Tender For Supply Of Decorative Light, Mini High Mast, Bench And Childrens Swing In Various Parks Of Sarojini Nagar Dwitiya Ward No-18, Installation And Maintenance Work Of 5 Years.
Tender Value
36.72 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
2 days left
EMD
1.83 Lakhs
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Of Decorative Light, Mini High Mast, Bench And Childrens Swing In Various Parks Of Sarojini Nagar Dwitiya Ward No-18, Installation And Maintenance Work Of 5 Years.
BOQ
| Sl. No. | Item Description |
| 1 | FLOOD LIGHT LUMINAIRES Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect., CAT- AAA |
| 2 | Rewireable Type Switches (T.P. and T.P.N.), S&F of 32 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respect., Cat. B |
| 3 | S/B of earth rod 20 mm dia 2.5 mt long including GI wire 7/16 SWG to connected earth rod and earth clamp on pole,3 mt long steel conduit to carry earth wire along the pole complite as per approved of E/Ic. |
| 4 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., 63 mm dia (CD-63 mm & ID-51 mm nominal) |
| 5 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 10 sq. mm 2 core |
| 6 | High Tension 11 KV Grade XLPE, Deduct in item no. 501 (I) 501 (t) and 506 (a) to (f) when cables is passed through G.I./M.S. or Hume pipe in road crossing or along the wall. The cost of the G.I. pipe, hume pipe is to be extra when and where required. |
| 7 | Wiring of Submains with Aluminium cable using existing steel conduit, S/W of submain with two Nos. of 2.5 Sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material Labour and T&P required for proper completion of the work as directed at site by Engineer In Charge. |
| 8 | G.I OCTAGONAL POLE Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length each ) on RCC foundation including the cost of foundation |
| 9 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge., 10 sq. mm |
| 10 | Supply of 3.0 mt high decorative pole made of mild steel galvanized tubler pole having different profile, bottom profille 114 x 4 mm upto 1000 mm & top profile 60 mm x 3.2 mm upto 2000 mm with cast Aluminium embellisment. The pole has a service windo with 25 amp connector and SPMCB for loop in & loop out. The pole is primer coat of PU painted with 4 Nos of Foundation J-Bolt 16 mm dia 300 mm long one side threaded with Nut and washer all complite as per direction of E/Ic. (Analysis Rate) |
| 11 | E/W in foundation all complite as per direction of E/Ic. (PSR) (1x58x0.4x0.4x0.5 cum) |
| 12 | Area : 16 ft x 3 ft, platform should be at height of 5 ft, 10 ft long Slide made with FRP, Platform should be made with 18 gauge GI Checkered sheet, Ladder and Railing should be made with 25 mm NB and 20 mm NB GI Pipe. Central support should be made with 65 mm NB GI Pipe and other supports should be made with 25 mm NB GI Pipe. All nut & bolts should be galvanized.(PSR)\\" |
| 13 | Area : 5 ft dia, Complete structure should be made with 50mm NB and 25 mm NB GI Pipe. Central GI pipe of 80 mm NB should be used with the solid MS Rod of 50 mm dia. Taper roller Bearing 32310 and Ball bearing 6208zz of brand SKF/FAG/NBC should be used. Seats made with 25mm NB GI pipe & 50x25x3 mm rectangular pipe. Capacity 6 children at one time. (PSR) |
| 14 | Area : 4 ft dia, platform should be made with 16 gauge GI Checkered sheet, railing should be made with 25 mm NB GI Pipe. Central GI pipe of 80 mm NB should be used with the solid MS Rod of 50 mm dia. Taper roller Bearing 32310 and Ball bearing 6208zz of brand SKF/FAG/NBC should be used. (PSR) |
| 15 | Area : 6.5 ft x 4 ft, height of see saw should be 20 inches, Main frame and lever should be made with 50 mm NB GI Pipe, support should be made with 25 mm NB GI pipe, LLDPE Seats should be used. Lever should be fixed with bearing 6205zz of brand SKF/FAG.(PSR) |
| 16 | Supply & fixing of MS benches including cost of benches (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal grit with CC 1:2:4 cement coarse sand & 20 mm gauge stone grit including all. material 8& labour required fixing and orienting etc all complete under the direction of the E/I. Sanction Rate. |
| 17 | PATH LIGHT & BOLLARD LUMINAIRES Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect., CAT- AAA |
| 18 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 16 sq. mm 4 core |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 20 | Operation and maintenance of 1st Year (1.00) % of total estimated cost) |
| 21 | Operation and maintenance of 1st Year 1.25 % of total estimated cost) |
| 22 | Operation and maintenance of 3rd Year 1.5 % of total estimated cost) |
| 23 | Operation and maintenance of 4th Year 1.75% of total estimated cost) |
| 24 | Operation and Maintenance of 5th year (2.5% of total estimated cost) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender