Tender For Annual Repair And Maintenance Of Miscelleneous Civil Works At Industrial Estate Loni, District-Ghaziabad
Tender Value
21.94 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
9 days left
EMD
51800
Bank guarantee accepted
Document Fee
2080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Repair And Maintenance Of Miscelleneous Civil Works At Industrial Estate Loni, District-Ghaziabad
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m |
| 2 | Clearing jungle including up rooting of rank vegetations grass,push wood trees and samplings of grith upto 30 cms measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of area cleared |
| 3 | Tractor with trolly including POL and driver.for waste collection from Surface Dressing and Jungle Cleaning |
| 4 | water tanker with sprinkler 5000 lit. or above cap.with POL/Drier Including filling of water etc. |
| 5 | Providing hydraulic excavator cum loader including POL & driver 1 cum bucket |
| 6 | Excavation (by machnical/manual mean) in foundation in mixed soil with Moorum, shingle, kankar, bricks (requiring the use of special tools and plant such as pickaxes, sabbals etc.) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete |
| 7 | Providing and laying at or near ground level factory made old kerb stone in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Labour Rate Only). Rates as per Sanction Job No. CD-19 Dated 13.04.2023 |
| 8 | Cement Concrete with 2 cm gauge approved stone ballast coarse sand & cement in the proportion of 1:2:4 including supply of all materials labour tools & plants etc reguired for proper complection of the work |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete As per DSR 2023/13.80 |
| 10 | Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950. |
| 11 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ color using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 12 | Cement Concrete with 4 cm gauge approved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all materials labour tools & plants etc reguired for proper complection of the work |
| 13 | First class Brick Work in 1:6 cement & coarse sand 1.25 F.M. mortar in foundation and plinth including supply of all materials. labour and T&P etc. requried for proper completion of the work. SOR 6.02 |
| 14 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness motor grader on prepared surface, first compacting in trenches by Small Ride-on Double Drum Vibratory Roller, Capacity: 3-4 Tonnes and then compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. |
| 15 | Providing and laying 80 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
| 16 | Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). SOR Ghaziabad New Item 20.13 |
| 17 | 12 mm thick Plaster with Cement and Coarse sand of 1.25 fineness modules in 1:6 over brick work minimum thickness not to be lessthen 1 Cm including supply of all materials, labour, tools & Plants etc required for proper completion of the work. |
| 18 | R.C.C. work with cement, approved coarse sand & 20mm approved stone ballast in proportion of 1:1.5:3 in Lighter Beam including aupply all materials but excluding supply of reinforcement & its bending but including its fixing in position & binding the same with 24 BWG GI binding wire & including the cost of binding wire & including providing & fixing necessary centering & shuttering & its removal after completion of work & supply of all other materials, labour T&P etc.required for proper completion of work. SI No. 5.19 |
| 19 | S/F M:S (tor steel or plain) in plain work such as R:C:C work including bending for proper shape as necessary including bending for proper completion of the work and including supply of all steel & wastage, bend, hooks, and authorised overlapping shall be measured etc all complete as per direction of engineer in charge. |
| 20 | Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting to be used as spoil banks within 50m distance as directed by the Engineer-in- Charge. Lead Upto 10 Kms. |
| 21 | Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-109. |
| 22 | Reflective Raised Pavement Markers (Cat Eye / Road Stud) Supply and fixing of raised pavement marker with Made of Plastic body of g RPM/Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrite) ar HIPS (High Imoact Polystyrene) or Acryloniitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses containing single or dual prismnalic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mouled of methyl methecrylate conformning to ASTM D788 of equivalent. The slop or retro reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & amp; Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture epoxy installations, excess adhesive around the edge of the marker excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro reflectance of the reflecting panel, to the Engineer. In addition, a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road |
| 23 | Providing and applying tack coat on bituminious surface @ 0.20Kg/Sqm. Bitumen of grade VG-10, includig heating the bitumen, spraying the bitumen the mechanical operated spary unit fitted on bitumen boiler, cleaning and preparing the exiting road surface as per specifications.(As per Analysis Attached) |
| 24 | Providing and laying bituminous concrete 40 mm thick with higher capacity batch type hot mix plant using crushed aggregates of specified grading , premixed with bituminous binder @ 5.0 per cent of mix and filler , transporting the hot mix to work site , laying with a hydrostatic paver finisher with sensor control to the required grade , level and alignment , rolling with smooth wheeled , vibratory and tandem rollers achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects . As per CRRI Recommendation ( As per Sanctioned JOB No. CD-I (114) Dated 29.08.2024 ) |
| 25 | M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. As per SOR No. 502 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender