Tender For Emergency Repairing And Up Gradation Of Baruipur Rashmath To Sayani Audio Shop (Chakraborty Para Road) At Ward No. 6 Under Baruipur Municipality. By Adopting The Pwd (Nh) Schedule Of Rates For Road & Bridge Works 2019-20 (W.E.F. 01.06.2019
Tender Overview
Project Description
Tender for Emergency Repairing And Up Gradation Of Baruipur Rashmath To Sayani Audio Shop (Chakraborty Para Road) At Ward No. 6 Under Baruipur Municipality. By Adopting The Pwd (Nh) Schedule Of Rates For Road & Bridge Works 2019-20 (W.E.F. 01.06.2019), As Adopted Vide Government Notification No. 1M-24/26/134-R/Pl Dated 07.07.2026
BOQ
| Sl. No. | Item Description |
| 1 | Prime Coat: Providing and applying primer coat with cationic bitumen emulsion SS1 grade conforming to IS:8887 on prepared porous granular surface including clearing of road surface and spraying primer using mechanical means (Reference to MORT&H's specification clause 502). On WMM/WBM surface @ 0.70-1.0kg /sqm. Item- 1/A/i, Pg-110 of NH Schedule of Rates 2019-20 |
| 2 | Providing and laying bituminous macadam with 100-120 TPH hot mix plant using crushed aggregates of specified grading premixed with approved bituminous binder @ 3.3% (min) for Grading -1 and 3.4% (min) for Grading -2 by weight of total mix , transported to site, laid over a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504). for Grading II (19 mm nominal maximum aggregate size) Layer Thickness 50-75mm Item- 3/ii, Pg-112 of NH Schedule of Rates 2019-20 |
| 3 | Tack Coat:Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).On bituminous surface @ 0.20kg-0.3kg /sqm. Item- 10/i, Pg-119 of NH Schedule of Rates 2019-20 |
| 4 | Open - Graded Premix Surfacing Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades (Reference to MORT&H's specification clause 510).Case - I: Mechanical method using approved grade Bitumen and HMP of appropriate capacity not less than 75 tonnes/hour . Item- 10/i, Pg-119 of NH Schedule of Rates 2019-20 |
| 5 | Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511)Case - II : Type B Providing and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. Item- 1/A/i, Pg-110 of NH Schedule of Rates 2019-20 |
| 6 | 18% GST |
| 7 | 1% Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender