Tender For Special Repair, Addition And Alteration Of Existing Infrastructure Of Type-V Staff Quarters Convert In To Training Hostel At Csir-Hrdc, Ghaziabad
Tender Value
1.70 Crore
Estimated cost
Bid Submission
12 Oct 2026
19 days left
EMD
3.42 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair, Addition And Alteration Of Existing Infrastructure Of Type-V Staff Quarters Convert In To Training Hostel At Csir-Hrdc, Ghaziabad
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 2 | Nominal concrete 1:3:6 or richer mix , mosic floor (i/c equivalent design mix) |
| 3 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 4 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 5 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cros sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge. |
| 6 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 7 | In cement mortar |
| 8 | Taking out doors, windows and clerestory window shutters (steel or wood) including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 9 | Of area 3 sq. metres and below |
| 10 | Dismantling steel work in built up sections in angles, tees, flats, railing and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 11 | Dismantling tile / stone work in floors and wall laid in cement mortar including complete plaster and stacking material within 50 metres lead. |
| 12 | For thickness of tiles 10 mm to 25 mm |
| 13 | Dismantling of complete fittings of wash rooms and kitchen including all CP fittings, WC with flushing cistern, wash basin, sink, CI and GI etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 14 | Dismantling grit plaster upto brick work, old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 15 | Dismantling aluminium partitions, Cupboard, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 16 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 17 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 18 | All kinds of soil. |
| 19 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 20 | Supplying chemical emulsion in sealed containers including delivery as specified. |
| 21 | Chlorpyriphos emulsifiable concentrate of 20% |
| 22 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : |
| 23 | Along external wall where the apron is not provided usingchemical emulsion @ 7.5 litres / sqm of the vertical surface ofthe substructure to a depth of 300mm including excavationchannel along the wall & rodding etc. complete: |
| 24 | With Chlorpyriphos E.C. 20% with 1% concentration |
| 25 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: |
| 26 | With Chlorpyriphos E.C. 20% with 1% concentration |
| 27 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to any level : |
| 28 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 29 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 30 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 31 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 32 | Suspended floors, roofs, landings, balconies, lintel and accessplatform |
| 33 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 34 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 35 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 36 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 37 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 38 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 39 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 40 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 41 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. |
| 42 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, flooring and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 43 | Granite stone slab of colour black, Cherry/Ruby red or any colour |
| 44 | Area of slab over 0.50 sqm |
| 45 | Providing edge moulding to 18 mm thick or above marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 46 | Granite work |
| 47 | Extra for Granite / marble / Kota stone flooring in treads of steps and risers using single length up to 1.05 metre. |
| 48 | Extra for providing holes in granite for taps and wash basin wast pipe of required size and other similar location work etc. complete. |
| 49 | Providing a set of three lines on granite with minimum 5x3mm as required gaps, cut by stone cutter straightly on the staicase treads complete in all respect as directed by the Engineer-in-Charge. (Note: for payment running length of set of lines will be measured). |
| 50 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours and shades of size 600x1200 mm as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm / approved chemical, including pointing in white cement mixed with pigment of matching shade complete. |
| 51 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 52 | Kiln seasoned and chemically treated hollock wood |
| 53 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 54 | 35 mm thick including ISI marked Stainless Steel havey duty 125mm long 04 nos. each door butt hinges with one side welded and other side necessary screws etc. |
| 55 | Extra for providing lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 56 | Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). |
| 57 | Decoretive type door |
| 58 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : |
| 59 | 2nd class teak wood |
| 60 | 50x12 mm |
| 61 | 75x12 mm |
| 62 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
| 63 | 200x10 mm |
| 64 | 150x10 mm |
| 65 | Providing and fixing bright finished Zinc door latch with necessary screws etc. complete : |
| 66 | Average size 80x60 mm |
| 67 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. |
| 68 | 65 mm |
| 69 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 70 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required in sampion colour or shade, with nuts and screws etc. complete : |
| 71 | 250x16 mm |
| 72 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 73 | Providing and fixing of following thick BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks, almirah, cupboard, table, TV unit and drawer etc. including 2mm thick PVC edge banding tape with hot glue by edge bending machine, necessary nails, screws etc. complete as per direction of Engineer-in-charge. Note : Cost of laminate, fittings like hinge, drawer channel and handle are paid seprataly. |
| 74 | (a) 19mm thick |
| 75 | (b) 6mm thick |
| 76 | Extra for using 25 mm thick BWP grade marine ply as per IS 710 of approved brand in place of 19mm thick BWP grade ply. |
| 77 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. |
| 78 | Double strip (horizontal type) |
| 79 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality as per direction of Engineer-in-Charge. |
| 80 | 1.0 mm thick |
| 81 | Providing and fixing cup board shutters 19 mm thick one side decorative lamination and other side balancing lamination factory / site pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. |
| 82 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. |
| 83 | 200 mm |
| 84 | 100 mm |
| 85 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : |
| 86 | 25 mm dia / Ovel shape |
| 87 | Providing and fixing 25mm dia stainless steel D type handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. |
| 88 | 230 mm |
| 89 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. |
| 90 | Providing and fixing stainless steel heavy type telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineerin-charge. |
| 91 | Making groove of size approx. 4mmx3mm in laminated flush door including making cutted edge smooth and application of French sprit polishing in groove complete. Note : before applying polish work masking tape should be used both sides of groove to protect the laminate. |
| 92 | Providing and fixing of 50mm or above back side of door plastic buffer to required colour, with necessary screws etc. complete. |
| 93 | Providing and installation of golden colour 65mm Brass minimum 3 key round pad door lock etc. all complete. |
| 94 | Providing and making of steel ingrave key chain average size 80x40x3mm with CSIR logo and room numbers all complete as per direction of EIC. |
| 95 | Providing and fixing of room number plate 1 mm thick of size 150x300mm with four standered studs including screws etc. all complete as per direction of EIC. |
| 96 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 97 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 98 | Profile B |
| 99 | Fixing with adjustable lugs with split end tail to each jamb |
| 100 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to MS frame with welding and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 101 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 102 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 103 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.). |
| 104 | 20 mm thick fine dressed stone flooring and riser over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. (Note: making 25mm groove at joint of stone and plaster). |
| 105 | Red sand stone |
| 106 | Providing and laying Vitrified tiles in floor & skirting in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 107 | Glazed vitrified floor tiles polished finish of size |
| 108 | Size of Tile 600 x 1200 mm |
| 109 | Glazed Vitrified tiles Matt/Antiskid finish of size |
| 110 | Size of Tile 600 x 600 mm |
| 111 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. |
| 112 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. |
| 113 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 114 | 110 mm diameter |
| 115 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 116 | Single tee with door |
| 117 | 110x110x110 mm |
| 118 | Bend 87.5° |
| 119 | 110 mm bend |
| 120 | Shoe (Plain) |
| 121 | 110 mm Shoe |
| 122 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 123 | 110 mm |
| 124 | Providing and fixing average 12.5 mm thick POP false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, all over cover with required mesh including layering of POP on mesh and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge. Note : All steps / cuts measured as per actual in Sqm. |
| 125 | Providing and fixing 6mm thick or above fibre cement boards designer tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 126 | 12 mm cement plaster of mix : |
| 127 | 1:6 (1 cement: 6 coarse sand) |
| 128 | 15 mm cement plaster on rough side of single or half brick wall of mix: |
| 129 | 1:6 (1 cement: 6 coarse sand) |
| 130 | Providing and applying plaster of paris putty of 4 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 131 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 132 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 133 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade : |
| 134 | Two or more coats on new work |
| 135 | French spirit polishing : |
| 136 | Two or more coats on new works including a coat ofwood filler etc. |
| 137 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 138 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying priming coat of interior primer and additional coats wherever required, to achieve even shade and colour. |
| 139 | Two coats |
| 140 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 141 | With cement mortar 1:4 (1cement: 4 coarse sand) |
| 142 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The Payment shall be made only once under the head of scaffolding for all works related to scaffolding, irrespective of the duration of the scaffolding. |
| 143 | Cleaning and desilting of mainhole, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 144 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm. |
| 145 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
| 146 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147 including cleaning of existing surface and pointing tile brick joints with cement mortar 1:3 (1 cement : 3 fine sand as required). The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : |
| 147 | 3 mm thick |
| 148 | Extra for covering top of membrane with bituminous aluminium paint on APP membrane to reflect sun / UV rays, one coat as per manufactures recommendation. |
| 149 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe / APP membrane etc. |
| 150 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 151 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
| 152 | 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. |
| 153 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug / waste 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 154 | Kitchen sink without drain board |
| 155 | Ractangular 610x460 mm bowl depth 200 mm |
| 156 | Providing and fixing CP Brass Single lever wall mixer 3 in 1 system with spout and provision for overhead shower with CP bend pipe, connecting legs and wall flange of approved quality by Engineer in charge. (a) 15 mm nominal dia |
| 157 | Providing and fixing of overhead shower 100mm dia with arm and wall flange of approved quality by Engineer in charge. (a) 15 mm nominal dia |
| 158 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 159 | Semi rigid pipe |
| 160 | 32 mm dia |
| 161 | Providing and fixing 100 mm Havey duty SS grating for trap. |
| 162 | Providing and fixing aluminium framed metal decorative wall mount looking mirror with hook for hanging on wall mirror of superior superior glass (of approved quality) and of required shape, size with 6 mm thick hard board backing and screws etc. complete. |
| 163 | Circular shape 600 mm dia |
| 164 | Providing and fixing toilet paper holder with wall flange: |
| 165 | C.P. brass |
| 166 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 167 | 45 cm length or above |
| 168 | [a] 15 mm nominal bore |
| 169 | Providing and fixing C.P. brass bib cock with wall flange of approved quality conforming to IS:8931 : |
| 170 | 15 mm nominal bore |
| 171 | Providing and fixing C.P. brass long nose bib cock with wall flange of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 172 | 15 mm nominal bore |
| 173 | Providing and fixing C.P. brass angle valve with wall flange for basin mixer geyser and cistern of w.c. approved make conforming to IS : 8931. |
| 174 | 15 mm nominal bore. |
| 175 | Providing and fixing Stainless Steel 450mm long foldable towel rack with rail and hooks etc complete with brackets fixed to PVC cleats with CP brass screws with concealed fittings arrangement of approved quality. |
| 176 | Providing and fixing Stainless Steel towel ring rectangular / trapezium shape average 130 mm long, 180 mm wide with minimum distances of 33 mm or above from wall face with concealed fittings arrangement of approved quality complete. |
| 177 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 178 | Providing and fixing ABS Chrome finish Health Faucet with flexible tube 1.0 metre long and wall hook as approved by Engineer - in - charge. |
| 179 | Providing and fixing thin rim table top rectangular edge round average size 495x395x150 mm Vitreous china white wash basin with 15 mm dia CP Brass single hole long basin mixer and 32mm long size C.P. brass waste of standered pattern of approved quality, including making good the walls wherever required all complete. |
| 180 | Providing and fixing following dia soil, waste and vent uPVC SWR pipes, ISI marked, conferming to 13592, Type B under ground or above ground level including jointing with seal ring and adhesive solvent for jointing all complete as per direction of Engineer-in-Charge.Make : Prakash /Supreme/ Ashirvad or equivalent. |
| 181 | [a] uPVC Pipe 110 mm dia pipe |
| 182 | [b] uPVC Pipe 75 mm dia pipe |
| 183 | Providing and fixing following dia soil, waste and vent uPVC SWR fitting, ISI marked, conferming to 14735 under ground or above ground level inccluding jointing with seal ring and adhesive solvent for jointing all complete as per direction of Engineer-in-Charge.Make : Prakash /Supreme/ Ashirvad or equivalent. |
| 184 | [1] uPVC fittings 110 mm dia |
| 185 | (a) Plain Bend |
| 186 | (b) Door Bend / Tee |
| 187 | (c ) Plain Tee |
| 188 | (d) Nahani Trap 110x110mm |
| 189 | [2] uPVC fittings 75 mm dia |
| 190 | (a) Plain Bend |
| 191 | (b) Door Bend / Tee |
| 192 | (c ) Plain Tee / multiconnector 110/75 |
| 193 | (d) Nahani Trap 110x75mm |
| 194 | Providing & Fixing 32 mm nominal bore CPVC gate valve with handle of approved quality all complete. |
| 195 | Providing & Fixing 32 mm nominal bore CPVC water tank connection of approved make and quality all complete as per direction of EIC.. |
| 196 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & all required fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 197 | Internal work- Exposed on wall |
| 198 | [a] 25 mm nominal outer dia Pipes |
| 199 | [b] 32 mm nominal outer dia Pipes |
| 200 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & all required fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 201 | Concealed work, including cutting chases and making good the walls etc. |
| 202 | [a] 20 mm nominal outer dia Pipes |
| 203 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 204 | 32 mm nominal dia Pipes |
| 205 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 206 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 207 | 25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 208 | Cutting holes up to 70x50 cm in walls including making good the same: |
| 209 | With common burnt clay F.P.S. (non modular) bricks |
| 210 | Cutting of core hole in RCC up to 150mm dia or above including all instuments and making good the same: |
| 211 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 212 | 100x100 mm size P type |
| 213 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 214 | Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 215 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : |
| 216 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 217 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality |
| 218 | L D- 2.5 |
| 219 | Rectangular shape 600x450 mm internal dimensions |
| 220 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
| 221 | For pipes 100 to 250 mm diameter |
| 222 | Raising manhole cover and frame slab to required level including dismantling existing slab, complete manhole neat plaster and making good the damage as required (Raising depth of manhole to be paid separately) : |
| 223 | Rectangular manhole 90x80 cm with rectangular fram & cover 600 x 450 mm of grade LD - 2.5 |
| 224 | Providing and fixing factory made uPVC glazed / wire mesh windows / door comprising of lead free uPVC multi-chambered frame, sash and mullion / coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for series R1 and R2 profile and 2.10 mm for series R3 and R4 profile conforming to EN : 12608 in any shape, colour and designe duly reinforced with galvanized mild steel section made of required shape & size as per CPWD specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gaskit, hardware, SS 304 grade fasteners of minimum 8 mm dia with counersunk head, comprising of matching polyamid PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile fram, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the both side gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per designe approved by Engineer-in-Charge. Note: Wire mesh / Glazing of plain / toughened/ laminated / double glass unit with / without high performance coating as per designe requiredments and conferming to IS : 3548 & IS : 16231 shall be paid separately. |
| 225 | Casement cum fixed panel window having one single casement panel & one fixed panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coating handles. |
| 226 | Using R2 series with fram (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & mullion (39 mm & above) x (0 mm & above). (Height upto 1.2 mtrs, each openable shutter upto 0.8m width). |
| 227 | Casement cum fixed panel window having single casement panel at both ends & middle & upper two fixed panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coating handles. |
| 228 | Using R2 series with fram (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 mtrs, each openable shutter upto 0.8m width). |
| 229 | Providing and fixing glazing in uPVC / aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . |
| 230 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 231 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 232 | With stainless steel cover plate minimum 1.25 mm thickness |
| 233 | Providing and fixing SS tubular handle bar 25 mm outer dia, 450mm long or above with inner screws etc .complete as per direction of Engineer-in-Charge. |
| 234 | Providing and fixing bottom floor Brass 100mm mortice lock (best make of approved quality) for fram less glass doors including necessary cutting and making good etc. complete. |
| 235 | Providing and installation of frosted / other glass film on the doorand windows inluding cutting of required words and also making patterns as approved of make 3M / Garvare or equivalent all complete as per direction of Engineer-in-Charge. |
| 236 | Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately) |
| 237 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. |
| 238 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group A |
| 239 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 240 | 2x 2.5 sqmm + 1 x 2.5 sq. mm earth wire |
| 241 | 2x 4 sqmm + 1 x 4 sq. mm earth wire |
| 242 | 2x 6 sqmm + 1 x 6 sq. mm earth wire |
| 243 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch, connections, painting etc. as required. |
| 244 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5pin 15 /16 amps modular socket outlet and 15 / 16 amps modular switch, connections, painting etc. as required. |
| 245 | Supply and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts \\"C\\" curve DP MCB including supply complete with connections, testing and commissioning etc. as required. |
| 246 | Supplying and drawing co-axial TV cable RG-6, 0.7 mm solid copper conductor PE insluated, sheiled with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required. |
| 247 | Supplying and drawing 2 Pair pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 248 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 249 | 20 mm |
| 250 | 25 mm |
| 251 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required |
| 252 | 5/6 amp switch |
| 253 | 3 pin 5/6 amp socket outlet |
| 254 | 15/16 amp switch |
| 255 | 6 pin 15/16 amp socket outlet |
| 256 | Telephone socket outlet (RJ 11 single with shutter) |
| 257 | TV antenna Socket outlet |
| 258 | Supplying and fixing following size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. |
| 259 | 1 or 2 Module (75 mm x 75 mm ) |
| 260 | 6 Module (200 mm x 75 mm) |
| 261 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 262 | Supply of Ceiling fan (100% copper) with 1200 mm sweep blades, high speed, 230 V , 50 Hz, Single Phase, white colour etc. complete as required. |
| 263 | Supplying and fixing one module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 264 | Installation, testing and commissioning of Ceiling fan, including the down rods of standard lenght (up to 30 cm) with 1.5 Sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 265 | Supplying, Installation, testing and commissioning of round LED downlighter 15 W or above , 6500K, with all required drivers other related accessories on false ceiling etc. complete in all respect. |
| 266 | Supplying of Wall Bracket Light fitting with 9 watt LED bulb etc complete as required. |
| 267 | Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS /CFL /LED lamps per fitting, complete with all accessories including connections etc. as required. |
| 268 | Supplying, installtion, testing and commissioning of 10 Watt or above 2 Feet LED Batten ( Cool Day Light 6500K) 240 V, 50Hz, fitting on surface / recessed with all acessories etc complete in all respect. |
| 269 | Supplying, installtion, testing and commissioning of 20 Watt or above 4 feet LED Batten ( Cool Day Light 6500K) 240 V, fitting on surface / recessed with all acessories etc complete in all respect. |
| 270 | Supplying, installation, testing and commissioning of of 32 A, 240V (white) D.P. Main Switch Operating with Key Tag 2 Module Make - Anchor ROMA etc complete as required |
| 271 | Supply of 300 mm sweep exhaust fan with louvers, single phase, above - 900 RPM complete with all accessories etc complete in all respect. |
| 272 | Installation of Upto 450 mm sweep exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 273 | Supply, Installation, Testing and Commissioning of 25 litres water vertical type geyser 4/5 star, 230 V , 50 Hz, Single Phase including IN & OUT water connections etc complete in all respect |
| 274 | Supplying and fixing of 6 way (4 + 18), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). |
| 275 | Supplying and fixing of 6 Way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). |
| 276 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 277 | Single pole |
| 278 | Single pole and neutral |
| 279 | Supplying and fixing 63 amp, 10 KA TPN \\"C\\" curve MCB, 415 V, in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 280 | Providing and fixing 200 Amps ,36KA,FPMCCB rating and breaking capacity MCCB with sheet steel enclosure ( cubicle panel board size 9200x400x200 mm) with 300 amp copper bus bar (size 50x5) on surface/ recess, thermomagnetic release and terminal spreaders including rilling holes in cubicle panel, making connections, etc. as required. |
| 281 | Supplying of following size Aluminium armoured XLPE / PVC insulated and PVC sheathed cable of 1.1 KV grade. |
| 282 | (a) 3.5 core x 120 sq mm |
| 283 | (b) 3.5 core x 50 sq mm |
| 284 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size above 95 sq.mm and upto 185 sq.mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required |
| 285 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface/recess as required. Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3 mm MS flat clamp) |
| 286 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface/recess as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x 3 mm MS flat clamp) |
| 287 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 120 sq. mm (45mm) |
| 288 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 50 sq. mm (32 mm) |
| 289 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required. |
| 290 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long, digging etc. with charcoal/ coke and salt as required. |
| 291 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 292 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 293 | Supply, Installation, Testing and Commissioning of Window type Air conditioners complete with 100% copper coil, copper power cable upto 3 Mtr, wireless Remote, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing, cooling, dehumidification, air circulation, R-32/R-410A /R-407B Green Refrigerant with Scroll / rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB), antifreeze thermostat on the coil as a safety feature, complete with fixing including T&P & labour etc as required complete in all respect as specified of following capacity. Sound level of up to 50dB inside the room is acceptable. The unit shall be in confirmation with IS 1391 Part-I 2023 and CPWD Specification. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. The system shall be able to operate up to 50 0C (out door ambient temperature). |
| 294 | Inverter Type |
| 295 | 1.5 TR with Inverter 5 Star BEE rating |
| 296 | Supplying, installation. Testing and commissioning of 4 KVA Automatic capacity 140-280V Copper Digital Voltage stabilizer for Window 1.5 TR Air-Conditioner unit etc complete as required. |
| 297 | S/I/T/C of 1 HP mini surface water pump single phase with water pressure boosting 24-Liter tank with accessories NRV, 5-way connector, pressure switch, pressured gauge and dry run protection and making all required connections of existing water pipe at terrace level all complete as per direction of EIC. |
| 298 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in exisiting cubicle panel board / feeder pillar including drilling holes in cubicle panel / feeder pillar , making connections with suitable size AL bus bar, Cable leads & lugs etc including dismantling of existing MCCB, etc. complete in all respect. |
| 299 | 250 A, 35 KA, TPMCCB |
| 300 | 100 A, 16 KA, TPMCCB |
| 301 | Disconnecting & dismantling of existing flourescent fitting, switch, socket boards, MCB box, DB Box, including wiring etc. complete as required. |
| 302 | Upgradation of the existing Matrix EPABX from 64 Analog Extensions to 96 Analog Extensions by additing 32 Port Analog Extension Card including covering the complete EPABX under warranty for One Year all complete as per direction of EIC. |
| 303 | Supply and installation of Digital Phone EON510 with 240x64 Pixels LCD graphical display with backlit / digital keyphone with onetouch easy access to different line extensions ( Built in 16 keys) / with adjustable desk mount with full duplex speaker phone / handset interface 3.5mm all complete as per direction of EIC. |
| 304 | Supply & installation of Beetel G20, TEC Certified, caller ID phone LCD Display, ringer LED, DTMF / FSK compatible, adjustable handset / ringer valume, music on hold, desk / wall mountable. 3 level LCD contrast, alarm as required. |
| 305 | Supply and laying of 50 pair copper conductor armoured jelly filled cable underground and on wall as required. |
| 306 | Supply and laying of 20 pair copper conductor armoured jelly filled cable underground and on wall as required. |
| 307 | Supplying, installation, testing and commissioning of 50 PAIR Main Distribution Frame (MDF) box with Krone connectors module and frame etc complete in all respect. |
| 308 | Supplying, installation, testing and commissioning of 20 PAIR Main Distribution Frame (MDF) box with Krone connectors module and frame etc complete in all respect. |
| 309 | Rewiring and restructuring of the patch cables of the existing EPABX- 64 extensions all complete as per direction of EIC. |
| 310 | Supplying and fixing Internet I/O socket outlet modular RJ-45 on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 311 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable |
| 312 | Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HOPE pipe lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 em below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 313 | Buy back of following electrical and civil items: |
| 314 | Salvage value of dismantled / old Ceiling fan \\"As is where is basis\\" |
| 315 | Salvage value of dismantled / old Exhaust fan \\"As is where is basis\\" |
| 316 | Salvage value of dismantled / old flouresent tube light fitting \\"As is where is basis\\" |
| 317 | Salvage value of dismantled / old Aluminium Cable any size \\"As is where is basis\\" |
| 318 | Salvage value of dismantled / old Door shutter any size \\"As is where is basis\\" |
| 319 | Salvage value of dismantled / old MS door & window/DB box/switch & sockets / RCC bars /door locks/handles/ MS railing/ angle/ CI & GI pipes or any type loha / sheet / AC duct and similar scraps etc. \\"As is where is basis\\" |
| 320 | Salvage value of dismantled / old Brass basin mixer / bib cock/long body / angle valve/ pillar cock etc. \\"As is where is basis\\" |
| 321 | Salvage value of dismantled / old Aluminium door/ window / fram etc \\"As is where is basis\\" Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender