Short Dated Tender - Tender For Stores As Per Appendix ‘A’

Sharing tender

Short Dated Tender - Stores As Per Appendix ‘A’ 1 Liquid Limit Cone Penetrometer, Automatic Specification:- Standard Is 2720 (Part 5): 1985 (Reaffirmed 2020) Cone: Stainless Steel Cone, Apex Angle 30° ± 30, Total Aliding Weight 148G (Cone Assembly). Release Timer: Digital Timer Set To 5 Seconds. Penetration Measurement: Digital Or Analog Depth Gauge With 0.1 Mm Least Count Accessories Sample Containers, Penetration Measuring Scale, Calibration Tools. Usage: For Determining Liquid Limit Of Soil Using Cone Penetration Method. Nos 1 Nos 1 Capacity: Minimum 50 Kn (5 Tonne). Platen Speed: Fixed At 1.25 Mm/Min 2. 3. Laboratory Cbr Machine Digital Specification:-Standard: Is 2720 (Part 16): 1987 Load Measurement: Digital Proving Ring Or Load Cell. Displacement Measurement: Dial Gauge Or Digital With 0.01 Mm Least Count Accessories: Cbr Moulds. Surcharge Weights, Spacer Diso, Penetration Piston. Usage: For Determining California Bearing Ratio Of Soil Subgrade. Core Drilling Machine (Cut Cores Larger Than 150Mm) It Is A Compact Drilling Machine That Can Drill Through Hard Rock, Concrete, Bitumen, Tiles.And Marbles. Adequate Fixtures Are Provided To Drill Cores Of 100 From 150 Mm Diameter Gyratory Samples And Multiple Cores From Slab Of 410X 260X (Max) 100Mm Height. The Unit Have A Nigid, Stable And Vibration Free Platform. The Unit Pbiave Arrangement For Both Lateral And Longitudinal Movement Of The Main Sample Hotdhng Jig To Facilitate Coring From Bigger Diameter Cores And Multi Cores From Slabs. The Sample Is Moveable In X Y Direction And The Main Frame Is Stationary And Have Z Mpyement, Due To The Flexibility In Multi Direction Multiple Cores Of Different Sizes Can/He Cored From Slab Of The Size Given Above. Salient Features 1. Idle For Drilling Testxpres In Jaboratory Environment From Larger 150 Mm Diameter Gyratory Cores. Hdeal For Drilling Extracting 3 Nos X 100 Mm Diameter Cores For Slabs Ideal For Extracting Multiple Cores Of Different Sizes From Slabs 2. A Stainiess Steel Container With Water Arrangement Is Provided With Clamping Fixture For 150 Mm Diameter Core And 410X 260X 100Mm (Max). 3. Clamping Is Rigid And Positive. 4. Facility For Taking Out 3 Cores Of 100 Mm Diameter From The Above Mentioned Size Slab Rigid Floor Fixing. 5. Water Swivel For Circulation And Cooling Of The Tip. 6. Core Depth Up To 450Mm. 7. Nos 1 4 5 8. Travel On The Pilar About 600 Mm. 9. Bits Core Diameter 100Mm 5 No. 10. Core Diameter 150Mm 2 No. Power Of The Motor: 2200 Watts Multiple Speeds: (3 Speeds): 450,1200,2500 Rpm Power Supply: 230 Volts, 50 Hz Ac. 11. Barrels For 100 Mm Bit 1 No For 150 Mm Bit 1 No. (Heico Or Equivalent) Digital Rebound Hammer Nos 1 Specification:-Standard: Is 13311 (Part 2): 1992 Impact Energy: 2.207 Nm. Measurement Range: 10 To 70 N/Mm². Display: Digital With Memory Storage And Usb/Bluetooth Data Transfer. Calibration: With Standard Anvil As Per Is. Usage: For Non-Destructive Testing Of Concrete Compressive Strength. Density Basket Specification:-Standard: Is 2386 (Part 3): 1963 Material: Non-Corrodible Wire Mesh (Stainless Steel). Size: Approx. 20 Cm Diameter X 20 Cm Height. Mesh Size: 6.3Mm. Accessories: Wire Handle And Water Bath Frame Usage: For Specific Gravity And Water Absorption Test Of Aggregates Nos 1 6 7. Ring And Bal Apparatus, Electrically Operated Nos 1 Specification:- Standard Is 1205. 1978 Heating System: Electric With Digital Temperature Control. Temperature Range: Ambient To 200°C.Accessories: Bras5 Rings, Steel Balls, Thermometer (Astm 15°C To 300°C), Beaker, Stirrer. Usage: For Softening Point Determination Of Bituminous Materials. Muffle Furnace Nos 1 Specification:-Standard: Is 4031 (Part 8): 1988 Temperature Range: Up To 1000°C Chamber Size: Minimum 6 X 6 X 12 Controller: Digital Pid With Programmable Timer. Heating Element: Kanthal A1 Wire Or Equivalent Safety: Thermocouple With Auto Cut-Off Usage: For Loss On Ignition, Gravimetric And Ash Content Testsstores To Be Supplied To 504 Ss&Tc (Gref), Phuentsholing (Bhutan) 8. Benzene Lirs 7 Specification:-Is 2848:1986 (Reaffirmed 2020) Digital Thermometer For Bitumen Temperature, With Isi Certification Mark Nos 5 Specification:- Minimum (50 Degree Celcious) To Accommodate The Range Of Bitumen Temperatures. Maximum: 200 Degree Celcious Or Higher, Depending On Specific Needs For Bitumen Production Process Material: Stainless Steel Is The Preferred Material For The Probe Due To Its Durability And Resistance To Corrosion In Bitumen 10. Extractor Filter Rings For Bitumen Extraction Nos 1 Specifications: Filter Paper For Extractor Test 24Cm Dia Pkt Of 100 Circles 11. Marshal Stability & Flow Value Machine Nos 1 Specification: Load Capacity: 50 Kn (50.000N) Or 5000 Kgf Load Measurement: Strain Gauge Load Cell With A Specified Accuracy Flow Measurement Dial Gauage Or Displacement Transducer With A Resolution Of 0.01Mm Or 0.25Mm Increments Maximum Flow: Typically Measured Up To 25Mm Maximum Flow: Typically Measured Up To 25Mm Platen Spoed: 50.8Mm/Min (2 Inches/Min) Vertical Travel: 70Mm Maximum 12 Digital Thermometer Gun Nos 6 Specification: Wide Range Measurement 13. (-50 Degree Celcious) To (+ 600 Dgree Celcious) Heavy Duty Plastic Duarble Abs Material With A Uv Coating Provided Resistance To Soratches, Extreme Temperature And Acidently Drop Dynamic Instant Reading Press Trigger For Live, Dynamic Reading Non Contact Digital Handhled Temperature Gun With Back Light Lcd Disly Industrial Thermometer For Industrial Core Cutting Machine: Specification 10 Cm Dia Diamond Cutting Edge Dimensions 35 Feet X 3 Feet Height 4.5 Feet Model Type -Petrol Engine, Weight 200 Kg Engine Capacity 5.5 Hp Nos 14 Non-Nuclear Asphalt Density Gauge. Iwin Or Equivalent 15 Lightweight Deflectometer Weight:-15Kgs Drop Weight:-10Kgs Maximum Impact Force: 7.07Kn Diameter-300Mm Thickness:-20M 6. Total Station With Complete Accessories Nos 1 Make: & Type:- Sokkia Im-55 Model Or Equivalent Telescope Magnificatior/Resolving Power: 30X/2.5 Others: Length: 171 Mm. Objective Aperture: 45 Mm (48 Mm For Edm), Image: Erect, Field Of View: 1030 Minimum Fodus: 1.3 M, Reticle Illumination: 5 Brightness Levels Angle Measurement Minimum Display (Selectable) 1/5 Accuracy (Iso 17123-3-2001): 2 Collimation Compensation On/Off Selectable Distance Measurement Laser Output: Refiectorfess Mode: Class 3R/Prism/ Sheet Mode: Class1 Measuring Range (Under Average Conditions) Reflectorless: 0.3 To 500 M Measuring Range (Under Average Conditions) Reflective Sheet Rs9On-K: 1.3 To 500 Mm Rs50N-K: 13 To 300 Mm Rs10N-K-1 3 To 100 M Supplied Complete With One Big Prism Set, One Mini Prism, One Heavy Duty Fibre Tripod Double Lock. 17. Mild Steel Digital Schmidt Rebound Hammer Proceq St Type N Nos 1 (A) Language Independent User Interface (B) Data Aoquisition & Processing (C) Impact Energy: 2.207 Nm (1.63 Bft) (D) Concrete Compressive Strength Range: 10-100 N/Mm2 (1450-14500 Psi) (E) Weight: 570 G (1.3 B) (F) Display: 17 X 71 Pixel (G) Graphic (H) Battery Life: 5000 Impacts Between Charges (I)Charger Connection: Endnpagusb100 Type Ma) B (5V () Operating Temperature: 0 To 50_C (32 To 122 F) (K) Storage Temperature-10 To 70_C (14 To 158_F) (1) Conforms To Astm C-805 (Mbs-1881-202 (N) Is 13311 18 Gsieves 300 Mm Dia. Sizes 100Mm, 80Mm, 63Mm,40Mm, 25Mm, 20Mm. 125Mm, 4.75Mm, 6.3Mm With Lid & Pan Set 1 Sieves 200 Mm Dia, Spun Brass Frame Size 4.75 Mm, 2.36 Mm, 1.18 Mm, 600 Mic. 300 Mic, 150 Mic, 75 Mic, Lid And Pan Set 1 Nos 1 19 20 21 Slump Test Apparatus Is:7320-1974 Used For Determination Of Slump Of Fresh Concrete Mix As A Measure Of Its Consistency Where The Nominal Size Of Aggregate Does Not Exceed 38 Mm. It Comprises The Following- (1) A Slump Cone 100 Mm Dia At The Top, 200 Mm Dia At The Bottom, And 300 Mm High With Two Cleats And Lifting Handles (Ii) A Base Plate With Clamping Arrangement For The Slump Cone And A Swivel Handle Which Also Serves As The Datum For Measuring The Slump. ) A Tamping Rod 1.6 Cm Dia And 60 Cm Long With One End Rounded And Graduated From 0 To 15 Cm In 0.5 Cm Spacing To Measure The Slump. (Heico Or Equivalent) Cube Mould (150 Mm) Wth I.S.I Mark As Per Is:10086-1982 Cube Mould Made Of Cast Iron Having An Intemal Size Of 150Mm With A Tolerance Of ±0.2 And Planeness Of ±0.03 Mm. Cube Moulds Are Isi Marked. Weight Of The Cube Mould Approx 13-14 Kg. A 150 Mm Concrete Cube Mould Is Essential For Preparing Standardized Specimens To Assess The Compressive Strength Of Concrete. In India The Specifications For Such Moulds Are Outlined In Is 10086:1982, Titled Specification For Moulds For Use In Tests Of Cement And Concrete. Below Are The Key Specifications And Requirements For A 150 Mm Cube Mould As Per This Standard: Dimensions And Tolerances: Intermal Dimensions: The Distance Between Opposite Faces Is 150 Mm With A Permissible Tolerance Of ±0.2 Mm. Height: The MouldS Height Is 150 Mm ±0.2 Mm. Base Plate Dimensions: Length: 280 Mm Width: 215 Mm Thickness: B Mm Material: Cube Moulds Are Typically Constructed From Materials Such As Cast Iron To Ensure Durability And Dimensional Stability. The Side And Base Plates Are Often Made Of Cast Iron, Providing The Necessary Strength And Rigidity Nos 54 Contd....11/- Ser No 11 List Of Stores Annoxure-Il To Appendix A Hq Ce (P) Dantak Eng No 30003/Dtk/19Tf/Enq-24/E3Es Dt 10 Sep 2026 Nomenclature Stores To Be Supplied To Dett A 504 Ss&Tc (Gref), Samdrup Jongkhar (Bhutan) 22 23 24 25 26 27 28 Compression Testing Machine With Digital Readout Unit (4 Key)- 1000Kn Load Frame Load Frame Is A Steel Welded Structure. It Is Designed To Withstand A Few Million Times Of Full Cycles Of Loading Without Any Sign Of Distortion Or Fatigue. These Frames Are Light In Weight. The Base Carries A Fine Finished Hydraulic Ram And The Lower Platen. The Top Plate Has The Spherical Seating To Take Care Of Any Irregularity Of The Specimen Surface Or Slight Misplacement Of The Specimen From The Central Position. As A Safety Precaution Front Cover Is Provided, Asa Protection To The Operator While At The Same Time Giving An Unobstructive View Of The Specimen Under Test. Pumping Unit Pumping Unit Is Attached On The Right Hand Side Of The Loading Unit. It Is A Multi Plunger Pump With Booster Arrangement This Facility Is For Fast Raising Of Ram Without Load. Pump Is Submerged In The Tank And Is Powered By 1.5 Kw Electric Motor. Operating On 220 Volts 50Hz Ac Supply (Other Voltages Optional). Power Pack Gives Nonpulsating Flow To The Hydraulic Ram. This Ensures Smooth Loading Of The Specimen Which Can Be Seen By The Movement Of The Load Gauge/Digital Display. The Flow Of The Oil Can Be Precisely Controlled By The Strain Control Knob Located Ata Convenient Height. With The Proper Check On The Oil, The Life Of The Pumping Unit And The Hydraulic Ram Is Almost As Long As, Life Of Machine. Keeping In View The Operators Safety Regulations, Safety Features Like Expanded Sheet Metal Door, Overload Relief Valve Is Provided As Standard In The Hydraulic Circuit. Indication Of Load Is On Digital Display System, Which Is Directly Indicated, In Respective Engineering Unit. The Electronic Display Unit Is Totally Microprocessor Based With A Buit In Rs232 Serial Port. It Has Indication For Load Peak Load, And Pace Rate Indicator. Pace Rate Is Achieved Manually By Controlling The Flow Control Knob And The System Is Released Manually After The Peak Load Is Achieved. Readings Can Be Transferred Through The Serial Port To The Computer At An Interval Of 1 Sec Till Specimen Failure. Capacity: 1000Kn Max. Ram Travel: 50Mm Day Light Clearance: 340Mm Horizontal Clearance: 300Mm Platen Size Diameter 256Mm. (Heico Or Equivalent) Aggregate Impact Test Apparatus With Counter Reguired For Determining The Impact Value Of Coarse Aggregate. It Consists Of The Folowing )Fitted With An Auto-Matic Blow Counter. ) A Heavy Circular Base With Two Vertical Guides Fitted With A Cross Bar At The Top. Iii) A Hammer Of 13.75 Kg Mass Which Can Be Raised And Allowed To Fall Freely Through 380 +5 Mm With Locking Arrangement. Iv) A Cylindrical Cup, A Metal Measure And A Tamping Rod 10 Mm Dia X 230 Mm Long. (Heico Or Equivalent) Centrifuge Extractor (Motorised) For Determining The Quantity Of Bitumen In Hot Mixed Paving Mixtures And Pavement Samples. It Isa Portable Unit For Use In Field And Laboratory. It Consists Of A Constant Aluminium Bowl. The Bowl Is Coupled Directly To A Motor Through Flexible Coupling. A Variac Is Provided, Which Is Preset To Give 3500 R.P.M. To The Bowl. The Unit Is Suitable For Operation On 220 V, Single Phase, 50 Hz Supply. Capacity 1500Gm. Suitable For Operation On 220 V. 50 Hz, Single Phase Supply. (Heico Or Equivalent) Automatic Compression Testing Machine Complete Specification As Per Appx H Attached. (Heico Or Equivalent) Hot Air Oven (450 X 450 X 450 Mm (200 Deg.C) Inside Chamber Stainless Steel With Digital Temperature Controller Temperature Range Ambient To 200 Degree Centigrade Liquid Limit Device, The Apparatus Consists Of A Brass Cup, A Crank And Cam Mechanism, Mounted On A Rubber Base Of A Specified Hardness. A Brass Pin Having A Knurled End For Easy Removal Holds The Brass Cup. The Height Of Fall Of The Cup Can Be Adjusted By А Horizontal Lead Screw. Fitted With A F.H.P. Motor To Drive The Operating Mechanism Of Cup At 120 Rpm Ensuring Uniformity In Performing Test. Works On 220 V, 50 Hz, Single Phase, And Is Supplied With Grooving Tool Type A. B, & C And Gauge Block As Per Is :9259, Is 2720 (Part-V). (Heico Or Equivalent) Length Gauge, Is:2386 (Part-1) Non Isi 1963 Required For Determining The Elongation Index Of Coarse Aggregate. It Consists Of A Metal Plate On Which 8 Steel Pins Are Vertically Mounted With Specified Distances In Between. This Assembly Is Mounted On A Hardwood Base. (Heico Or Equivalent) A/U Qty Nos 1 Nos 1 Nos 1 Set Nos Nos Nos 1 1 1 1 Contd....12/ Ser No 12 List Of Stores Annexure Il To Appondis A Hq Ce (P) Dantak Eng No 30003/Dtk/19Tf/Enq-24/E3Es Dt 10 Seр 2026 Nomenclature Stores To Be Supplied To Dett A 504 Ss&Tc (Gref), Samdrup Jongkhar (Bhutan) 29 Thickness Gauge, Is:2386 (Part-1) Non Isi 1963 Used For Determining The Flakiness Index Of Aggregates. It Consists Of A Panel Having Accurately Cut Slots Of Different Standard Lengths And Widths, (Heico Or Equivalent) 30 Flow Table (Hand Operated) Is: 712-1984 Used For Determining The Workability Of Building Lime. It Comprises: A/U Qty Nos 1 Nos 1 1) One 300 Mm Dia Polished Steel Table With Three Engraved Circles Of 70 Mm, 110 Mm And 190 Mm Dia At The Top Face I) A Frame Having A Horizontal Shaft Carrying A Cam On One Side And A Wheel On The Other, Adjusted To Raise The Table By 12.5 Mm And Allow It To Fall Freely. Iii) Truncated Conical Mould 65 Mm Inside Dia At The Bottom, 40 Mm Inside Diaat Top And 90 Mm High (Heico Or Equivalent) 31 Enamel Tray 800 X 450 X 50 Mm Nos 4 32 V Funnel Nos 1 The V-Funnel Flow (With Stand & Tray) Time Is The Period A Defined Volume Of Scc (Self Consolidating Concrete) Needs To Pass A Narrow Opening And Gives Indication Of The Filing Ability Of Scc Provided That Blocking And Or Segregation Do Not Take Place, The Flow Time Of The V-Funnel Test Is To Some Degree Related To The Plastic Viscosity. An Technical Specifications Are Given Below Top Opening Of Hopper: 515Mm X 75Mm Ngmeer Prа Cot Bottom Opening Of Hopper 65Mm X 75Mm Tapar Height: 450Mm Straight Height :150Mm (Heico Or Equivalent) Filfer Paper 110 Mm (Packet Of 100 Pcs) (Whatman Or Equivalent) 33 34 Thermometer 100 Deg.C 35 Igital Electronicweighing Machine 20 Kg Capacity 36 Sieve Shaker-Motorised Nos 1 Nos 2 Nos 1 Nos 1 Having A Sturdy Cast Iron Body, The Sieve Shaker Has An Inclined Sieve Table Which Can Accommodatea Maximum Of Seven Sieves Of 200 Mm Or 300 Mm Diameter. To Hold The Sieves An Adjustable Top Clamping Plate Is Provided. The Table Has A Gyratory Motion In Addition To Tapping Action. The Operating Gear Assembly Is Enclosed In An Oil Bath Fitted With A Transparent Oil Level Indicator Window. Suitable For Operation On 220 V, 50 Hz Single Phase Supply. Fitted With Time Switch (Heico Or Equivalent) 37 Bulk Density Apparatus 3,15,30 Ltr 38 Vicat Apparatus, With Dashpot Confirming To Is:5513-1976 Without Isi Mark For Determination Of Consistency Of Standard Cement Paste And Initial And Final Setting Times Of Cement. The Equipment Comprises The Following- I) A Frame With A Vertically Movable Rod Naving A Cap At The Top. Ii) Vicat Mould In The Form Of Frustum Of A Cone With Internal Diameter Of 60 Mm At The Top, 70Mm At The Bottom And A Height Of 40 Mm. I) Glass Base Plate For The Mould Iv) Initial Setting Time Needle. V) Final Setting Time Needle. Vi) Consistericy Plunger. Le-Chatelier Mould Conforming Is:5514-1969 Set 1 Nos 1 (Heico Or Equivalent) 39 Nos 1 Used For Determination Of Soundness Of Cement, And Class-A And Class-B Limes. The Apparatus Consists Of The Following:- I) One Split Cylinder 30 Mm Dia X 30 Mm High Made Of Spring Brass With Two Indicator Aris. ) Two Glass Plates. ) One Lead Weight Approximately 100 Gms (Heico Or Equivalent) 40 Measuring Cylinder Glass(250 Ml & 500 Ml)