Tender For Up-Gradation/ Renovation Of Sports House Bakhshi Stadium Srinagar
Tender Value
65.05 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
19 days left
EMD
1.30 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Up-Gradation/ Renovation Of Sports House Bakhshi Stadium Srinagar
BOQ
| Sl. No. | Item Description |
| 1 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF CONTROL UNIT AS PER BELOW SPECIFICATIONS Digital Conference Controller with Up to 80 Discussion Devices capable to be connected to a single Control Unit without any extension Units and expanded to a minimum of 245 Discussion Devices by using Extension Units; Touch‑button control; Built‑in Digital Acoustic Feedback Suppression (DAFS) for ensuring superior speech intelligibility, compatiable for both flush mount & table top conference unit, Third party IP Onvief Based minimum 6 camera detection and automatic tracking feature must be available for look at me configre; Built‑in MP3 recorder with internal memory and USB recording Web stick with a capacity of 128 GB, which can store up to 4,000 hours discussion, Recording/ Playback (bit rate) 256 Kbit/sec ,IP Based with browser control; Discussion modes: Open, Override, Voice activation, Push to talk, 2 x circular female connectors for loop-through connection of 40 Discussion Devices per trunk; 1 x RJ45 Ethernet connector; 1 x 3‑pole XLR female microphone input; 1 x RCA input; 1 x RCA output; 1 x RCA input/output; Limit threshold level to unit12 dB above nominal level; Sample rate: 44.1 kHz; Frequency response30 Hz to 20 kHz; Certifications: CE,FCC, UL. Approved makes:-bosch/Telvec/Bose/Audio Technica |
| 2 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF Digital based Table top Chairman Discussion Unit with Microphone On / Off Button; Priority Button for Muting all other microphones; Microphone with flexible stem and light ring; Built‑in loudspeaker; headphone jack, Microphone Length: 313 mm; Speech availability indicator to be available. Look at me Camera features inbuilt automatically when Mike will be On , Microphone on/off button Rotary volume control for adjusting headphone volume ,Loudspeaker, Frequency response (-3 dB) (Hz) (microphone),Nominal acoustic input level (dB SPL) (microphone) -85 dB SPL,Frequency response (-3 dB) (Hz) 30 Hz – 20,000 Hz,Total harmonic distortion + noise < 1%,Minimum signal-to-noise ratio (dBA) > 93 dBA,Maximum number of flush discus sion devices supported per trunk -35, 125 Hz ‒ 15000 Hz automatically muted when microphone is on and/or headphones are connected ,Possible‑To‑Speak indicator (white LED), Microphone ‘on’ indicator (red LED) , Light ring indicator on microphone stem, lights up red ,when microphone is on etc as per req. |
| 3 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING O F Digital based Table top Deligate based Discussion Unit with Microphone On / Off Button; Microphone with flexible stem and light ring; Built‑in loudspeaker; headphone jack,Microphone Length: 313 mm; Speech availability indicator to be available. Look at me Camera features inbuilt automatically when mike will be On, Microphone on/off button Rotary volume control for adjusting headphone volume Loudspeaker, Frequency response (-3 dB) (Hz) (microphone),Nominal acoustic input level (dB SPL) (microphone) -85 dB SPL,Frequency response (-3 dB) (Hz) 30 Hz – 20,000 Hz,Total harmonic distortion + noise < 1%,Minimum signal-to-noise ratio (dBA) > 93 dBA,Maximum number of flush discus sion devices supported per trunk -35, 125 Hz ‒ 15000 Hz , automatically muted when microphone is on and/or headphones are connected ,Possible‑To‑Speak indicator (white LED), Microphone ‘on’ indicator (red LED) , Light ring indicator on microphone stem, lights up red ,when microphone is on etc as per req. |
| 4 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF Power Amplifier with 120 watt or more , Multiple outputs - 70 V / 100 V and 8/4 ohm,Dual inputs with priority switching, Excellent signal to noise ratio (> 90 dB), Power reduction on backup power-1 dB Frequency response 50 Hz to 20 kHz (+1 / -3 dB at -10 dB ref. rated output) Distortion <1% at rated output, 1 kHz, Connector 3-pin XLR, balanced Sensitivity 1 V Impedance >20k ohm CMRR >25 dB (50 Hz to 20 kHz) Gain 40 dB, etc as per req. |
| 5 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF Wall mount speakers with Maximum power: 22 W; Rated power: 15 W; Power tapping: 15/7.5/3.75 W; Sound pressure level: 105/90 dB (SPL); Effective frequency range:100Hz to 19 kHz; Opening angle :166° / 83° (hor.), 140° / 76° (ver.); Transducers: 127 mm (5”) woofer, 13 mm (0.51”) dome tweeter; Operating temperature-25 ºC to +55 ºC; EN 60065, EN 60529 Water Protection |
| 6 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF 86-inch Professional LED Display/Commercial Display Monitor with minimum 86-inch diagonal screen size, UHD 4K resolution (3840 × 2160), LED backlit panel, brightness not less than 300 cd/m², contrast ratio minimum 5000:1, viewing angle 178°/178°, refresh rate minimum 60 Hz, HDMI, USB, LAN and wireless connectivity, built-in speakers, wall mounting bracket |
| 7 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF Supply, Installation, Testing & Commissioning (SITC) of 65-inch LED Display/Professional Display Monitor with minimum 65-inch UHD (3840 × 2160) resolution screen, LED backlit panel, brightness not less than 350 cd/m², contrast ratio minimum 4000:1, viewing angle 178°/178°, refresh rate minimum 60 Hz, HDMI, USB and LAN connectivity, built-in speakers, wall mounting bracket |
| 8 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF 4×4 HDMI Matrix Switcher capable of routing any of four HDMI input sources independently to any of four HDMI display outputs simultaneously. The matrix switcher shall support HDMI digital video and audio transmission, minimum resolution of 4K UHD (3840 × 2160) @ 30Hz, HDCP compliance, EDID management, front panel, |
| 9 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF Supply, Installation, Testing & Commissioning Wall Mount rack Wall Mount 9U x 550 W x 600 D, Front Glass Door (tinted, Toughened), with Lock & Key, Welded Side Walls Standard Accessories : 1U Cable Manager (1), Hardware Packet (1 Pkt), 6 Socket 5 Amp. Power Distribution Unit (1 No), Roof Mounted Fan Unit / 90 CFM /230V AC (1 No), loaded with 1x CAT6 Patch Panel.ApprovedMakes:Netgear/DLink/Rital/netrack/Valrack |
| 10 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF 1.5SQMM SPEAKER WIRE |
| 11 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF Supply, Installation, Testing & Commissioning (SITC) of 15-meter High-Speed HDMI Cable suitable for transmission of uncompressed digital audio and video signals, supporting minimum 4K UHD resolution (3840 × 2160) at 60 Hz, HDMI 2.0 or higher standard, HDCP compliant, with gold-plated connectors |
| 12 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF upply, Installation, Testing & Commissioning (SITC) of Table Mount Cable Cubby/Connectivity Box suitable for conference room and meeting room applications, recessed flush-mount type with hinged/sliding cover, providing integrated AV and power connectivity. The cable cubby shall be fabricated from high-quality metal/aluminium construction with provisions for HDMI, USB charging, USB data, RJ45 LAN, power sockets and other required AV interfaces |
| 13 | Supplu installation testing and commisiioning of loop cable of 15 Metres as a extension cable with low smoke zero halogen to comply with safety and envirnmental standards for chairman and deligates dimensions (dia) 6 mm (0.24in) unit as per req. |
| 14 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF Confrencing table 8 X20 feet with height of 30inches ,made up of 19mm boards laminated with 1mmdullmica sheet |
| 15 | OUTDOOR WELL Part-BSupply installation testing and commissioning of P4 outdoor LED Display video Wall system having following specifications: LED Type SMD 3in1 1921, Pixel Pitch (mm) 4.44 Panel Dimensions (WxHxD)/(mm) Pixel Per Pane 960x960x70 l Panel Weight (kg 216x216 ) Panel Materia 26 l Aluminum Profile Module Dimensions (WxH)/(mm) 320x320 Optoelectroni c Parameter Brightness (nit) Refresh Rate (Hz 6000 ) ≥3840 Gray scale（Bit） Contrast Ratio Color Temperature (K) 7500 Viewing Angle (H/V) (°) 160/160 Driving Type 1/9 AC Operating Voltage (V) Power Consumption (Max./Avg.)(W/m²) Application Parameter Storage Temperature (℃)-40～+60 Operating Temperature (℃)-30～+50 Storage Humidity (RH) 10%～90% Operating Humidity (RH) 10%～90% IP Rating (Front/Rear) IP65/IP54 Module Maintenance PSU & Others Maintenanc Rear/Front e Panel Installation Typ Rear/Front e Fixed Approved makes:- Barco/LG/Absen/Samsung/Chirstie |
| 16 | Supply installation testing and commissioning of Active led controller with Mobile App. WIFI, LAN, USB,and HDMI facility. INPUT OUTPUT LOADING CAPACITY:-650,000 pixels Maximum width: 2048 pixels, maximum height: 2048 pixels,1x Gigabit Ethernet output port,1x Stereo audio output connector,1x USB 2.0 (Type A) port:- Allows for USB playback,1x Fast Ethernet port:-Connects to the control computer, or connects to a LAN or public network for content publishing and screen control. firmware upgrade and storage expansion. Approved makes novastar,samsung/christie |
| 17 | Design ,Supply, Installation, testing & Commissioning of pole Mounted steel structure for holding the display board with necessary cannopy and plate form, the display plateform should be minimum 10' from average ground level, including necessary foundation as per approved design with cement concrete M20 block including all necessary anchor bolts and plates dully seemles welded, all as complete job, including all lead, lift and carraige etc.( complete job) |
| 18 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of Sheet steel Kiosk, duly manufactured made out of 2mm thick M.S. sheet steel , floor mounted, vermin and dust proof, out door type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for accomodating UPS , control system and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) |
| 19 | Supply installation testing and commissioning of 10Kva servo stablizer |
| 20 | Supply installation testing and commissioning of 10SQM ALUMINUM ARMOURED CABLE S/L , testing and commissioning of PVC Aluminum cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and Copper lugs of required size. |
| 21 | Supply installation testing and commissioning of mcb time relay and all other items require |
| 22 | Ugradation/Renovation Sports House Bakhshi StadiumDemolishing brick work manually by mechanical inculidng stacking serviceable material and disposal of unserviceable material within 50 Meters lead as per direction of Engineer-in-Charge: in cement mortar. |
| 23 | Taking out doors, windows and clerestory window shutters (steel or wood)including stacking within 50 meters lead :Of area beyond 3 sqm. |
| 24 | Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc.complete. Corridor |
| 25 | Dismantling old plaster or skirting, raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping groundwithin 50 meters lead.. |
| 26 | sub-head II repair, plastering & MasonryRepairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking outjoints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) |
| 27 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.88.2 2 mm thick |
| 28 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 29 | Painting & Finishing And Miscellaneous itemsApplying French spirit polishing, one or more coats on old work complete job partitions soffit rooms |
| 30 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting Size of tile 600x600 mm |
| 31 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new/old work |
| 32 | Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives New work (Two or more coats applied @ 1.43 litre/10 sqm. Over& including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new/old woodwork. |
| 34 | Painting with synthetic enamel paint of approved brand and manufacture on new/old steel works complete job |
| 35 | Providing and fixing aluminum hanging floor door stopper, ISI marked,anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparentor dyed to required colour or shade with necessary screws etc. complete :Twin rubber stopper |
| 36 | Providing and fixing aluminum extruded section body tubular type universalhydraulic door closer,(having brand logo with IS: 3564, embossed on the body,door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm),with double speed adjustment with necessary accessories and screws etc.complete : |
| 37 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6levers and a pair of lever handles of approved quality with necessary screws etc.complete. |
| 38 | Providing and fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with :glazing clips/putty beading as required. 5mm glass |
| 39 | GLOW SIGN BOARD ENTRANCE :Supply, Installation, Testing and Commissioning (SITC) of outdoor weatherproof LED Glow Sign Board complete in all respects, including design, fabrication, transportation, erection, testing and commissioning, comprising Aluminium Composite Panel (ACP) cladding (Viva/Eurobond/Alstone/Timex/Alstrong or equivalent approved brand) fixed over heavy-gauge MS square pipe frame, raised acrylic logo with high-intensity LED illumination and vinyl printing, raised acrylic English lettering with LED backlit/front-lit illumination, 3 mm thick acrylic solid letters, LED modules, SMPS/LED drivers, internal wiring, junction boxes, power cable, fixing hardware, sealants, painting/anti-corrosive treatment of MS members, and all accessories required for satisfactory operation.The supporting structure shall consist of 6\\" × 3\\" MS H-Girder posts of 11 ft height (where specified), embedded in PCC foundation blocks of size 2'-0\\" × 2'-0\\" × 2'-0\\", including excavation, PCC, backfilling, alignment, welding, grouting, erection and finishing complete. The item shall include all labour, T&P, loading, unloading, scaffolding/lifting arrangements, electrical connections, testing, commissioning and handing over complete to the satisfaction of the Engineer-in-Charge.6\\" × 3\\" MS H-Girder support, 11 ft high with PCC foundation block of size 2' × 2' × 2'. |
| 40 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Powder coated aluminum (minimum thickness of powdercoated 50 microns) partitionswashroom wall extension ,@8.12kg/sqm |
| 41 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on bothsides. |
| 42 | Providing and fixing glazing in aluminum door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) 22.3.2 With float glass panes of 5.0 mm thickness (weight not lessthan 12.50 kg / sqm) |
| 43 | Providing and fixing roller blinds made of high-quality polyester blackout/sunscreen fabric (minimum 280 GSM), complete with powder-coated aluminium roller tube, bottom rail, side brackets, clutch mechanism, operating chain, all accessories, including fixing to wall/ceiling complete in all respects. |
| 44 | Providing and placing Executive Office Table of size 1800 mm × 900 mm × 750 mm made of 19 mm commercial/BWR grade plywood finished with 1.0 mm laminate on top and exposed surfaces, 6 mm laminate on inner faces, edge lipping with matching PVC edge band, complete with one side storage pedestal having three drawers with telescopic channels, one cabinet with adjustable shelf and lock, modesty panel, keyboard tray (if required), cable manager, necessary SS/brass fittings, handles, locks, hinges, screws, PVC levelling bushes, polishing of exposed wooden edges wherever required, complete in all respects as approved by the Engineer-in-Charge. |
| 45 | Providing and placing Computer Table of size 900 mm × 600 mm × 750 mm, fabricated from 19 mm BWR/commercial plywood with 1.0 mm decorative laminate (Sunmica) finish on the top and exposed faces, including CPU cabinet, keyboard tray on telescopic channels, cable manager/grommet, modesty panel, PVC edge banding, all necessary fittings, handles, locks, screws, and hardware, complete in all respects. |
| 46 | Providing and fixing decorative WPC partition/separator made of 18 mm thick Wood Plastic Composite (WPC) board of approved make and design, fixed over a framework of aluminium/MS tubular sections as required, including decorative cut-outs/CNC patterns (if specified), edge finishing, screws, fasteners, adhesives, necessary hardware, complete with transportation, installation, and making good the disturbed portions, complete in all respects as approved by the Engineer-in-Charge. |
| 47 | Providing and fixing ACP sign board with 3mm ACP Sheet ,vinyl lettering,complete with SS spacers and fixtures.(Building) |
| 48 | Providing and pasting high-intensity grade retroreflective sheeting of approved colour and shade on the existing sign board surface, including surface cleaning, cutting to required size and shape, alignment, application with approved adhesive/self-adhesive backing, removal of air bubbles, trimming edges, and all labour, tools and incidental charges complete. |
| 49 | Cleaning and washing of exterior Aluminium Composite Panel (ACP) cladding of building façade using approved non-abrasive cleaning solution, soft brushes/microfiber cloth, and clean water, including removal of dust, dirt, stains and bird droppings, complete with necessary labour, scaffolding/suspended platform/rope access wherever required, tools and equipment, safety gear, disposal of waste, and cleaning of the work area, complete in all respects as directed by the Engineer-in-Charge |
| 50 | Providing and fixing premium quality blackout/jacquard/polyester curtains of approved colour and design, stitched with eyelets/pleats, complete with SS 304 curtain rod (25 mm dia), brackets, finials, rings/eyelets, holdbacks, necessary screws and fasteners, including installation, complete as directed by the Engineer-in-Charge |
| 51 | Providing and fixing door shutter made of 38 mm thick HDHMR board conforming to IS standards, having density not less than 850 kg/m³, suitable for veneer/laminate finish, complete with necessary adhesive, edge lipping, hardware fixing provisions, etc. |
| 52 | Providing and fixing 0.6 mm thick natural teak/oak veneer on both faces of HDHMR door shutter using approved synthetic adhesive, including sanding, melamine polish/PU polish, edge finishing, complete. |
| 53 | Providing and fixing 19 mm thick BWR/MR commercial plywood wardrobe shutters, finished with 1.0 mm decorative laminate (Sunmica) on the outer face and 0.8 mm balancing laminate on the inner face, including hardwood edge lipping, SS auto/soft-close hinges, handles, magnetic catch, lock, screws, adhesive, and all fittings complete in all respects. |
| 54 | Providing and fixing ACP name plate of size 300 × 150 mm (or as approved) made from 3 mm thick ACP sheet with laser-cut self-adhesive 3 mm thick acrylic letters, fixed to the wall with stainless steel studs/spacers and screws, complete in all respects |
| 55 | Providing and fixing PVC false ceiling at all heights using 8 mm thick, hollow/solid cellular PVC ceiling panels of approved make, colour and shade, fixed to a framework of G.I. perimeter channels and intermediate members or PVC battens as per the manufacturer's specifications, including screws, fasteners, edge trims, cutting to required size, making openings for light fittings, exhaust fans and other fixtures, scaffolding, all fittings, fixtures, labour, tools and tackles, complete in all respects as directed by the Engineer-in-Charge. |
| 56 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels |
| 57 | Providing and fixing wall-mounted kitchen cabinet made of 19 mm thick BWR grade plywood conforming to IS:303, finished externally with 1.0 mm thick decorative laminate (Sunmica) and internally with 0.8 mm balancing laminate, having 6 mm thick BWR plywood back, 1st class teak wood/PVC edge lipping on exposed edges, complete with shutters, SS auto-close hinges, SS handles, magnetic catches, shelves, screws, approved synthetic adhesive, necessary hardware and fittings, securely fixed to the wall with suitable fasteners, complete in all respects as directed by the Engineer-in-Charge. |
| 58 | Engagement of Unskilled Labour (Mazdoor/Beldar) for miscellaneous works complete. |
| 59 | Sanitary & Public Health Engineering (PH)Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wallswherever required :510x1040mm bowl depth 178mm |
| 60 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete:18.19.1 10 liter capacity -White |
| 61 | Providing & fixing White vitreous china water closet squatting pan(Indiantype) along with “S” or “P” trap including dismantling of old WC seat and“S” or “P” trap at site complete with all operations including all necessarymaterials, labour and disposal of dismantled material i/c malba, allcomplete as per the direction of Engineer-in charge. 14.79.2 Orissa pattern W.C Pan of size 580x440 mm |
| 62 | P/F of looking mirror of superior glass (of approved quality), rectangular size (450x350mm) with plastic molded frame of approved make and shade with 6mm thick hard board backing. |
| 63 | P/F of PVC waste pipe for counter basin/wash basin(32mm dia) |
| 64 | P/F of Electric geyser Venus, Racold or equivalent make incl. C.P Connections and all fixtures (50ltr capacity). |
| 65 | P/F of C.P Brass fittings of standards quality and make (Jaquar or eq.)(A)CP Brass BIB Cock 15mm |
| 66 | (B) CP Brass BIB Cock 15mm Long Nose |
| 67 | Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931 (Jaquar or eq.) |
| 68 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brasssingle hole basin mixer of approved quality and make, including paintingof fittings and brackets, cutting and making good the walls whereverrequired:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mmCP Brass single hole basin mixer |
| 69 | Providing and fixing uplasticized PVC connection pipe with brass unions CP Nuts Superior.15 mm nominal bore |
| 70 | P/F of two way C. P Brass Basin Mixer of approved quality and make (Jaquar or eq). |
| 71 | Providing and fixing solid brass/chromium-plated bib cocks, stop cocks, and pillar-cocks of approved design (15mm nominal bore). |
| 72 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusionwelded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. Thisincludes all fittings ,testing of joints complete as per direction of Engineer-incharge. (A) 32mm Dia |
| 73 | (B) 25mm Dia |
| 74 | (C) 16mm Dia |
| 75 | Electrical Maintenance RepairsSupply, installation, testing and commissioning of heavy-duty exhaust fan of approved make, suitable for operation on 230 V, single phase, 50 Hz AC supply, complete with capacitor, mounting frame, fixing arrangement, louvers/shutters (where provided), all accessories, including making necessary opening in wall/window, connection with existing wiring up to the nearest junction box, testing and commissioning, complete as directed by the Engineer-in-Charge. ,upto 450 mm sweep |
| 76 | SITC of Inverter Split Air Conditioner (SITC) of 2 T.R. Inverter Split Air Conditioner,complete with indoor & outdoor units,wiring and testing complete job |
| 77 | SITC of 1200 mm sweep, BEE 5-star rated BLDC Ceiling fan with remote/electronic regulator, aluminium alloy blades, 30 cm down rod,canopies,shackle kit,safety rope,copper winding complete with all accessories and external connections |
| 78 | SIT of LED recessed/surface SMD Downlighter, 8-10 W,system efficacy 120-135 lm/w powder coated diecast/extruded alumunium body |
| 79 | PSITC of LED recessed 2'x2' Panel light, 36W,system efficacy 120-135lm/w powder coated diecast/extruded alumunium body |
| 80 | SITC of LED surface mount Batten light, 18-22W,system lumen efficacy>120 and<135lm/h,powder coated diecast/extruded alumunium body |
| 81 | Providing, laying, testing and commissioning of wiring for heating point using 2 × 2.5 sq.mm + 1 × 2.5 sq.mm FRLS PVC insulated copper conductor wires drawn through heavy-duty PVC conduit, including 16A modular switch, 16A socket outlet, modular box, GI/PVC concealed box, cover plate, earthing continuity conductor, all accessories and interconnections, complete as required and connected to the existing distribution board. |
| 82 | Providing and fixing perforated pre-galvanized MS Cable tray,150x50mm deep,including couplers,bends,tees,reducers,suspenders,etc complete job |
| 83 | Rewiring/replacing light, fan, or exhaust points with 1.5 sq.mm FR PVC insulated copper conductor cable across floors. |
| 84 | P/F Modular 5/6 A, one-way switch complete with modular plate and GI/MS box |
| 85 | P/F of Modular 3-pin 5/6 A socket outlet complete with modular plate and GI/MS box |
| 86 | P/F of Modular 15/16 A Switch |
| 87 | P/F of Modular 6-pin 15/16 A Socket Outlet complete with modular plate and GI/MS box Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender