Tender For Addition /Alteration Of A Meeting Support Room Including Pantry, Gents & Ladies Washroom And Ups Area At Deal And Renovation Of (Indoor & Outdoor) Trial Room Of Mmg Bldg, Technical Area A At Irde Under Ge (I) R&D Dehradun
Tender Value
23.21 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
17 days left
EMD
46500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition /Alteration Of A Meeting Support Room Including Pantry, Gents & Ladies Washroom And Ups Area At Deal And Renovation Of (Indoor & Outdoor) Trial Room Of Mmg Bldg, Technical Area A At Irde Under Ge (I) R&D Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work built in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed by Engineer-in-charge. |
| 2 | Providing and laying1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) derived from natural sources complete all as specified and directed by Engineer-in-charge. |
| 3 | M&L TMT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level complete all as specified and directed by Engineer-in-charge. |
| 4 | Providing and laying Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed by Engineer-in-charge. |
| 5 | M&L for fly ash brick work withOld size bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-charge. |
| 6 | Dismantling old plaster any type, dado or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed by Engineer-in-charge. |
| 7 | M&L for 12 mm cement plaster of mix 1:6 (1 Cement : 6 Fine Sand) etc complete all as specified and directed. |
| 8 | M&L for 6mm cement plaster in CM 1:3 on ceiling surface/concrete surfaces all as specified. |
| 9 | M&L for applying two or more coats of luster paint over a coat of primer on new wall/ceiling surfaces, using 1st quality acrylic luster paint (ready mixed), low VOC content not exceeding 50 gms/litre, washable, stain-resistant, non-fading, smooth finish, of approved shade and colour, complete all as per manufacturer’s specifications and as directed.(Make : Asian Paints Royale Lustre Luxury Emulsion or equivalent) |
| 10 | M&L for complete removal of existing treatment from old wall/ceiling surfaces, preparation of surfaces including scraping, cleaning, applying 3mm thick cement-based wall putty, a coat of primer, and two or more coats of 1st quality acrylic luster paint (ready mixed), VOC content not exceeding 50 gms/litre, washable, stain-resistant, non-fading, smooth finish, of approved shade and colour, complete all as per manufacturer’s specifications and as directed. |
| 11 | M&L 3mm thick wall care putty on wall surface complete all as specified and directed by Engineer-in-charge. |
| 12 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead of area 3 Sqm and below complete all as specified and directed by Engineer-in-charge. |
| 13 | Providing and fixing 100X58X1.90 mm IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete all as specified and directed by Engineer-in-charge. |
| 14 | S&F Mortice lock(brass), vertical type, size 100 mm 4 Levers complete all as specified and directed. |
| 15 | S&F 200mm long Brass barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 16 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.Two track four panels sliding windows with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on three panels along with multi-point locking system, nylon rollers with SS 304 body.Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (55 mm & above) (Height above 1.8m). |
| 17 | Providing and fixing 4mm thick glazing with float glass panes (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete all as specified and directed by Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) |
| 18 | Providing and fixing Fly proof stainless steel grade 304 wire gauge with 0.5 mmdia. wire and 1.4 mm wide aperture with matching wood beading complete all as specified and directed by Engineer-in-charge. |
| 19 | S&F polyester coloured venetian blind mounted on doors/windows with aluminium hanging channel with vertical/horizontal on roller sliding wheel rope including all necessary fittings and fixture complete all as specified and directed. |
| 20 | S&F heavy duty SS magnetic door stopper, floor/wall mounted type, manufactured from SS-304 grade stainless steel, with strong magnetic holding arrangement, concealed fixing arrangement, including screws, fasteners and fixing accessories complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed 1:4 CM complete all as specified and directed by the Engineer-in-Charge. |
| 22 | M&L for glazed vitrified digital coloured tiles of approved pattern on vertical surfaces, size 600 x 1200 x 8–9 mm thick, fixed with Roff Vitro Adhesive by Pidilite or equivalent, and jointed/pointed in white or coloured cement grout to match the shade of tiles, including 10 mm thick cement plaster in CM (1:4) as backing coat, complete all as specified and directed by the Engineer-in-Charge. |
| 23 | M&L Glazed Vitrified tiles light shade 8-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed 1:4 CM complete all as specified and directed. |
| 24 | S&F 16mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed. |
| 25 | Providing and laying Polished Granite stone slab colour of Black, cherry/rubby Red or equivelent flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 26 | Providing and fixing Steel work in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required complete all as specified and directed. |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 20mm dia nominal bore having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & brass threaded fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed by Engineer-in-Charge. Note- Concealed work, including cutting chases and making good the walls etc. |
| 28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 25mm dia nominal bore having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing ofjoints complete all as specified and directed by Engineer-in-Charge. |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 50mm dia nominal bore, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete all as specified and directed by Engineer-in-Charge. |
| 30 | M&L 12mm thick toughened moduler glass partitaion as in railing, staircase including seamless frosted glass fixing at powder coated aluminium/SS-304 corner frame/bracket work for glass, seal by silicon sealent all as specified and directed.(Cost of aluminium Section/frame/etc is included) |
| 31 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board 510x1040mm bowl depth 250mm as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm of approved quality and colour complete all as specified and directed. |
| 33 | S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 34 | S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 35 | PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls including all fittings complete all as specified and directed. |
| 36 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 37 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed by Engineer-in-Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 38 | Providing and fixing 100mm stainless steel (SS-304 grade) friction hinges to the PVC/Wooden windows & door of approved quality, with necessary stainless steel screws etc. complete all as specified and directed by Engineer-in-Charge. |
| 39 | M&L for PCC 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed by Engineer-in-Charge. |
| 40 | M&L Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles. Using R1 series with frame (33 mm & above ) x (35 mm & above) & sash /mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre) complete all as specified and directed by Engineer-in-Charge. |
| 41 | Demolishing cement concrete etc. of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 42 | S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all asspecified in SSR Part-1 complete all as specified and directed by Engineer-in-Charge. |
| 43 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 44 | S&F insulated PVC/WPC Designer False Ceiling comprising PVC/WPC laminated panels 8–10 mm thick, fire-retardant, ISI marked, having density not less than 1.4 gm/cm³, in approved shade, colour, design and pattern with glossy/matte finish, fixed to GI framework consisting of GI perimeter channels, ceiling sections, intermediate channels, hangers and connecting clips of approved make and size, duly suspended from roof/slab, fixed with screws, nuts, bolts and dash fasteners complete. The work shall include making necessary cut-outs/openings for light fittings, ceiling fans, AC grills/diffusers and other fixtures, with all joints truly aligned, edges neatly finished, surface properly cleaned and completed in all respects, complete all as specified and directed by Engr-in-Charge. |
| 45 | M&L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 46 | S&F decorative laminate of approved make, colour, shade and pattern, thickness 0.90 mm (as specified), fixed with approved adhesive including edge banding / lipping of matching PVC / edge strips, provision of grooves / design patterns as approved by Engineer-in-Charge, all edges and corners finished neatly and complete all as specified and directed. |
| 47 | Supply and fix 18mm thick marine plywood (BWP) as per IS 710, as approved by Engineer-in-Charge, all edges and corners finished neatly and complete all specified and as directed. |
| 48 | Supply and fix telescopic channels, soft closing, powder coated with ball bearings, suitable for sliding SS plate racks 60 cm long, standard width, fixed over and including 2nd class hard wood rectangular fillet sectional area exc. 3 sq.cm & n.exc. 6 sq.cm, clean swan secured with screws and the fillet fixed on cudappah stone with screws, all as specified and as directed. |
| 49 | Supply and fix stainless steel handle oval shape fabricated type anodized 200 mm long of approved design, shape and make with ISI mark embosed on it, complete all as specified and as directed. |
| 50 | Supply and fix designer stainless steel finish soft closing hinges of approved design, shape and make with ISI mark embosed on it washers complete all as specified and as directed. |
| 51 | S&F White Vitreous China Wash Down Water Closet (WC) Pan, wall-mounted, size 52×36×35 cm, with mild steel Chromium-Plated or aluminised hinging device including soft-closing seat cover, connection to down pipe and flushing pipe complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F Pneumatic Concealed Cistern Full Frame & Drain Set with Flush Plate, with all necessary fittings, connections, and accessories, complete all as specified and directed by Engr-in-Charge.Cat Part No Somany -17118008007101,17118020039101 or Equivalent as approved by the GE. |
| 53 | S&F Health Faucet (ABS body) with mild steel Chromium-Plated finish, suitable for 15 mm dia pipe, including 1.50 m long flexible tube and ABS wall hook, making all necessary connections and fixing in position, complete in all respects as specified, complete all as specified and directed by Engr-in-Charge.Cat Part No Somany -272150680301 or Equivalent as approved by the GE. |
| 54 | S&F CP Towel Ring of approved size and design as per enginner in charge complete all as specified and directed. Cat Part No Somany -272151450071 or Equivalent as approved by the GE. |
| 55 | S&F CP liquid dispenser of approved size and design as per enginner in charge complete all as specified and directed Cat Part No Somany -272151560141 or Equivalent as approved by the GE. |
| 56 | S&F CP Square Drain Jali of approved size and design as per enginner in charge complete all as specified and directed Cat Part No Somany -272150050781or Equivalent as approved by the GE. |
| 57 | S&F CP 15mm bore Angular Stop Cock with Wall Flange of approved size and design as per enginner in charge complete all as specified and directed Cat Part No Somany -272150050401or Equivalent as approved by the GE. |
| 58 | S&F CP 15mm bore Bib Cock with Wall Flange of approved size and design as per enginner in charge complete all as specified and directed Cat Part No Somany -272210330021or Equivalent as approved by the GE. |
| 59 | S&F 5mm thick LED glass mirror with dual lighting functions and a touch/motion sensor offers shadow-free illumination for grooming, makeup, and modern interior decor complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F CP Concealed Stop Cock, Heavy Duty, 15 mm, including Exposed Part Kit for Concealed Stop Cock, including all necessary fittings, connections, and accessories, complete all as specified and directed by Engr-in-Charge. |
| 61 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cuttingand making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern |
| 62 | S&F Vitreous China Counter Top Wash Hand Basin (WHB), Hindware Cat. No.: 91094, Snow White, fancy type, overall size 490×400×150 mm, including 32 mm CP, Pop-Up Waste Coupling (Full Cap ceramic) CP Bottle Trap (32 mm) with 225 mm & 175 mm long wall connection pipes, wall flange (Premium), 300 mm long PVC connection pipe, and all necessary fittings and accessories complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F 15mm Bore single lever high basin mixture, chromium plated, screwed down high pressure, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.Cat Part No Somany -272111420021 or Equivalent as approved by the GE. |
| 64 | S&F 15mm Bore sink mixture wall mounted, chromium plated, screwed down high pressure, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.Cat Part No Somany -272201570041 or Equivalent as approved by the GE. |
| 65 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sqm complete all as specified and as directed. |
| 66 | S&F Insulated PVC/WPC Designer Wall Panelling comprising PVC/WPC laminated panels 8–10 mm thick, fire-retardant, ISI marked, having density not less than 1.4 gm/cm³, in approved shade, colour, design and pattern with glossy/matte finish, fixed in interlocked arrangement using tongue-and-groove / click-lock joint system to ensure proper alignment and seamless finish, fixed to GI/MS framework/battens consisting of vertical and horizontal members of approved make and size, securely fixed to wall surface with screws, rawl plugs, dash fasteners, nuts, bolts and necessary accessories complete all as specified and as directed.Note:The work shall include providing and fixing all corner profiles, edge trims, junction strips, grooves, beads and end caps wherever required, making necessary cut-outs/openings for electrical switches, sockets, conduits, AC pipes, service openings and other fixtures, with all joints truly aligned, edges neatly finished, surface properly cleaned and completed in all respects. |
| 67 | Dismantling tile work of any thickness upto 25mm in floors and roofs laid in cement mortar including stacking material within 50 metres lead complete all as specified and as directed. |
| 68 | Supply and fixing acrylic cabin/room name plate fabricated from 8 mm thick acrylic sheet, incorporating double-sided lettering in Hindi or English. The plate shall be complete with all necessary fixtures, fasteners, and mounting arrangements, of size as required by the user and as directed by the Engineer-in-Charge. Note: The work shall be executed complete in all respects as specified and directed. |
| 69 | Providing and fixing Brick work with common burnt clay FPS (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1 : 6 (1 cement : 6 coarse sand) complete all as specified and directed. |
| 70 | Two or more coat of Distempering including primer in new wall and ceiling surface with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specifications complete all as specified and as directed. |
| 71 | Material and labour 15 mm cement plaster on brick wall of mix 1 : 4 (1 cement : 4 fine sand) at height of 10m or more from GL with water proofing compound complete all as specified and directed.Note : WPC shall be measured and paid separately. |
| 72 | Extra for providing and mixing water proofing material in cement plaster work in proportion min 3% by weight of cement or as recommended by the manufacturers complete all as specified and as directed. |
| 73 | M&L for Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 74 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete all as specified and as directed. |
| 75 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.67 ltr/ 10 sqm) over existing cement paint surface after complete removing old coat of paint with sander, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour and applying cement based putty average thickness 1mm of approved brand complete all as specified and as directed. |
| 76 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, of area below 3 sqm architrave, holdfasts etc. and making good jambs, cills and soffits complete and stacking within 50 metres lead complete all as specified and directed. |
| 77 | Providing and fixing Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, complete all as specified and as directed by Engineer-in-Charge. Note: Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. |
| 78 | Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m) |
| 79 | Providing and fixing float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). |
| 80 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including b62x19 mm beading of second class teak wood and priming coat with approved steel primer complete all as specified and as directed. |
| 81 | S&F coloured 1 mm thick zebra venetian blind ,roller venetian ,vertical venetian with opening and closing arrangement including aluminium hanging channel at top with sliding wheel/ring including pulling rope in both side and necessary accessories complete all as specified and directed. |
| 82 | M&L for uPVC Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) (Height upto 2.5 metre) complete all as specified and as directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 83 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified and as directed. |
| 84 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick(galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles complete all as specified and as directed. |
| 85 | Providing and laying Matt/antiskid 600x1200mm Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours\ and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete all as specified and as directed. |
| 86 | Description all as per item Srl No. 84.00 here in before but in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and as directed. |
| 87 | Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with colour epoxy tile grout of M/s Pidlite, ROFF RTM or equivalent , including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and as directed. |
| 88 | M&L Steel work in built up tubular Hot finished seamless type tubes (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and including welding and bolted with special shaped washers etc. complete all as specified and as directed. |
| 89 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new steel work including one coat of rex oxide primer including preparing surface complete all as specified and as directed. |
| 90 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and factory moulded shape wherever required complete all as specified and as directed. |
| 91 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete as in Ridges plain (500 - 600mm) complete all as specified and as directed. |
| 92 | Providing and fixing 25 mm thick pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc complete all as specified and as directed.Note :- Colour shall be approved by GE/Engr-in-Charge. |
| 93 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm complete all as specified and as directed. |
| 94 | Providing and fixing M.S. Piano hinges overall width 35mm ISI marked IS: 3818 (overall width 35 mm) finished with nickel chromium plating grade I as per IS: 1068 and fixing with necessary screws etc complete all as specified and directed. |
| 95 | Providing and fixing Double strip (horizontal type) magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete all as specified and as directed. |
| 96 | M&L for 12 mm thick cement plaster finished with a floating coat of neat cement slury mix 1:3 complete all as specified and as directed. |
| 97 | Providing and fixing in 18mm wall lining medium density fibre board IS: 14587:1998 marked, Pre- aminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws and all fittings etc. complete all as specified and as directed. |
| 98 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm complete all as specified and as directed. |
| 99 | Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane complete all as specified and as directed. |
| 100 | Taking down of carefully unserviceable Aluminium/copper point wiring (light, fan socket or power) complete with fitting such as switches, ceiling rose lamp holder, sockets, fan regulators, SK/FTL light fittings etc removing materials for store for keeping in safe custody or for taking credit (credit for above items should be taken as per conditions separately) and making good disturbed surfaces of walls, floors etc as specified and directed. |
| 101 | M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch. |
| 102 | Description all as per item srl No. 100.00 here in before but for point wiring for 5 pin switch socket outlet, 5/6 Amps on same board with other switches complete all as specified and directed. |
| 103 | Description all as per item srl No. 100.00 here in before but for point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board.omplete all as specified and directed. |
| 104 | Description all as per item srl No. 100.00 here in before but for one power point 3 pin 15 Amps socket outlet PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete. Please Enable Macros to View BoQ information |
| 105 | Description all as per item srl No. 100.00 here in before but for one power point 3 pin 15 Amps socket outlet PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender