steel butt hinges, medium weight, cold rolled complete all as specified and directed. |
| 70 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm (having single rebate of size 30 mm)comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and including material & fixing in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 71 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 72 | S&F 100 mm Stainless steel butt hinges medium weight cold rolled fixed to PVC/FRP doors with SS screws complete all as specified and directed. |
| 73 | S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 74 | S&F 125mm long aluminium handles cast type anodised ISI Marked |
| 75 | M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium frame section for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 76 | M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/top hung type without sash bars, partly fixed type, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 77 | M&L powder coated aluminium 50 micron anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5 mm thickness weight of 1.07 Kg/m (section No. 20831 of JINDAL) and of shutter size 40mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick ( section No. 20737 of JINDAL) section, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with steel wire stapples 5mm thick plain glass including necessary fitting/fixture/aluminium snap beads complete all as specified. (Note : Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixtures and no extra shllabe apid separately. Cost of glass and wire cloth included herein complete all as specified and directed. |
| 78 | M&Lfor powder coated aluminium grill of powder coating of minimum 50 micron with aluminium mesh of size 50 mm x 50mm with square tube solid 6mm thick including aluminium channel of suitable size thickness of channel 1.5mm complete all as specified and directed. |
| 79 | S & F 4mm thick Figured glass ,pin head type and glazing with rubber gasket in sqr n exc 0.5 sqm in each pane etc complete all as specified and directed. |
| 80 | S & F 4mm thick ordinary sheet glass fixed with clips and putty or with aluminium snap beading complete all as specified and directed. |
| 81 | S&F 32mm dia PVC waste pipe 90 cm long for sink,WHB etc complete all as specified and directed. |
| 82 | M&L for preparation of old surfaces of ceiling and applying one coat of Oil bound distemper with roller complete all as specified and as directed. |
| 83 | M & L for complete removal of existing treatment from walls and applying two coats of Oil Bound distemper with rich matt finish with roller over wall care putty (not less than 1 mm thick) complete all as specified and directed.. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender