Tender For Emergency Repairing And Up Gradation Of Kulpi Road By Lane Opposite Of P.W.D. Stack Yard At Ward No.06 Under Baruipur Municipality. By Adopting The Pwd (Nh) Schedule Of Rates For Road & Bridge Works 2019-20 (W.E.F. 01.06.2019), As Adopted
Tender Overview
Project Description
Tender for Emergency Repairing And Up Gradation Of Kulpi Road By Lane Opposite Of P.W.D. Stack Yard At Ward No.06 Under Baruipur Municipality. By Adopting The Pwd (Nh) Schedule Of Rates For Road & Bridge Works 2019-20 (W.E.F. 01.06.2019), As Adopted Vide Government Notification No. 1M-24/26/134-R/Pl Dated 07.07.2026
BOQ
| Sl. No. | Item Description |
| 1 | Prime Coat: Providing and applying primer coat with cationic bitumen emulsion SS1 grade conforming to IS:8887 on prepared porous granular surface including clearing of road surface and spraying primer using mechanical means (Reference to MORT&H's specification clause 502). On WMM/WBM surface @ 0.70-1.0kg /sqm. Item- 1/A/i, Pg-110 of NH Schedule of Rates 2019-20 |
| 2 | Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate conforming to the grading of table 400- 13 revised vide table 2 of IRC : 109 (2015) to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density .The thickness of a single compacted layer shall not be less than 75 mm.(Reference to MoRT&H's specification 406. Item- 12, Pg-106 of NH Schedule of Rates 2019-20 |
| 3 | Tack Coat:Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).On bituminous surface @ 0.20kg-0.3kg /sqm. Item- 10/i, Pg-119 of NH Schedule of Rates 2019-20 |
| 4 | Open - Graded Premix Surfacing Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades (Reference to MORT&H's specification clause 510).Case - I: Mechanical method using approved grade Bitumen and HMP of appropriate capacity not less than 75 tonnes/hour . Item- 10/i, Pg-119 of NH Schedule of Rates 2019-20 |
| 5 | Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511)Case - II : Type B Providing and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. Item- 1/A/i, Pg-110 of NH Schedule of Rates 2019-20 |
| 6 | 18% GST |
| 7 | 1% Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender