Tender For Construction School Building For Middle School Wagay Mohalla Shalgam[Adv. Cost ₹ 62.67 Lacs (₹ 53.11 Lacs Exclusive Of Gst + Gst@18% ₹ 9.56 Lacs)]
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Sep 2026
5 days left
EMD
1.25 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction School Building For Middle School Wagay Mohalla Shalgam[Adv. Cost ₹ 62.67 Lacs (₹ 53.11 Lacs Exclusive Of Gst + Gst@18% ₹ 9.56 Lacs)]
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:2.9.1 All kinds of soil. |
| 2 | P/L of stone soling nallah boulders, hand packed, incl. carriage |
| 3 | Cast in situ Conc. with nominal mix M-7.50 grade with 40mm nominal size agg..incl all leads lifts, carriage complete. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 5 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 5.2.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Cast in situ Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 7 | Centring and shuttering including strutting, propping etc and removal of form work |
| 8 | Foundations, footings, bases of columns etc. for mass concrete. |
| 9 | Walls any thickness including attached buttresses, plinth and string courses etc. |
| 10 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 11 | Columns, pillars, piers, abutments, posts and struts. |
| 12 | Suspended floors, roofs, landings, balconies and access platforms. |
| 13 | Edges of slabs and breaks in floors and walls |
| 14 | P/L and placing high strength doformed steel including cost of binding wire Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 15 | Brick with FPS bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) upto floor level five |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): IMPORTED WOOD |
| 17 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, Including panelling using both sides prelaminated kitply , all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).32mm thick imported wood. |
| 18 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, including 3.5mm thick glass panes in openings, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).30mm thick imported wood. |
| 19 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge: imported wood 30mm. |
| 20 | 15mm cement plaster on rough side of single or half brick wall in1:6(1 cement : 6 fine sand mortar) |
| 21 | 12 mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand) |
| 22 | Providing and applying white cement based wall putty of avg.2mm of approved brand and manifuture |
| 23 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 24 | Applying priming coat:13.58.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 25 | Applying priming coat:With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood / steel works. |
| 27 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigmentsetc. complete, Size of tile 600x600 mm. |
| 28 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Including 1mm thick MS Sheets for sofits and eves boarding. |
| 29 | Providing colour coated High Rib roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead,excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (0.50mm thick) including hips ridges valleys all complete |
| 30 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 31 | Providing and fixing of 50 mm dia stainless steel railing of 304 grade of hallow tube 1.6mm thicl jindal/salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape buffing etc.complete and fixing stainless steel balusters upto 900 mm height newel post 1050 not less than 1050 mm ss tubes 3 in one installed horizontally includind cuttng welding grinding to required shape and size by required steel dash fasterners nuts bolts screws etc.. |
| 32 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge, Polished Granite stone slab jet Black, Cherry Red, EliteBrown, Cat Eye or equivalent. |
| 33 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work |
| 34 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. 9.48.2 Fixed to openings / wooden frames with rawl plugs screws etc. |
| 35 | Providing and fixing of bright finished brass hardware fittings |
| 36 | 125 mm Handle |
| 37 | 200 mm Handle |
| 38 | 100x10mm Tower bolt |
| 39 | 250x10mm Tower bolts |
| 40 | Stay hooks |
| 41 | L-Dop 18\\" with inbuilt Locking sustem |
| 42 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 17301, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 43 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 44 | PN-16 pipe , 25mm OD (SDR-7.4) |
| 45 | Providing and fixing ball valve (PPR 25mm nominal bore) |
| 46 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 47 | Water storage tank PVC tripple layer of approved brand with all necessary fittings |
| 48 | Stain less steel heavy duty angle valve |
| 49 | PVC connections |
| 50 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. |
| 51 | Providing, laying and fixing in position PVC pipes including PVC fittings in trenches in required gradient, inclding cost of all fixing accessories, trenching etc complete job as directed by EIC |
| 52 | 75mm dia |
| 53 | 100 mm dia |
| 54 | P/F of PVC floor trap with Jali |
| 55 | Providing and fixing Wall mixer of approved make |
| 56 | Construction of brick masonry manhole chamber 1'-6\\" x 1'-6\\" x 1' deep i/c plaster / polishing with CI manhole cover with frame complete. |
| 57 | Dry rubble masonry with hard stone in foundation & plinth using quarry stone with bond stones including all carriages |
| 58 | Providing & fixing wash basin with C.I/ M.S brackets 15mm C.P piller taps(Long size) 32mm C.P brass waste of standard pattern incld painting of fittings making good walls White viterous china flat back 630x450mm with a pair of 15mm C.P brass piller taps with stand |
| 59 | Providing and fixing 5mm thick beveled edge mirror of superior glass (of approved quality) complete fixed to wooden cleats with C.P. brass serews and washers complete. |
| 60 | Providing and fixing toilet paper holder C.P. brass |
| 61 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender