Tender For Construction For Diet Of Excellence Center At- Nanded, Panvel, Buldhana, Dhule, Jalgaon, Latur, Nagpur.
Tender Value
67.41 Crore
Estimated cost
Bid Submission
07 Oct 2026
14 days left
EMD
67.41 Lakhs
Bank guarantee accepted
Document Fee
35400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction For Diet Of Excellence Center At- Nanded, Panvel, Buldhana, Dhule, Jalgaon, Latur, Nagpur.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work Portion |
| 2 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. Spec.No. MORTH 201 |
| 3 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Spec. No. : Means Bd.A.1 Page No.259 |
| 4 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Spec.No. : Means Bd.A.2 Page No.259 |
| 5 | Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means Spec.No. : Bd.A.3, Page No. 259. |
| 6 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means Spec.No. : Bd.A.4, Page No. 259. |
| 7 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. Spec. No. MORTH 305 |
| 8 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. B Spec. No. As Directed By Engineer In Charge. |
| 9 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. Spec. As directed by Engineer in charge. |
| 10 | Filling in plinth and floors with approved excavated material in 15cm.to 20cm. layers including watering and compacting etc. complete. Spec. No Bd.A.10 Page No. 262 |
| 11 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Spec. No. Bd.A 11, Page No. 263 |
| 12 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No As director by engineer incharge. |
| 13 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.E.1 Page No. 287 |
| 14 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc). Spec. No. Bd. F.3 Page No. 298 and B.7, Page No. 38 |
| 15 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec. No. Bd.F.5 Page No. 300 And B7, Page No 38. Ground Floor |
| 16 | First Floor |
| 17 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38Ground Floor |
| 18 | First Floor |
| 19 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.F.8 Page No. 302 and B.7, Page No.38 Ground Floor |
| 20 | First Floor |
| 21 | Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.F.9 Page No. 303 and B.9, Page No.38Ground Floor |
| 22 | First Floor |
| 23 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc). Spec. No. Bd.F.11 Page No. 304 and B.7, Page No. 38Ground Floor |
| 24 | First Floor |
| 25 | Providing and laying cast in situ / Ready mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for R.C.C. waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood / steel formwork, steel props, laying / pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. : Bd.F. 13 Page No. 305. /I.S. 456 (2000)Ground Floor |
| 26 | First Floor |
| 27 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.E. 3/Page No. 288/I.S. 456 (2000Ground Floor |
| 28 | First Floor |
| 29 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No. Bd.F.17 Page No. 306.Ground Floor |
| 30 | First Floor |
| 31 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Spec. No. Bd.G. 1. Page No. 313Ground Floor |
| 32 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. Spec. No. Bd.H.1 Page No. 329 Ground Floor |
| 33 | Providing and constructing masonry in Autoclaved Areaclaved ( Celluar ) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size ( 625 x 240 x 225 ) mm in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in superstucture including,striking joints,racking out joints watering and scaffolding etc.complete. Spec. No As director by engineer incharge.Ground Floor |
| 34 | First Floor |
| 35 | Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size (625 x 240 x 100)mm in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in half brick thick wall including 2 hoop iron strips 25mm x 1.6mm at every third course,properly bend and bonded at ends scaffolding racking out\ joints and watering compete. Spec. No As director by engineer incharge. Ground Floor |
| 36 | First Floor |
| 37 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Spec. No. Bd.L.1 Page No. 367 Ground Floor |
| 38 | First Floor |
| 39 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.Ground Floor |
| 40 | First Floor |
| 41 | Providing patti / band 75mm wide on plastered surface 12 mm to15 mm thick in C.M.1:3 line and level including neat finishing scaffolding curing etc. complete.. Spec. No. As directed by Engineer in charge.Ground Floor |
| 42 | First Floor |
| 43 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Spec. As directed by Engineer in charge.Ground Floor |
| 44 | First Floor |
| 45 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. Spec. No. Bd. L.7 Page No. 369.Ground Floor |
| 46 | First Floor |
| 47 | Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Spec. No As director by engineer incharge.Ground Floor |
| 48 | First Floor |
| 49 | Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete Spec. No .BDM-22, Page No. 390Ground Floor |
| 50 | First Floor |
| 51 | Providing and laying machine cut machine polished kota stone flooring 25 mm to 30 mm thick and required width in plain / diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Spec. No. Bd.M.3 Page No. 380Ground Floor |
| 52 | First Floor |
| 53 | Providing sills of polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. Spec. No. Bd.M.29 Page No.391.Ground Floor |
| 54 | First Floor |
| 55 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Spec. No. Bd.M.12 Page No. 385.Ground Floor |
| 56 | First Floor |
| 57 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Spec. No. Bd.M.12 Page No. 385.Ground Floor |
| 58 | First Floor |
| 59 | Providing and laying Antiskid Ceramic tiles of approved quality of size 30cmx30cm and confirming to IS15622-2006 (Group-BIIA)for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Spec. No. Bd.M.13 Page One Number 386.Ground Floor |
| 60 | First Floor |
| 61 | Providing and laying ceramic tiles of having size 30cm. x 60cm. and confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Spec. No. Bd.M.13 Page One Number 386.Ground Floor |
| 62 | First Floor |
| 63 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. Spec. No . As directed by engineer- in- charg.Ground Floor |
| 64 | First Floor |
| 65 | Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m). Spec. No As director by engineer incharge.Ground Floor |
| 66 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand) Spec. NoBd. M-12 page One Number 385.Ground Floor |
| 67 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Spec. No. Bd.C.2 Page No. 275Ground Floor |
| 68 | First Floor |
| 69 | Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge. Spec. No. As directed by Engineer-In- CharGround Floor |
| 70 | First Floor |
| 71 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)First Floor |
| 72 | Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.).. Spec. No. Bd.R.5, Page Number 453Ground Floor |
| 73 | First Floor |
| 74 | Providing and fixing Valley Gutter of 22 B.W.G. (0.8 mm) Plain Galvanised Iron Sheets 90 cm Wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank) Spec. No. Bd. R. 10, Page No. 455.First Floor |
| 75 | Providing and fixing frame with / without ventilator of size as specified with country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. Spec. No As director by engineer incharge.Ground Floor |
| 76 | First Floor |
| 77 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S.65241983 having 6 mm dia bars 3Nos. And strips @ 250 mm c/c and fixing in wall with 6Nos. of hold fast of 12mm dia bars 500 mm long including primer and oil painting etc,complet e) frame size 60 mm x 125 mmGround Floor |
| 78 | First Floor |
| 79 | Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete. Spec. No. BD-T-11 and 12Page Number 482-83Ground Floor |
| 80 | First Floor |
| 81 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Spec. No. BD-T-34 Page Number 499.Ground Floor |
| 82 | First Floor |
| 83 | Supply and installation of ZMS (Nylon) cubicles of width and depth as per specifications/site drawings. Cubicle height will be 2003mm. ZMS Series Cubicles: Std Sizes (WxDxH): 900mmx 1550mmx 2003mm, (Height is including 150mm gap from bottom) Door Width-600mm ITEM DESCRIPTION Made from solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure >5MPa and temperature >120°C. All doors will be of single colour and made of 12mm thick HPL compact panel. All pilasters will be made of 12mm thick HPL compact panel. All intermediate partitions or dividers will be made of 12mm thick HPL compact laminate panels. Size of panels to be as per drawing. HARDWARE & ACCESSORIE Sare Semi-spherical (Top) head frame structure for surface protection. Size to be 50x32x1.6T. Corner joinery section, Size to be 40x16.5x1.8T. U-Channel Wall joinery section, Size to be 22x16x1.6T. Doors top per section, Size to be 21x12.5x1.6T. Stainless steel grade 304screws, Anti-rotation Nylon polyamide grade-6 expandable wall plugs, The Work shall complete as per drawing , under supervision of engineer in charge, etc complete.Ground Floor |
| 84 | First Floor |
| 85 | Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc comple. Spec. No. As directed by Engineer in charge.Ground Floor |
| 86 | First Floor |
| 87 | Providing and fixing in position (as per1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95x38.10x0.90mm at weight 0.637Kilogram/One Running Metre. with window frame bottom track section 92x31.75x1.30mm at weight 1.070Kilogram/One Running Metre.. Top and side track section 92x31.75x1.30mm at weight 0.933Kilogram/Running metre. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417Kilogram/One Running Metre. Inter locking section 40x18x1.10mm at weight 0.469 Kilogram/Running metre. and handle and top section 40x18x1.25mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete.With colour Anodising with boxGround Floor |
| 88 | First Floor |
| 89 | Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mmx 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete.Ground Floor |
| 90 | First Floor |
| 91 | Providng and fixing in position anodised extruded aluminum partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 128231990, laminated on both sides,Novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixed with aluminum glass clips 12 mm x 12 mm and rubber cushioning beading to glass partitions as per approved drawing etc. competeGround Floor |
| 92 | Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 m x 2.40 m with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150Kilogram capacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.CompleteGround Floor |
| 93 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Spec. No. Bd.U.1 Page No. 537Ground Floor |
| 94 | First Floor |
| 95 | Providing and fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex. Engineer is necessary before use). Spec. No As director by engineer incharge.Ground Floor |
| 96 | First Floor |
| 97 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete.. Spec. No As director by engineer incharge.Ground Floor |
| 98 | First Floor |
| 99 | Providing and applying priming coat on concrete/ masonary / asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. Spec. No As director by engineer incharge.Ground Floor |
| 100 | First Floor |
| 101 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. Spec. No As director by engineer incharge.Ground Floor |
| 102 | First Floor |
| 103 | Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Spec. No. Bd.O.5 Page No.405.Ground Floor |
| 104 | First Floor |
| 105 | Providing and applying priming coat over new wood and wood based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting, scaffolding etc. complete. Spec. No As director by engineer incharge.Ground Floor |
| 106 | First Floor |
| 107 | Providing cement based water proofing treatment to terraces (Indian water proofing or a like) with brickbats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brickbats on bottom layer in C.M.1:5 admixed with approved waterproofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brickbats with C.M.1:3 admixed with approved waterproofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10years Guarantee against leak proofnesson Court fee stamp paper of Rs. 500/- including ponding test etc. complete. Spec. No As director by engineer incharge.Ground Floor |
| 108 | Second And Tarrace Floor |
| 109 | Providing and laying Hyperplas Aluminium or equivalent polymeric multiple monolithic five layer water proofing flexible, pliable and high tensile strength membrane (3 Kilogram/Square Metre) which is comprise of top with \\"V\\" shape embossed 40 micron Aluminium foil to bear thermal expansion and avoiding delamination & consist of centre core of 90 micron thick High Molecular High density Polyethylene film (HMHDPE) which is protected on both the side with polymeric mix. Applying the membrane by thermofusing to roof & parapet after applying thin film of hot blown bitumen 85/25 or 90/15 grade @ 1.2 Kilogram/Square Metre maximum as per surface condition or Hyperplas primer @ 250 gms/Square Metre as per site condition on the surface to be treated with 10 cm overlapping including finishing etc. complete and covering guarantee of 7 years on stamp paper of Rs. 100/- and as directed by Engineer-in-charge. (Prior permission of S.E.in writing is necessary before inclusion of this item in estimate). Spec. No. As directed by engineer in charge.Ground Floor |
| 110 | First And Tarrace Floor |
| 111 | Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc.complete.Ground Floor |
| 112 | First Floor |
| 113 | Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. Spec. No. As directed by Engineer in charge.Ground Floor |
| 114 | First Floor |
| 115 | Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complet. Spec. No. As directed by Engineer in charge.Ground Floor |
| 116 | First Floor |
| 117 | Painting letters upto 20 centimetre height including cost of brushes, coir brushes dusting, cleaning etcetera complete. Spec. No. As Directed By Engineer In Charge. Only For Road Side Furniture. Spec .No. MORTH 801 Ground Floor |
| 118 | First Floor |
| 119 | Providing and fixing during laying in RCC Slab rectangular 2mm thick M.S. sheet fan hook box of size 180x100mm with required depth with holes or notches as required, bottom and top sides of 1.6mm M.S. sheet fixed with 3.5mm dia. round headed screws together with 12mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surfaceGround Floor |
| 120 | First Floor |
| 121 | Providing and fixing white european type wall-hung, Size 360mm x 360mm x 575 mm with flush valve having flow rate up to 6.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make including PVC soil pipe, vent pipe upto outside face of wall, 100mm dia PVC plug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.). Spec. No As director by engineer incharge. ( Jaquar / Hindware or equivalent make confirming Green Building Cirtificate )Ground Floor |
| 122 | First Floor |
| 123 | Providing and fixing 1st class white glazed earthenware orissa type w. c. pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. Spec. No As director by engineer incharge.Ground Floor |
| 124 | First Floor |
| 125 | Providing and fixing wall hung white wash basin of size 350 x 450 x 165 mm with approved make pillar cock, C.P. Angular stop cock long thread approved make continental including SS bottle trap of approved make having necessary pipe connection up to the outside face of the wall etc complete as directed by Engineer in charge. Spec. No. Bd.V.30 Page No. 565Ground Floor |
| 126 | First Floor |
| 127 | Providing and fixing coloured glazed earthenware lipped flat back/corner type urinal with PVC 5 liters flushing cistern with fittings,capacity with fittings, inlet pipe and stop tap, brackets for fixing the cistern, P.V.C. flush pipe with fittings including lead soil pipe, lead trap and soil pipe connection up to the outside face of the wall.Ground Floor |
| 128 | First Floor |
| 129 | Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Spec. No. As directed by engineer in charge.Ground Floor |
| 130 | Providing and fixing C.P. Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563 ) tube having wall hook with approved make including necessary sockets/ union nut etc. complete. Spec. No. As directed by engineer in charge.Ground Floor |
| 131 | First Floor |
| 132 | Providing and fixing C.P. sink cock with raised J\\" shaped swinging casted spout of approved make including necessary sockets/ union nut etc. complete. Spec. No. As directed by engineer in charge.Ground Floor |
| 133 | Providing and fixing C.P. Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete. Spec. No. As directed by Engineer in chargeGround Floor |
| 134 | First Floor |
| 135 | Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. Spec. No. As directed by Engineer in chargeGround Floor |
| 136 | First Floor |
| 137 | Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. Spec. No. As directed by Engineer in charge.Ground Floor |
| 138 | First Floor |
| 139 | Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets / union nut etc. complete. Spec. No. As directed by Engineer in charge.Ground Floor |
| 140 | First Floor |
| 141 | Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete. Spec. No. As directed by Engineer in charge.Ground Floor |
| 142 | First Floor |
| 143 | Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. Spec. No As director by engineer in charge.Ground Floor |
| 144 | First Floor |
| 145 | Providing and fixing 450 mm x 550 mm size superior type belgium mirror with 16mm dia. nickel plated towel rod etc. complete. Spec. No As director by engineer in charge.Ground Floor |
| 146 | First Floor |
| 147 | Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating , bend, connecting piece of UPVC pipe up to the outside face of wall , making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) Spec. No As director by engineer in charge.Ground Floor |
| 148 | First Floor |
| 149 | Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Spec. No As director by engineer in charge.Ground Floor |
| 150 | First Floor |
| 151 | Providing , laying and fixing ,jointing supreme eco- drain 110 mm SN 8 Nu- drain UPVC pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. Spec. No As director by engineer in charge.Ground Floor |
| 152 | First Floor |
| 153 | Providing , laying and fixing ,jointing Supreme Eco- Drain 160 mm SN 4 Nu- Drain UPVC Pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. Spec. No As director by engineer in charge.Ground Floor |
| 154 | First Floor |
| 155 | Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Spec. No. Bd.V.38 Page No.572.Ground Floor |
| 156 | Providing and laying concrete pipes of I. S. NP. class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No. Bd.V.41 Page No.573. Ground Floor |
| 157 | Providing and constructing brick masonry inspection chamber 60 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Spec. No. Bd.V.43 Page No.574. Ground Floor |
| 158 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. Spec. No. Bd.V.46 Page No.576. Ground Floor |
| 159 | Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. Spec. No As director by engineer in charge.Ground Floor |
| 160 | First Floor |
| 161 | Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. Spec. No As director by engineer in charge.Ground Floor |
| 162 | First Floor |
| 163 | Providing and fixing P.V.C. Rain water pipes of 160 mm outer diameter and having wall thickness of 2.2 To 2.7 mm confirming To I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C. C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. ( The contractor shall give 3 yrs guarantee bond for payment ). Spec. No As director by engineer incharge.Ground Floor |
| 164 | First Floor |
| 165 | Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete. Spec. No As director by engineer incharge.First And Tarrace Floor |
| 166 | Providing and fixing on walls / ceiling / floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge.Ground Floor |
| 167 | First Floor |
| 168 | Providing and fixing on walls / ceiling / floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in chargeGround Floor |
| 169 | First Floor |
| 170 | Providing and fixing on walls / ceiling / floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in chargeGround Floor |
| 171 | First Floor |
| 172 | Providing and fixing on walls / ceiling / floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in chargeGround Floor |
| 173 | First Floor |
| 174 | Providing and fixing on walls / ceiling / floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in chargeGround Floor |
| 175 | First Floor |
| 176 | Providing and fixing on walls / ceiling / floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in chargeGround Floor |
| 177 | First Floor |
| 178 | Providing and laying in trenches 50 mm dia. medium grade having embossed as ISI mark galvanised iron pipes of 5.17 kg / meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anticorrosive oil paint, 2 coats removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. Bd.V.5 Page No. 551.Ground Floor |
| 179 | First Floor |
| 180 | Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Spec. No. As directed by Engineer in charge.Ground Floor |
| 181 | First Floor |
| 182 | Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 litersGround Floor |
| 183 | Providing expansion joints in reinforced cement concrete framed structure (interior columns) with plain premoulded filler with confirming to IS 1838,1961, 25 mm thick with 75 mm wide and 1 mm thick stainless steel plate finishing etc. complete as directed. Spec. No. Bd K 1 AGround Floor |
| 184 | First Floor |
| 185 | Providing expansion joints in R.C.C. framed structure (exterior column) with plain premoulded filler 25 mm thick with 75 mm wide and 1 mm thick stainless steel plate and finishing etc. complete. Spec. No. Bd K 1 BGround Floor |
| 186 | First Floor |
| 187 | Providing expansion joints in R.C.C. framed structure (at floor level) with plain premoulded filler 25 mm thick with 75 mm wide and 1 mm thick stainless steel plat and finishing etc. complete. Spec. No. Bd K 1 CGround Floor |
| 188 | First Floor |
| 189 | Providing expansion joints in R.C.C. framed structure (at Terrace level) with premoulded filler 25 mm thick with 40 mm wide and 1 mm thick stainless steel plate as required, bitumen poured filler and finishing etc. complete as directed. Spec. No. Bd K 1 DFirst Floor |
| 190 | Providing and fixing bituminous pad 25mm thick for expansion joints in retaining wall, compound wall etc. complete. Spec. No. As directed by Engineer in charge.Ground Floor |
| 191 | First Floor |
| 192 | Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material up to a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/murum watering, ramming etc. complete. (Lift up to 1.5m). By Mechanical Means Spec.No. : Bd.A.6, Page No. 260. |
| 193 | Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank). |
| 194 | BASIC TEST OF CEMENTStanderd Consistency Fineness Spesific Gravity, Setting Time ( Initial And Final Compressive Strength, Soundness ) |
| 195 | BASIC TEST OF AGGREGATEWater Absortion, Spesific Gravity, Impact Value, Crushing Value. |
| 196 | Sieve Analysis. |
| 197 | BASIC TEST OF FINE AGGREGATEFinenss Modulus (Sieve Analysis), Silt & Clay Cntent. |
| 198 | Silt Factor |
| 199 | BRICKSWater Absortion ( Set Of 5 Bricks ), Compressive Strength ( Set Of 5 Bricks ) , Effloresecences ( Set Of 5 Bricks ) |
| 200 | CERAMIC TILE / VITRIFIED TILEWater Absortion, Modulles Of Rapture (Set Of 5 Tiles) |
| 201 | CONCRETEComprassive Strength Of C.C. Cube. ( Set Of 3 Cube ) |
| 202 | Concrete Mix Design (With all Tests on basic materials) |
| 203 | WATERPH Value, Sulphate & Chloride Content |
| 204 | WOODDensity, Moisture Content. |
| 205 | FLUSH DOORKnife Test, Adhasion Test, End EmersionTest |
| 206 | ALUMINUM SECTIONThikness, Mass Per Rmt |
| 207 | P. V. C. PIPESWeight Per Rmt, Diameter Of Pipe & Walll Thiknress Of Pipe. |
| 208 | STEEL BAR TESTINGUp To 16mm ( 9 Set Of 3 Bars ) |
| 209 | Concrete Paver BlockComprassive Strength Water Asorption (Set Of 8 Block), Fflexural test (Set Of 8 Bock), Resistance Test (Set Of 8 Block) |
| 210 | SOIL / MURUMSieve Analysis. |
| 211 | Compaction Test ( Proctor Density ). |
| 212 | C.B.R. Test ( Lab ) With compaction test. |
| 213 | HOLLOW / SOLID /AAC BLOCKSDensity Test . (Set of 3 Blocks ),Compressive Strength. (Set of 3 Blocks ),Water Absorption Test ( Set of 3 Blocks ) |
| 214 | Land Scaping and GardeningExcavation pit size 0.60 x 0.60 x 0.60m for planting small & medium ornamental plants/ large flowering/ shady trees (plant height 1 to 2 mtr.)/ palm varieties upto height 1 to 2 mtrs. in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs. |
| 215 | Excavation pit size 1.00 x1.00 x 1.00m for planting large flowering/ shady trees (plant height 2 to 4 mtr.)/ palm varieties of height (plant height 2 to 4 mtr.) in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs. |
| 216 | Murraya / Kamini Bag size 9'X11' Height Of Plant 20 cm to 45 cm |
| 217 | Cycas Bag size 18'X18' Height Of Plant 90 cm to 120 cm |
| 218 | Plumeria Alba Bag size 18'X18' Height Of Plant 240 cm to 270 cm |
| 219 | Ground Covers : - Specification:- Well Developed, Healthy , Free from Pest an DiseaseZebrina pendula Bag size 5\\"X 6\\"' Height Of Plant 10 cm to 20 cm |
| 220 | Wadelia Bag size 5\\"X 6\\"' Height Of Plant 10 cm to 20 cm |
| 221 | Chlorophytum Bag size 7\\"X8\\" Height Of Plant 15 cm to 20 cm |
| 222 | Rhoea Bag size 5\\"X6\\" Height Of Plant 10 cm to 20 cm |
| 223 | Shrubs : - Specification:- Well Developed ,Fresh, Healthy half in bloom, free from pest and diseasesSpider lily—Hymenocallis Bag size 7\\"X8\\" Height Of Plant 30 cm to 45 cm |
| 224 | Russelia Bag size 8\\"X10\\" Height Of Plant 30 cm to 45 cm |
| 225 | RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge . Spec. No. As directed by Engineer in charge. |
| 226 | Providing & constructing brick masonry inspection chamber 90 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. lid 65 kg with frame fixed in cement concrete etc. complete with R.C.C. Cover medium duty 140 kg with frame etc complete.. Spec. No. Bd.V.43 Page No.574. |
| 227 | Providing , laying and fixing ,jointing supreme eco- drain 160 mm SN 4 Nu- drain UPVC pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. Spec. No As director by engineer incharge. |
| 228 | Boring/drilling borewell of 300mm dia for casing/strainer pipe, by suitable method prescribed in IS:2800(partI), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level. |
| 229 | Supplying, assembling, lowering and fixing in vertical position in borewell, unplasticized PVC medium well-casing pipe of 150mm dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge. |
| 230 | Sky Walker DIMENSIONS: 1750mm (Length) x 500mm (Width) x 1750mm.(Height)•SAFE AREA : - 2.7 Mtr x 1.6 Mtr •Sky Walker Equipment manufactured from \\"A, B & C\\" class G.I. Pipe of•The main vertical support pipe is of 100 NB (OD 114.30mm) made from G.I.pipe •The foot rest support square tube is of 50 x 50 x 6mm thick M.S. material. The handle is made up from 25NB (OD 33.80mm) pipe. .•The connecting link pipes are made up from 32NB (OD 42.90mm) pipe. •The bearing bushes are used which are made from M.S. seamless pipe of 60.30mm O.D./ 8.73mm thickness (Schedule 160).• For foundation Main pipe supported with 25mm X 25mm M.S. angles of . 1.8 mm thickness and 25mm x 25mm MS square pipes of 1.8mm thickness.• The footrests are made from Aluminium Casting material of size 130mm X310mmX5mm thickness and mounted on M.S. Plate of Size 130mm X 310mm X 2.0mm thick.•Closing Caps are made up of high quality FRP material in attractive colors.•The pins used are made up of Ø 25mm bright material. •The bearings used are \\"6205\\" are permanent lubricated sealed bearing of reputed brand.•High tensile steel with galvanized nuts & bolts are used for assembly •The powder coating is done with Pure Polyester. |
| 231 | Leg PressDIMENSIONS:-2175mm (Length) x 450mm (Width) x 1560mm (Height)•SAFE AREA:-2.86 x 1.46Mir. •Leg Press Equipment manufactured from \\"A, B & C class G.I. Pipe of different sizes. •The main vertical support pipe is of 100 NB (OD 114,30mm) made from G.1. pipe.•The socket structure is made from 127 OD M.S. Seamless Pipe with thickness 5mm.This sleeve can be disassembled from main centre support pipe. •The remaining leg press pipes are of 32NI) (OD 42.00mm) G.I. pipe.•For foundation Main pipe supported with 25mm X 25mm M.S. angles of 1.8 mm thickness and 25mm x 25mm MS square pipes of 1.8mm thickness.•The seats and Back supports are fitted on the chair are made up of M.S. Sheet of size 330 mm X 300 mmX2 mm thickness which is deep drawn and pressed for uniform radius without joint. The footrests are made from Aluminium Casting material of size 130mm X310mmX5mm thickness and mounted on M.S. Plate of Size 130mm x 310mm X 2.0 mm thick.•The support structure of footrests made up of 25 NB (OD 33.80mm) G.I. pipe.•Closing Caps are made up of high quality Fiber reinforced Plastic material. The bearings used are of \\"6205zz\\" permanent lubricated sealed bearing of reputedBrand.•Stainless Steel (SS304) nut bolts are used for assembly. •The powder coating done with Pure Polyester powder,as directed by Engineer in charge |
| 232 | Thi-Chi SpinnerDIMENSIONS:-700mm (Length) x 1050mm (Width) x 1340mm (Height) (Two Wheel)• Thi-chi spinner Equipment manufactured from \\"A, B & C\\" class G.I. Pipe of different sizes. •The main vertical support pipe is of 100 NB (OD 114.30mm) made from G.1. pipe.•The Thi-Chi Spinner Ring is manufactured from 25NB (OD 33.80mm) and 20NB(OD 27.20mm) support pipe.•For foundation Main pipe supported with 25mm X 25mm M.S. angles of 1.8 mm thickness and 25mm x 25mm MS square pipes of 1.8mm thickness.•Closing Caps are made up of high quality FRP material in attractive colors. •The pins used are made up of 25 mm of bright material.• The bearing used is \\"6205\\" permanent lubricated sealed bearing of repute! brand.•Stainless Steel (SS304) nut bolts are used for assembly.•The nylon bush is used for handle knob. •The powder coating done with Pure Polyester powders as directed by Engineer in charge |
| 233 | Chest Press DoubleDIMENSIONS: 2010mm (Length) x 710mm (Width) x 2200mm (Height) •SAFE AREA: -3.6 Mtr x 1.76 Mtr.• Chest press Equipment manufactured from \\"A, B & C\\" class G.L. Pipe of different sizes. •The equipment is supported by of M.S. round plate of 0250 mm & 8mm thickness at bottom.•The connecting link pipes are made up from 25NB (OD 33.80mm) pipe.•The main vertical support pipe is of 100 NB (OD 114.30mm) made from G.I. pipe. The handle is made up from 32NB (OD 42.90mm) pipe.•The seat and back rest are supported on 32NB (OD 42.90mm) pipe. •To bearing bushes are used which are made from M.S, seamless pipe of 60.30mm O.D/ 8.73mm thickness (Schedule 160), 48.3mm OD/7mm thickness (Schedule 160) and also 60 mm OD soild var bush is used. •The foundation used for fixing the equipment is made from center pipe of 80 NB(OD 88.90mm) G.1 Pipe welded with M.S. round plate of 250 mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 1,8 mm thickness. •The seats and Back supports are fitted on the chair are made up of M.S. Sheet of size 330 min X 300 minX 2 mm thickness which is deep drawn and pressed.•Closing Caps are made up of high quality FRP material in attractive colors •Pins used of Diameter 25mm and 17mm are made up from bright material.•Stainless Steel (SS304) nut bolts are used for assembly. The powder coating done with Pure Polyester powders.as directed by Engineer in charge |
| 234 | Air WalkerDIMENSIONS:-1000mm (Length) x 525mm (Width) x 1500mm (Height), •SAFE AREA:-2.0 Meter x 1.8 Meter•Air Walker Equipment manufactured from \\"A , B&C class G.I Pipe of different sizes.•The mais vertical support pipe is of 100 NB (OD (114.30mm) made from G.I. pipe. •The leg movement frame is of 32NB (OD 42.90mm) made from G1, pipe.•The handle frame is of 25NB (OD 33.80mm) made from G.1. pipe.•The foundation used for fixing the equipment is made from center pipe of 80 NB (OD 88.90m) G.1 Pipe welded with MS. round plate of 250 mm & 10mm thick, Main pipe supported with 25mm X 25mm M.S. angles of 1.8 mm thickness and 25mm x 25mm MS square pipes of 1.8mm thickness.•Closing Caps are made up of high quality FRP material in attractive colors Pins used of •Diameter 25mm are made up from bright har material•The bearings used are \\"6205\\" permanent lubricated sealed bearing of reputed brand •The footrests are made from aluminium casting material, having sizes 130mm X 310mm X5mm thick with the sapport of 130mm X 310mm X 2.0mm thick MS plate•To bearing bushes are used which are made from M.5. seamless pipe of 60.30mm O.D. and 8.73mm thickness (Schedule 160) and also 60mm OD solid bar bush is used.•Stainless Steel (SS304) nut bolts are used for assembly. •The powder coating is done by Pure Polyester powder as directed by enginner in charge |
| 235 | Triple Seating TwisterDIMENSIONS: 1300mm (Length) x 1300mm (Width) x 1300mm (Height) •Triple Seating Twister Equipment manufactured from \\"A, B & C class G.L. Pipe of different sizes.•The main vertical support pipe is of 100 NB (OD 114.30mm) made from G.l. pipe. •The handle frame is of 25NB (OD 33.80mm) made from G.L. pipe.•The M.S. round plate of 0250 mm &imm thickness is welded at bottom.•The foundation used for fixing the equipment is made from center pipe of 50 NB(OD 8.90mm) G.l Pipe welded with M.5. round plate of 0250 mm & 10mm tilek. Main pipe supported with 25mm X 25mm MS angles of 1.8 mm thickness and 25mm x 25mm MS square pipes of 1.8mm thickness. •The supporting frame of the seated twister is of 32ND (OD 42.90mm) (made from G.I. pipe•The handle frame of seated twister is of 25NB (OD 33.80mm) made from G.I. pipe.•The twister plate is fitted on the supponing frame is made up of 10NB pipe and300mm x 8mm thickness M.S. Round Plate. •Closing Caps are made up of high quality FRP material.•Stainless Steel (55304) nut bolts are used for assembly.•The bearings used are \\"6205\\" permanem lubricated sealed bearing of reputed brand.•The powder coating is done by Pure Polyester powder as directed by Engineer in charge. |
| 236 | Sit Up Board Double PRODUCT DIMENSIONS:-2300mm (Length) x 1200mm (Width) x 700cm (Height) SAFE WORKOUT AREA:-26 Mirx 1.6 Mir The Sit up Board double Equipment manufactured from \\"A, B & C class G.L. Pipe of different sizes.The main vertical support pipe is of 100 NB (OD 114.30mm) made from G.1. Pipe. The socket structure is made from 127 OD M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main centre support pipe. The FRP top support frame is of 25NB (OD 33.80mm) pipe. FRP sheet top with uniform radius of 3mm thickness is molded on support frame. The Support pipe of sit up board is of 32NB (OD 42.90mm) pipe. Closing Cops are made up of high quality FRP material in attractive colors Fiber reinforced Plastic sheet top of 3mm thickness is molded on 25NB (OD 33.80mm) pipe frame which then welded on bottom support pipe. For foundation Main pipe supported with 25mm X 25mm M.S. angles of 1.8 mm thickness and 25mm x 25mm MS square pipes of 1.8mm thickness. -Stainless Steel (SS304) nut bolts are used for assembly. The powder coating is done with Pure Polyester powder.as directed by engineer in charge |
| 237 | Uneven BarDIMENSIONS:-3710mm (Length) SAFE AREA:-54Mir x 5.2Mu x 1300mm (Width) x 2850mm (Height) Uneven bar Equipment manufactured from \\"A, B & C class GL. Pipe of different sizes. The main vertical support pipe is of 100 ND (OD 114.30mm) made from G.I. pipe. The handles are made from 25ND (CD 33.80mm) & 32ND (OD 42.90mm) pipes. For foundation Main pipe supported with 25mm X 25mm MS angles of 1.8 mm thickness and 25mm x 25mm MS square pipes of 1.8mm thickness. Closing Caps are made up of high quality FRP material in attractive colors. Stainless Steel (55304) nut balts are used for assembly. The powder coating done with Polyester powders as directed by Engineer in charge |
| 238 | CycleDIMENSIONS:-940mm (Length) x 530mm (Width) x 1100mm (Height) Cycle Equipment manufactured from G.I. Pipe of different sizes. The main frame pipe is of 50 NB (OD 60.30mm) made from G.I-The handles are made from 25NB (OD 33.80mm) pipe. For foundation Main pipe supported with 25mm X 25mm MS. angles thickness of 1.8 mm. Closing Caps are made up of high quality FRP material is attractive colors The bearing used are of \\"6205\\" permanent lubricated sealed bearing of reputed brand. The powder coating done with Polyester powders as directed by Engineer in charge |
| 239 | Vending Machine:- Providing and suplying vending machine of Mild Steel With Powder Coating & Attractive Outer Body Loading Style: Horizontal And Front Loading Dispensing Rate: One Napkin At A Time Output: All Size Of Individually Packed Tri-fold Ultra-thin Sanitary Napkin Mounting Style: Wall Mounting 280 Mm Ultra-thin Trifold Sanitary Napkin, Requirement For Installation: Power Supply (for Electric Model Only) |
| 240 | Incinator Machine:- Providing and suplying incinator machine Operating Mode: Timing Based Push-button Operated Input: Soiled Sanitary Napkin Output: Less Than 2 - 5 Gram Ash Per Napkin Power Supply: Single Phase, 230 V 50 Hz, 5a / 15a Plug Control Type: Micro Controller Based Automatic With Power Saving Function Burning Chamber: Mild Steel / Stainless Steel 304 Cubical Type Heating System: Ceramic Coil Heater Construction: Mild Steel With Powder Coating & Attractive Outer Body Mounting: Wall Mounting Key-feature: Auto Power Off, Mcb For Safety, Excellent Thermal Protection Includes: Cowl Cover, Installation Kit - Manual And Machine Operating Manual Requirement For Installation: Power Supply & Provision For Air Exhaust |
| 241 | First Aid box:- Providing and suplying first aid box with, Wound Care & Bandages;- Adhesive bandages: (e.g., Band-Aids) in assorted sizesSterile gauze pads: Assorted sizes for larger cuts or draining woundsMedical adhesive tape: To hold dressings securely in placeElastic bandage: (e.g., ACE wrap) for stabilizing sprained wrists, ankles, or kneesTriangular bandages: To create an arm sling or apply direct pressure. Hygiene & AntisepticsAntiseptic wipes or solution: (e.g., hydrogen peroxide) for cleaning cuts and preventing infectionAntibiotic ointment: To apply on scrapes and minor woundsHand sanitizer: For keeping hands clean before administering first aidDisposable gloves: Non-latex examination gloves (at least 2-3 pairs. Medical ToolsTweezers: For removing splinters or ticksSharp scissors: For cutting tape, gauze, or clothingDigital thermometer: For monitoring feversInstant cold packs: To reduce swelling from sprains or bruising Medications & ReliefPain relievers: Acetaminophen or ibuprofenAntihistamines: Diphenhydramine or cetirizine for allergic reactionsAntacids: For digestive discomfortAnti-diarrheal medication: To manage digestive issuesHydrocortisone cream: To soothe rashes and insect bites. mportant ExtrasFirst aid manual: A quick guide on how to treat common injuriesEmergency contact list: A card with local emergency numbers and personal medical/allergy info. |
| 242 | RoyaltySand |
| 243 | Metal 40 mm Above |
| 244 | Soling & Murum |
| 245 | FURNITUREProviding & fixing in position, heavy duty fully upholstered Auditorium chairs 520 mm c to c tip-up type. Height of back should be less than 1030 mm with plastic protective cover on back and bottom having teak wood handles. Back to back distance is 1000mm. The auditorium chairs should be of following specifications 1. Powder Coated Heavy duty MS Stand. 2. Individually moulded , ergonomically designed seat and back cushions. 3.Moulded Polyurethane Foam cushion. PU foam density 48 – 52 Kilograms/cu.mtr 4. Moulded Polyurethane Foam manufactured in certified ISO 9001 facility to ensure consistency in density for longevity .5.Upholstered in Foam laminated stretch sandwich Fabric for clean finish and soft comfortable feel as per the colour & pattern selected by the client. 6.Seat and Back should have moulded synthetic protective cover. 7. Wooden or PU armrest 65mm x 20mm - 330mm long . 8.Mounted using Anchor fasteners.Ground Floor |
| 246 | First Floor |
| 247 | TB 1 : - Executive's Table @ 1800L x 900D x 750HTProviding & Fixing of Table @ 1800L x 900D x 750HT - TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as per drawing Spec.No. : As directed by Engineer-in-chargeGround Floor |
| 248 | First Floor |
| 249 | PD 1 : - Pedestal Unit @ 420L x 450D x 650HTProviding & Fixing of PEDESTAL @ 420L x 450D x 650HT :- To be made out of Complete Membrane consist of three Drawers as per drawing. Spec.No. : As directed by Engineer-in-chargeGround Floor |
| 250 | First Floor |
| 251 | CD : - Credestal @ 1200L x 450L x 650HT Providing & Fixing of LOW HEIGHT CREDESTAL @ 1200L x 450D x 650H :- To be made out of Membrane Finish ( 2 Openable Shutter & 3. Spec.No. : As directed by Engineer-in-chargeGround Floor |
| 252 | First Floor |
| 253 | TB 2 : - Executive Table @ 2250L x 2100D x 750HT including Low Height Credestal @ 1200L x 450D x 650HTProviding & Fixing of Table @ 2250Lx2100Dx750HT TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band. INCLUDING CREDESTAL @ 1200L X 450D X 650H :- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between ) as per drawing. Spec.No. : As directed by Engineer-in-chargeGround Floor |
| 254 | First Floor |
| 255 | TB 3 : - Free Standing Table @ 1500L x 600D x 750HTProviding and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, Spec.No. : As directed by Engineer-in-chargeGround Floor |
| 256 | First Floor |
| 257 | TB 4 : - Free Standing Table @ 1350Lx600Dx750HTProviding and fixing Table of Size 1350 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, Spec.No. : As directed by Engineer-in-chargeGround Floor |
| 258 | First Floor |
| 259 | TB 5 : - Free Standing Table @ 1200Lx600Dx750HTProviding and fixing Table of Size 1200 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, Spec.No. : As directed by Engineer-in-chargeGround Floor |
| 260 | First Floor |
| 261 | TB 6 : - Library Area Table @ 1350Lx750Dx750HTProviding & Fixing of FREE STANDING TABLE @ 1350Lx750Dx 750H TOP to be made of 25 mm thick Prelaminated particle board with edge band, BENT LEG to be CHROME FINISH as per drawing. Spec.No. : As directed by Engineer-in-chargeGround Floor |
| 262 | First Floor |
| 263 | TB 9 : - Conference Table @ 1800 x 900 x 750 mm Ht.Providing & Fixing of Main Table @ 1800Lx900Dx750HT - made up of 18+18mm Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick Prelaminated particle board with PVC edge band Access Flap:- For Wire manager 1 Nos., Spec.No. : As directed by Engineer-in-chargeGround Floor |
| 264 | TB 10 : - 12 Seater Reading Table for Library @ 3600Lx1200Dx750HTProviding and Fixing 12 Seater Reading Table for Liberary @ 3600Lx1200Dx750HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. Spec.No. : As directed by Engineer-in-chargeGround Floor |
| 265 | First Floor |
| 266 | PD 2 :- 3 DRAWER PEDESTAL UNIT @ 392L x 450D x 680Ht. mm.3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board Spec.No. : As directed by Engineer-in-chargeGround Floor |
| 267 | First Floor |
| 268 | ST 1 : - Low Height Openable Storage @ 900Lx450x750HTProviding and fixing Openable Steel Storage of 900 x 450 x 750Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk additional Top on top of storage as as per drawing Spec.No. : As directed by Engineer-in-chargeGround Floor |
| 269 | First Floor |
| 270 | ST 2 :- Medium Height Steel Storage @ 750Lx450Dx1200HTProviding and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk. as per drawi Spec.No. : As directed by Engineer-in-chargeGround Floor |
| 271 | First Floor |
| 272 | ST 3 :- Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. Spec.No. : As directed by Engineer-in chargeGround Floor |
| 273 | First Floor |
| 274 | Book Case with Glass Shutter @ 825Lx300Dx1650HTProviding & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing. Spec.No. : As directed by Engineer-in chargeGround Floor |
| 275 | First Floor |
| 276 | CH 1 : - Providing & Arrangemnt of High Back Chair , Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery. Spec.No. : As directed by Engineer-in chargeGround Floor |
| 277 | CH 2 : - Providing & Arrangemnt of High Back Chair - Tilt Mechanism with Multilocking, high density cushion seat composite leather with metalic silver finish base and arms with P.U. castors gaslift for height adjustment. Spec.No. : As directed by Engineer-in chargeGround Floor |
| 278 | First Floor |
| 279 | CH 3 : - Providing & Arrangemnt of MId Back Chair, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5prong/Nylon Base with Leather Upholstery. Spec.No. : As directed by Engineer-in chargeGround Floor |
| 280 | First Floor |
| 281 | CH 4 : - Providing & Arrangemnt of Mid Back, ECO CTS Mechanism, Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery. Spec.No. : As directed by Engineer-in chargeGround Floor |
| 282 | First Floor |
| 283 | CH 5 : - Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. Spec.No. : As directed by Engineer-in chargeGround Floor |
| 284 | First Floor |
| 285 | Stool for Lab and Class-IVProviding and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge.Ground Floor |
| 286 | First Floor |
| 287 | Alluminium foldable ladder for storeProviding & Fixing Foldable Alluminum Ladder 1500 mm. Ht. Spec. No. : As directed by Engineer-in chargeGround Floor |
| 288 | SF 1:- Sofa Set 3+1+1 Providing & fixing Sofa Set 3 + 1 + 1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms) Height (cms): 100 (cms) Weight (kgs): 66 (Kg) Seating Capacity: Five Seat. Spec. No. : As directed by Engineer-in chargeGround Floor |
| 289 | TB 11 : - Tea Table 900mm x 750mm x 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. . Spec. No. : As directed by Engineer-in chargeGround Floor |
| 290 | Excavation for road way in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts up to a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. (with prior permission of S.E.) |
| 291 | Excavation for Roadway In Hard Murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. Spec. No. MORTH 301 |
| 292 | Excavation for Roadway In Soft Rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. And spreading or stacking as directed. Spec. No. MORTH 301 |
| 293 | Excavation for roadway in hard rock by controlled blasting including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stocking as directed.(Inculding 50% Utilisation of useable Excavated material) |
| 294 | Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 295 | Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources) Spec. No. MORTH 305 |
| 296 | Single Bed @ 2025LX 1000DX 650H Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. Ground Floor |
| 297 | First Floor |
| 298 | Providing and fixing in position Gypsum board false ceiling with 12.5mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. Spec :As directed by Engineer in charge. Ground Floor |
| 299 | First Floor |
| 300 | Providing and Fixing of Mineral Fibre Suspended Ceiling System with Bioguard (Bevelled Tegular) EDGE TILES WITH 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 90%, Thermal Conductivity k=0.052-0.057w/mK, Colour White, Fire Performance UK Class0/ Class 1 (BS476 Part 6 and 7), in module size of 600x600x16mm with Anti Microbial coating on the face of the tile, suitable for Green Building application, with Recycled content of 34%. The tile shall be laid on precoated G.I. channel on XL 2 Clip having a web height of 32mm 32 with 15 mm wide T-section flanges colour white having rotary stitching on all T sections i.e. the Main Runner and 1200mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.7 Kilograms/M2 and pull out strength of 100 Kilograms. . The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved at GRIHA and BS 476 etc. complete.Ground Floor |
| 301 | First Floor |
| 302 | Supplying and fixing of 6mm thick Exterior Compact Laminate or High Pressure Laminate of approved colour by approving authority with UV resistant Decorative colour paper on both side typically made out of multiple layers of craft papers and then impregnated with thermosetting phenolic resins, on top of it melamine treated barrier paper and decorative paper and wear layer on both the sides saturated with melamine resins and then covered with UV resistant acrylic resin layer which makes it extremely durable and weather resistant compressed together on extremely high pressure and hardened with electron beam curing to get the total desired thickness of 6mm matching European standard specification as per EN 438 -part 6, protected with 60 Micron protective peel-off film on both side which in no case leave any adhesive mark over the panel surface after it is peeled off. Fixing of the same to be done on a supporting frame of 50 mm X 5 mm X 3 mm powder coated aluminium box section to be spaced horizontally and vertically in 600mm X 600mm grid and fixed to building structure as per design through 50mmX50mmX mm 5 mm MS angle bracket prefixed to masonry slab or columns with Hilti make anchor fastener along with all related hardware and fixtures. The panel should then be fixed on the Aluminium section with the help of pure polyester exterior grade colour coating rivets as per architectural drawings or as directed by Engineer-in- harge. Each panel should be riveted on substructure maintaining a gap of 6mm on all the sides between each Panel for Air circulation and expansion and contraction as per installation specifications provided by the manufacturer. The cost shall include all expenses related to storage, material handling, lifting, freight, labour, scaffolding etc as directed by Engineerin-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate)Ground Floor |
| 303 | First Floor |
| 304 | Providing, applying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 mm thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats,weather silicon sealent,backer rods etc .overall weight of the ACP shall not be less than 7.5 kg/sqm) Spec. No. As directed by engineer-in-chargeGround Floor |
| 305 | First Floor |
| 306 | Providing and fixing Acrylic name plate in any color acrylic. Letter english or marathi elevated/raised from surface upto 3mm. Letter made from 3 mm thick Copper color with mirror shine Acrylic sheet. The Copper shine and color of names will not fade or become dull with time. Plate and letter cutting is computerized Laser and CNC cutting for the perfect finish and shape. Spec. No. As directed by Engineer in charge.Ground Floor |
| 307 | First Floor |
| 308 | Dismantling flat wooden or A.C. Sheet and all type flase ceiling with frame work including stacking the materials as directed with all leads, lifts etc. complete. Spec.No. : As directed by Engineer in charge.Ground Floor |
| 309 | First Floor |
| 310 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. Spec.No. : As directed by Engineer in charge.Ground Floor |
| 311 | First Floor |
| 312 | Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc.. Spec. No. : As directed by Engineer in charge.Ground Floor |
| 313 | Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. Spec. No. : As directed by Engineer in charge.Ground Floor |
| 314 | Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete. Spec. No. : As directed by Engineer in charge.Ground Floor |
| 315 | First Floor |
| 316 | Removing doors and windows with frames and stacking and depositing useful material as directed with all leads lifts etc. complete.. Item Spec:As directed by Engineer in chargeGround Floor |
| 317 | First Floor |
| 318 | Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete.Ground Floor |
| 319 | First Floor |
| 320 | Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. etc. complete Ground Floor |
| 321 | First Floor |
| 322 | Removing earthen, stonewate pipe and stacking them as directed with all leads, lifts etc. complete. Spec.No. : As directed by Engineer in charge. Ground Floor |
| 323 | First Floor |
| 324 | Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.. Item Spec: As directed by engineer in chargeGround Floor |
| 325 | First Floor |
| 326 | Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc completeGround Floor |
| 327 | First Floor |
| 328 | Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete. Spec. no. As directed by Engineer in charge. Ground Floor |
| 329 | First Floor |
| 330 | Coveyance of Material / Debris at a distance of 5 km as directed by the Engineer In charge ( Lead charges of \\" Rubbish as per Lead statement C-1 page 560 of SSR 2022-23 for 5 Km |
| 331 | Electrical work |
| 332 | Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC(1-1-9) |
| 333 | Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC(1-1-10) |
| 334 | Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC(1-1-11) |
| 335 | Supplying and laying HMS PVC conduit FRLS grade 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC(1-1-12) |
| 336 | Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit(1-2-2) |
| 337 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 20 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.(1-2-6) |
| 338 | Supplying and erecting PVC box trunking of size 50x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX(1-2-11) |
| 339 | Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-1) |
| 340 | Supplying and erecting green colour earthing with 1x 1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-1) |
| 341 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) |
| 342 | Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) |
| 343 | Supplying and erecting mains with 4x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3) |
| 344 | Supplying and erecting green colour earthing with 1x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3) |
| 345 | Supplying and erecting mains with 4x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-4) |
| 346 | Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 347 | Supplying and erecting green colour earthing with 1x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-4) |
| 348 | Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.(1-6-1) |
| 349 | Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.(1-6-2) |
| 350 | Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-10) |
| 351 | Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-11) |
| 352 | Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.(1-6-23) |
| 353 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-36) |
| 354 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-38) |
| 355 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-40) |
| 356 | Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW(1-7-5) |
| 357 | Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG - PW/CW(1-7-5) (For point wiring in stair case with 2 way control point increase rate by 50% of point wiring.) |
| 358 | Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW(1-7-6) |
| 359 | Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW(1-7-26) |
| 360 | Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty..(2-1-5) |
| 361 | Supplying and erecting LED Panel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.(2-1-8) |
| 362 | Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty..(2-1-10) |
| 363 | Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.(2-1-15) |
| 364 | Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.(2-1-16) |
| 365 | Supplying and erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.(2-1-22) |
| 366 | Supplying and erecting Electronic type cordless call bell erected on T.W. board having portable bell push working on 9V D.C. battery and (effective range upto 45 meter) bell on 250 V A.C. supply.(2-3-15) |
| 367 | Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.(-10-13) |
| 368 | Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% without IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF(2-10-22) |
| 369 | Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.(2-11-5) |
| 370 | Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.(2-11-6) |
| 371 | Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. AP-WCR/WC(3-3-9) |
| 372 | Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)(3-5-1) |
| 373 | Supplying, installing, testing and commissioning of 3 kVA capacity online pure sine wave with backup time of 1 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS(3-7-3) |
| 374 | Supplying and erecting 12V/26Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.(3-8-9) |
| 375 | Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-2) |
| 376 | Supplying, erecting and marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-3) |
| 377 | Supplying, erecting and marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-10) |
| 378 | Supplying, erecting and marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-11) |
| 379 | Supplying and erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB(5-4-1) |
| 380 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB |
| 381 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW SWR/MCBDB(5-4-9) |
| 382 | Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) |
| 383 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB |
| 384 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB |
| 385 | Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 |
| 386 | Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB |
| 387 | Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB |
| 388 | Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB |
| 389 | Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB |
| 390 | Supplying, Erecting and Commissioning of 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB(5-6-5) |
| 391 | Supplying, fixing, and commissioning 2 pole, RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO(5-6-9) |
| 392 | Supplying and erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 400A(5-10-28) |
| 393 | Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.(6-1-1) |
| 394 | Supplying and erecting GI sheet 1.6mm (16 SWG) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for HV/EHV (11000 Volts) installation with compliance to IS 2551-1982(6-1-16) |
| 395 | Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1-19) (Proposed if required) |
| 396 | Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB |
| 397 | Supplying and erecting AC Three Phase Four wire Multifunction Energy Meter of Rating 10 - 60A, Class 1.0 with din rail / Panel mounting to measures and display parameters with RS485 Modbus communication port. mounting whole current operated meter to measures and display V, I, kWh, KVAh, KW, KVA, P.F, THD, RS 485 Communication port. Electrical parameters shall be available on com port with their mapping address open for third party software(6-3-19) |
| 398 | Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.(6-5-5) |
| 399 | Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.(6-5-6) |
| 400 | Supplying and erecting 35 kVAr, 3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP /APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection as per specification no CP-ED/APFC |
| 401 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 402 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 403 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 404 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 405 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 406 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 407 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 408 | Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.(7-11-6) |
| 409 | Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.(7-11-8) |
| 410 | Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP(9-1-1) |
| 411 | Supplying, installing & testing maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI(9-1-5) |
| 412 | Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete(1-6-15) |
| 413 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-34) |
| 414 | Supplying & erecting 10 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW |
| 415 | Supplying, Erecting and Commissioning of MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW(1-9-1) |
| 416 | Supplying, erecting & commissioning 10 pairs FR junction box with mouldedplastic enclosure as per specification no. WG-TW(1-9-11) |
| 417 | Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW(1-9-18) |
| 418 | Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete. |
| 419 | Supplying, Erecting and Commissioning of push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.(1-9-29) |
| 420 | Supplying, Erecting and Commissioning of IP telephone instrument as per specification complete.(1-9-30) |
| 421 | Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC(1-10-1) |
| 422 | Supplying and fixing 1 m length, UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-D in position as per specification No. WG-COC/PC(1-10-17) |
| 423 | Supplying and fixing 3 m UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-D in position as per specification No. WG-COC/PC(1-10-20) |
| 424 | Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WG-NWC/GBS(1-11-4) |
| 425 | Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.(1-12-1) |
| 426 | Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO |
| 427 | Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP |
| 428 | Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK(1-12-18) |
| 429 | Supplying, erecting and marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW- SWR/MCB(5-3-12) |
| 430 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-8) |
| 431 | Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 450 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP |
| 432 | Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP(13-6-2) |
| 433 | Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP(13-6-6) |
| 434 | Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS(13-7-6) |
| 435 | Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV(13-7-24) |
| 436 | Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV(13-7-35) |
| 437 | Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV(13-8-2) |
| 438 | Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL(13-8-4) |
| 439 | Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ(13-8-8) |
| 440 | Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV(13-8-13) |
| 441 | Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG(13-8-14) |
| 442 | Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS(13-8-15) |
| 443 | Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)(13-8-18) |
| 444 | Supplying, erecting, testing and commissioning manual call point (Pill box) with break glass push button and flip abort switch or agent release switch in metal enclosure complete as per specification no. FF-FAAS/MCP |
| 445 | Supplying, erecting, testing and commissioning hooters having high (100dB @ 1m) and low (94dB @ 1m) volume setting, group addressing facility allowing multiple sounders to be activated with CRCA enclosure complete as per specification no. FF-FAAS/HTR |
| 446 | Supplying, installing, testing and commissioning FRLS , XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU |
| 447 | Supplying, installing, testing and commissioning of 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories , 16x2 Character LCD Display, provision for zone wise contact and beep sound alarm, suitable to operate on 120-220 V AC, 0 - 49 Deg C, 93 ± 2 Percentage RH (non- condensing) at 32 ± 2 Deg C complete as per specification no. FF-FAAS/FACP |
| 448 | Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.(13-15-1) |
| 449 | Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.(16-1-6) (170X0.75X.0.5=63.75. Say 64) |
| 450 | Supplying and erecting ABC powder type fire exitinguisher as per IS: 13849/15683 of 6 kg capacity with necessary clamp for erection on wall (Non-CSR) |
| 451 | Supplying and Installation auto glow (Viewing up to 15 Mtr length) fire signages in PVC/Vinyl 4/6 mm thick sheet or as per sample approved by client viz fire doors, fire hose box, fire & electrical safety etc. Size 300 mm X 100 mm as per IS 12349-1988 |
| 452 | Supplying and Installation auto glow (Viewing up to 15 Mtr length) fir signages in PVC/Vinyl 4/6 mm thick sheet or as per sample approved by client viz fire doors, fire hose box, fire & electrical safety etc. Size 450 mm X 100 mm as per IS 12349-1988 |
| 453 | Providing and fixing of Emergency Exit Lights LED Beam-II with exit high glow LED White lamps working on battery 12 V 7.6 Ah for duration 4-5 hours (approx) wattage of LED lamp is 26 watt each 2 Nos. of lamp total wattage 52 Watts Weight of unit will be 5.4 kg input voltage 220 V AC 50 Hz Output Volatge 12 V DC the outer cabinet is powder coated, for safety purpose DC & AC fuse system is given in unit as per IS 9583-1981 |
| 454 | Supplying and erecting 20mm dia. corrugated flexible polypropylene conduit |
| 455 | Supplying and erecting 10m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.. |
| 456 | Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC |
| 457 | Supplying, fixing, and configuring 20 Ports + 4 SFP combo, Layer 2, GB managed ethernet switch, with web view/CLI erected in provided rack complete |
| 458 | Supplying and fixing POE adaptor to provide DC supply to ethernet devices as per specification No. WG-NAS/PEA |
| 459 | Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK |
| 460 | Supplying & erecting of High definition 4/5 Megapixel IP IR Dome Camera with following features Image Sensor : minimum 1/2.8\\" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520, Video Compression : H.264, H.265 or higher, at least Three individually, configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°, Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.duly erected in position on wall/ceiling/false ceiling/provided pole (mountingheight not more than 5 meter) etc with all accessories etc complete as perspecification no. CCTV-CAM. |
| 461 | Supplying & erecting of High definition 4/5 Megapixel IP IR Bullet Camera with following features Image Sensor : minimum 1/2.8\\" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520, Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°, 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°, 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°, Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital, Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight, Compensation, Highlight Compensation., Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification no. CCTV-CAM |
| 462 | Supplying, installing, testing & commissioning of 64 Ch Network Video Recorder (NVR), suitable connect Min. 64 IP Cameras, up to 5 Megapixel Resolution, with HDMI 1/VGA 1 and HDMI 2/VGA 2 outputs provided, Atleast one HDMI output of 4K resolution, atleast one VGA output with output up to 1920 × 1080, Support H.265 or higher, H.264, MJPEG, Supports Redundant Dual Power, Incoming Bandwidth 320 Mbps with minimum 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps selfadaptive Ethernet interface, support multi brand network Cameras, ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc. complete as per specificationss no. CCTV-NVR |
| 463 | Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD |
| 464 | Supplying & erecting 65\\" professional LED display with 1920 *1080 ( Full HD) Display, suitable for 64 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand andwiring connections etc. complete as per specifications no. CCTV-MON |
| 465 | Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV (1-3-14) |
| 466 | Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.(2-4-5) |
| 467 | Supplying and erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation.(5-2-5) |
| 468 | Supplying and erecting street light Wall bracket made from 40 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB |
| 469 | Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (5-3-1) |
| 470 | Supplying, erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (Note For use of XLPE insulation instead of FR-XLPE insulated armoured cable reduce rates by 5 %) (7-1-26) |
| 471 | Supplying & erecting FRP box of size 150mm x 125mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB |
| 472 | Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP(9-1-3) |
| 473 | Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP(9-1-4) |
| 474 | Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) |
| 475 | Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON(1-2-3) |
| 476 | Supplying, installing, testing and commissioning of 10 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 30 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG |
| 477 | Supplying, installing, testing and commissioning of 10 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 30 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG |
| 478 | Supplying and erecting switch disconnector fuse (SDF) switch 415V up to 63A, open execution, four pole AC23 A rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to IS/IEC 60947-3 Part-1/3 HRC - DIN type fuse, insulation voltage 1000 V for enclosing in panel with rotary handle for ON / OFF operation (without HRC fuse)(5-1-17) |
| 479 | Supplying and erecting static energy meter with 3 x 240V 50 Hz. AC supply 10 to 60 A, ISI mark, accuracy class 1.0 with backlit LCD display, (Measuring and display Trivector, V, I, kW, PF, Hz, Last month history of kWh and MD in kW) with special features like TOD, Tamper logging, Optical Communication Port & Display in absence of Power & with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested by electric supply company.(6-3-3) |
| 480 | Supplying and erecting three phase 10 to 60 A net meter DLMS compliance of accuracy class 1.0, 3 x 240V, 50 Hz, with backlit LCD display, optical port and RJ 232 port (measures import kWh, kVAh, export kWh, kVAh, Net kWh, kVAh, V, I, kW, 6 months history of energy) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.(6-3-13) |
| 481 | Supplying, installtion & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 40 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD(6-6-6) |
| 482 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 483 | Supplying and erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.(9-3-1) |
| 484 | Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).(16-3-7) |
| 485 | Supplying, Erecting, Testing and Commissioning of Screens Electric Spectrum Series Motorized Projection Screen (16:10) (Size - H108'' X W144'') Screen Material Active 3D, 4K Ultra HD, and HDR Ready ISF Certified for Accurate Color Reproduction – An Industry Standard for High-Fidelity Video Display Systems Not compatible with Ultra/Short-throw Projectors Standard black masking borders Also available in sound transparent material Available in the following diagonal sizes: 84\\", 100\\", 120\\" and 180\\" in 4:3 format, 84\\", 100\\", 110\\", 125\\", 150\\" and 180\\" in 16:9 format, 85\\", 90\\", 106\\", 128\\" and 142\\" in 16:10 format, Total Control Infrared (IR) remote control Detachable 3-way wall UP/STOP/DOWN switch Built-in 5-12 volt trigger port enables Drop/Rise operation to synchronize with the projector's power cycle 12 Volt Trigger Cable included Low-voltage internal IR Receiver Design and Installation Durable casing for wall/ceiling installations Includes wood screws and drywall anchors Bubble leveler included Ships fully assembled with 3-prong power connection ready to plug & play Quality and Reliability Infrared (IR) remote control Detachable 3-way wall UP/STOP/DOWN switch Built-in 5-12 volt trigger port enables Drop/Rise operation to synchronize with the projector's power cycle 12 Volt Trigger Cable included Low-voltage internal IR Receiver Green Guard Certified Make - Elite/Kristal/Logic (On Site 2 Year Warranty) (Rates are Sanction from SE nanded Est.No./JESD/OW/ 419 /2022-2023 Providing New Digital Audio Conference System & Video System at District Collctor Office DPDC Hall and Conference Hall Collector Office Jalna Tq.Dist.Jalna.( PART-A & B ) |
| 486 | Supplying, Erecting, Testing and Commissioning of WUXGA 3LCD Projector with Standard Lens & 4K Enhancement presents a new perspective on clarity, durability, and versatility. With the advanced C2Fine™ and 4K Enhancement Technology, projections are brought to life with vibrant colours in extreme resolution and vividness. Overcome the limitations of space constraints and project large and uncompromised images through the projector’s astoundingly short throw ratio of 0.35*. High Brightness, Beyond Full HD Resolution, , Powered Lens Portrait Projection , Flexible Installation, Edge Blending , Point Correction, Projection Technology:RGB liquid crystal shutter projection system (3LCD), LCD:Size; 0.76″ panel with D-MLA (D10, C2 Fine) Native Resolution; WUXGA (1920 x 1200), Brightness*2:White Light Output, (Normal/Eco):7,000lm / 5,600lm, Colour Light Output:7,000lm, Network:Wired LAN RJ45 x 1 (100Mbps) , Wireless Optional, Analog Input:D-Sub 15 pin; 1 (Blue)5BNC; 1, Component; 5BNC, D-sub 15pin x 1 (Blue) (common with Analog RGB connector) Digital Input:DVI-D; 1HDMI; 1 (with HDCP 2.2), HDBaseT (RX); RJ45 x 1 (with HDCP 2.2), Output Terminal:D-Sub 15Pin 1 Audio Input:Stereo Mini Jack 3, Audio Output:Stereo Mini Jack 1 Control I/O:RS-232C D-sub 9pin x 1 , Remote Control Input Stereo mini jack x 1, Others:USB Type A 1 (Wireless LAN, Firmware Update, Copy OSD settings) , USB Type B 1 (Firmware Update, Copy OSD settings) Projection Lens:Type:Power Zoom / Power Focus / Power Shift, Focal Length:24.0 – 38.2 mm Make - Epson/Sony/Benq Model No.- EB-G7905U (On Site 2 Year Waranty) (Rates are Sanction from SE nanded Est.No./JESD/OW/ 419 /2022-2023 Providing New Digital Audio Conference System & Video System at District Collctor Office DPDC Hall and Conference Hall Collector Office Jalna Tq.Dist.Jalna.( PART-A & B ) |
| 487 | Supplying, Erecting, Testing and Commissioning of Projector Mount1) 100% Aircraft Aluminum (6061-T6) Construction2) All the necessary hardware included3) Detailed instructions for easy and quick installation4) Sets the projector approximately 8 inches away from the ceiling5) Lateral Shift Coupling allows 1-1/2 inches of left/right lateral adjustmentSpecification-Binding : Electronics, Brand : PCMD, LLC., EAN : 0008440003452, Label : Projector Ceiling Mounts Direct, LLC., Manufacturer : Projector Ceiling Mounts Direct, LLC., Model : INFOCUS-IN81-LAT-8EXT, ProductGroup : CE, ProductTypeName : OFFICE_ELECTRONICSPublisher : Projector Ceiling Mounts Direct, LLC., Studio : Projector Ceiling Mounts Direct, LLCMake - Kristal/Logic (On Site 2 Year Waranty) (Rates are Sanction from SE nanded, Est.No./JESD/OW/ 419 /2022-2023 Providing New Digital Audio Conference System & Video System at District Collctor Office DPDC Hall and Conference Hall Collector Office Jalna Tq.Dist.Jalna.( PART-A & B ) |
| 488 | Supplying & erecting 65\\" professional LED display with 1920 *1080 ( Full HD) Display, suitable for 64 channel NVR and following features, Brightness: minimum 500 Cd/m2, Contrast Ratio: minimum 1000:1, Viewing angle: 178/178 deg., Response time: maximum 8 ms, Inputs: HDMI, VGA, BNC,USB, Audio In,, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete |
| 489 | Supplying, Installing, testing and commissioning of Supercardioid professional Wired Dynamic microphone with noiseless magnetic read switch, frequency Response : 50-18,000Hz, Sensitivity : 2.5mV/Pa, Impedance : 300Ω, with quickdetachable holder with 3-pin professional XLR connector & 10m twin core shielded low noise cable on provided stand complete as per specification no. PA-WDM |
| 490 | Supplying & erecting Microphone table/floor stand with height 350-530 mm, base dia. min 150 mm, min. weight 1.8 kg with superior quality of chrome plating/powder coating (resistant to rust & corrosion) having sturdy mechanism for ensuring trouble free movement and positioning of microphone complete as per specification no. PA-MTS |
| 491 | Supplying, Installing, testing and commissioning of Dual channel UHF wireless microphone & receiver, including 2 handheld dynamic transmitters with operating range of minimum 30 mtr distance in line of sight between transmitter & receiver and with 2 x 1.5V batteries of suitable size and and Current consupmtion <150mA, RF power output 10mW or higher suitable for frequency stability +/-0.005%, frequency response 50-15000Hz, channel frequency display & receiver with 220V-240V AC 50Hz AC Adaptor, distortion - /< 1% S/N ratio 100 dB suitable for same frequency as transmitter having controls like ON/OFF Switch, Volume control for both channels, LED indicators for RF & Audio Signal, channel frequency displays & operates on 12V DC through an AC adaptor complete as per specification no. PA-DPA-UHF (1 In each Auditorioum 1 in Conference) |
| 492 | Supplying Installing, testing and commissioning of PA Gooseneck Microphone with Base and frequency response 50-16000Hz, 150Ω to 200Ω impedence, sensitivity 3 to 5.5mV/PA with minimum length(excluding pedestal) of 585mm(23\\") long, felxible stem gooseneck condenser microphone & Heavy Duty Metal Base having on/off switch, LED indication and Suitable for 48V phantom supply as per specification no. PA-GM (1 In each Auditorioum 1 in Conference) |
| 493 | Supplying, erecting, testing and commissioning Conference Systems Chairman Unit with adjustable gooseneck microphone having minimum length (excluding pedestal) of 18.5' (470 mm) long , 7.5 mV/Pa, current consumption <50mA max, mic auto switch off time 75 seconds, input - line, output - line, headphone, peaker - max input 300 mW, Controls - Priority switch, talk switch, speaker, volume control, headphone volume control and facilities like After pressing the Priority Switch mute all active delegate unit, with accessories such as foam windshield, 2.5m interconnecting cables complete as per specification no. PACSCU |
| 494 | Supplying, erecting, testing and commissioning Conference Systems Delegate Unit with adjustable gooseneck microphone having minimum length (excludingpedestal) of 18.5' (470 mm) 7.5 mV/Pa, current consumption <50mA max, mic auto switch off time 75 seconds, input - line, output - line, headphone, speaker - max input 300 mW, Controls - talk switch, speaker, volume control, headphone volume control, with accessories such as foam windshield, 2.5m interconnecting cables complete as per specification no. PA-CSDU |
| 495 | Supplyig erecting, testing and commissioning Conference Controller Unit controlles up to 50 disscusion units with 50W PA Amplifier with robust metal case, Line o/p - 17.5V DC/3A Max.; -34dBV (20mV), minimum 2 or more inputs, Headphone output, 60-14000 Hz frequency response, S/N ratio >60dB, Speaker output 4Ω, 8Ω/(Low Impedence) and 70V & 100V/(High Impedence) Digital recorder with LED indication bar, can playback the pre-recorded messages, suitable for 230V AC & 24V DC, on provided 19\\" rack. Unit shall have the facility of feeding two independent groups of Delegate Units complete as per specification no. PA-CCU |
| 496 | Supplying, erecting, testing & commissioning Mixer Amplifier 120W RMS Power with Built-in MP3 player with remote control for USB, SD/MMC card reader, with min 5 Mic & 2 Aux Input, bluetooth facility, frequency response 50-15,000Hz ±3dB, Signal to noise ratio between 60dB to 65dB min 5 LED array for output level monitoring. It Shall have Line Output to connect a Booster Amplifier and Preamplifier Output. The Amplifier shall have Speaker Outputs - 4Ω, 8Ω, (Low Impedence) and 70V & 100V/(High Impedence), and can operate on 220-240V Power Supply & DC : 12V (facility to instant transfer to DC power if AC power fails) complete as per specification no. PA-MA |
| 497 | Supplying, erecting, testing & commissioning Mixer Amplifier 250W RMS Power with Built-in Digital Player, MP3 Player with USB/ SD/ MMC Card Reader, Bluetooth with remote and having min 6 Mic & 2 Aux Inputs with Box Speaker/Driver Unit selector switch. Frequency response 50-15,000Hz ±3dB. The unit shall have Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme with Resettable circuit breaker for protection against overload and short circuit. The unit shall have speaker output range of 4Ω, 8Ω/(Low Impedence) and 70V & 100V/(High Impedence) & It can instant transfer to DC power if AC power fails. Signal to noise ratio between 60dB to 65dB complete as per specification no. PA-MA |
| 498 | Supplying, installing, testing and commissioning 15W PA Column Speakers with 15W RMS power in aluminium extruded cabinet, Moulded Plastci Covers & Metal mesh grill, frequency response 150-15,000Hz, operates on 100V line with power taps of 15/10/5/2.5W in black or white color,With Mounting clamps & Necessary hardware, as per decesion by Engineer-in charge complete as per specification no. PA-CS |
| 499 | Supplying, installing, testing and commissioning 30W PA Column Speakers with 30W RMS power in aluminium extruded cabinet, Moulded Plastic Covers & Metal mesh grill, 100V transformer with rotary switch for power tap selection, frequency response 150-10,000Hz, with power taps of 30/20/10/5 W in black or white color as per the decision of Engineer-in charge, complete with mounting clamps & necessary hardware complete as per specification no. PA-CS |
| 500 | Supplying, erecting, testing and commissioning of multistrand annealed bare copper conductor, transparent PVC insulated 2C x 1 sqmm speaker wire in provided trunking/conduit etc.complete as per specification no. PA-TSPWR |
| 501 | Supplying, erecting, testing and commissioning of 2 core 2.5 sqmm copper conductor shielded microphone cable complete as per specification no. PASMC |
| 502 | Supply, installation, commissioning of Low Level Flat screen TROLLEY Designed to mount screens and interactive displays at a low level, the BT8540 features an incremented tilt adjustment up to 90° for the perfect viewing angle, making it ideal for information points in art exhibits and museums or for on stage autocue screens. Braked castors allow the install to be easily repositioned, and height adjustable levelling feet are also included to create a freestanding configuration if required |
| 503 | Supply, installation, testing & commissioning of Display Diagonal Size 75\\" Resolution 3840*2160 (4K UHD) Brightness(Typ.) 500 nit, 24/7 performance, Contrast Ratio (Typ.)- 4000:1 , Viewing Angle(H/V)-178 / 178, Response Time (G to G)-8ms (Typ.), Display Colors-16.7M (True Display) 1.07B (Dithered 10 Bit), Color Gamut-92% (DCI-P3, CIE 1976), Operation Hour-24/7, Anti-Glare Panel-44%, Speaker Type-Built in Speaker (10W + 10W), External Control-RS232C (In/Out) thru Stereo Jack, RJ45, Operating Temperature / Humidity-0℃~ 40℃ / 10~80%,with display mount |
| 504 | Supplying and errecting Small form factor PC for software based conferencing with wireless Keyboard and mouse. 11th Gen Intel® Core i5, Min Windows 10 Pro license included, Intel® Integrated Graphics. 8 GB, 1 x 8 GB, DDR4 with moniter of size 24\\" along with wireless mouse. 1TB 5400 RPM RPM HDD |
| 505 | Supplying and errecting PTZ camera. USB camera and HDMI output. Equipped with a Sony 1/2.8 inch image sensor. USB 3.0 and HDMI video output interface. Full HD 1080p signal output format with a high frame rate of 60 fps.12x optical zoom is applicable for a medium size conference room. Viewing Angle: 72°(H) 80°(D). Wide range Pan/ Tilt/Zoom with mount |
| 506 | Supplying and errecting Video Conferencing system device should support H.323 and SIP for easy connection to any standards-based video solutions (web based laptop or desktop based VC) and H.323 call ALL-in-one HD 1080p Video Conferencing System (upgradeable to1+9 with License )upto Full HD 1080) with PTZ Robotic Camerax1, Omni-directional Microphone x1 & Pre-installed Licensed DataSolution Software for PC Sharing . 720p HD Codec (Upgradeable upto Full HD 1080p) · Bandwidth support of up to 4 Mbps on IP. · H.233, H.234, H.235 ver.3 Encryption Standards for securedcommunication. · Internal AV Recording Facility on USB Media in HD resolution. · Connects to iOS / Android enabled devices. · Video annotating in real time video. · HDMI output to HDTV. · Live Video Data simultaneously using H.239 standard. · Built-in Streaming Capability. · Capability to connect over Wi-Fi. · 12x Optical Zoom & 12x Digital Zoom. · 100 Position Presets. · Multifunction RF Remote Commander Unit. · Web Access & Management. Similar to model no HD-KX-VC166SX Of panasonic Make)) |
| 507 | Supplying and errecting USB transmitter Should extender USB peripherals up to 330 Feet ( 100 Meters point to point on one CATx cable. Supports USB 2.0, 1.1 devices with data transfer rates up to 480 Mbps — Enables bulk, control, interrupt, and isochronous transfers as defined by the USB specification Should be Compatible with CATx twisted pair cable Should have the feature of peripheral emulation to support uninterrupted communication between the host and the USB device along with required USB Cable |
| 508 | Supplying and errecting USB Reciever .Should extende USB peripherals up to 330 Feet ( 100 Meters point to point on one CATx cable. Supports USB 2.0, 1.1 devices with data transfer rates up to 480 Mbps — Enables bulk, control, interrupt, and isochronous transfers as defined by the USB specification Receiver should feature an integrated four port hub Should be Compatible with CATx twisted pair cable along with required USB Cable |
| 509 | Supplying and errecting Premium High Speed Gold plated HDMI Cable 6' HDMI Cable, Up to 4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color depth, max. 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and also to comply the detailed technical specifications as attached. |
| 510 | Supply, Installation, Testing and Commissioning of AV Over IP Encoder. It should support a resolution of 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) with 7.1 channel audio It should have VGA, HDMI & 1GbE LAN + (PoE) output It should support all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio) It should have tool to determine pixel clock frequency & resolution details of the input as well as output video signals. It should support Separate audio and video transmission with Auto select mode: video and audio priority modes. It should support Audio Embedding and De-embedding feature It should be RS-232 & IR Transparent It should have feature such as HDCP 2.2 & 1.4 compliant, Advanced EDID management It should have a latency not more than 1.1 frames (18ms on 60Hz refresh rates). It should have SFP Module support for Optical connection to Network Switches. It can be remote Powered over Ethernet (according to IEEE 802.3af) (PoE PD) It should support HDCP enable/disable function on input It should support Built-in video test pattern generator It should support USB KVM (HID) extension. It should have Return Audio for a Microphone (line level). It should support Unicast and Multicast traffic. It should support IGMP v2 Protocol. It should support Jumbo frames. It should have Built-in website for device configuration |
| 511 | Supply, Installation, Testing and Commissioning of AV Over IP Decoder. It should support a resolution of 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) with 7.1 channel audio It should have 1GbE LAN + (PoE) input & HDMI output It should support all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio) It should have tool to determine pixel clock frequency & resolution details of the input as well as output video signals. It should support Separate audio and video transmission with Auto select mode: video and audio priority modes. It should be Bidirectional RS-232 & IR Transparent. It should support Device control via Ethernet (TCP/IP) It should have feature such as HDCP 2.2 & 1.4 compliant, Advanced EDID management It should have 100 factory EDID pre-sets and five user programable EDIDs. It should have a latency not more than 1.1 frames (18ms on 60Hz refresh rates). It should have SFP Module support for Optical connection to Network Switches. It can be remote Powered over Ethernet (according to IEEE 802.3af) (PoE PD) It should support Built-in video test pattern generator It should support USB KVM (HID) extension It should have Return Audio for a Microphone (line level) It should have Inbuilt Video Wall configurator. It should support adjustable Gap & Bezel Compensation on Video Wall It should support Unicast and Multicast traffic It should support IGMP v2 Protocol It should support Jumbo frames. It should have Built-in website for device configuration. |
| 512 | Supplying and errecting Wireless Presentation with 1 Button. Full BYOD support. Share from laptop, tablet or smartphone. Connect using conventional Wi–Fi and/or LAN. Supports Windows™ and Mac™ laptops, Chromebooks™, iOS™ and Android™ mobile operating systems. High–quality 4K@30Hz video streaming Two participants can present simultaneously. |
| 513 | Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP(9-1-4) |
| 514 | Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender