Tender For Repair/Comprehensive Maintenance Of B/R And E/M Services Pcda (Cc) Office Complex And Pao ( Ors) 11 Grrc Under Ge (West) Lucknow
Tender Value
49.95 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
20 days left
EMD
99900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Comprehensive Maintenance Of B/R And E/M Services Pcda (Cc) Office Complex And Pao ( Ors) 11 Grrc Under Ge (West) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (WEST ) Lucknow Name of Work : Repair/Comprehensive Maint of B/R and E/M services PCDA (CC) Office Complex and PAO ( ORs) 11 GRRC under GE (West) Lucknow Contract No: GE/W/LKO/T-115 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words 8.0 |
| 2 | M & L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work complete all as specified and directed. |
| 3 | M & L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed. |
| 4 | M & L for rendering/plaster by using readymix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar complete all as specified and directed. |
| 5 | M & L for repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and plastering the wall surface with white cement based polymer modified self curing mortar, including taking down cement or cement lime plaster, raking out joints and disposal of rubbish, complete all as specified and directed. |
| 6 | M&L preparation of New/old plastered surface of walls with 1mm wall care putty complete all as specified and directed. |
| 7 | M & L for preparation of newly plastered surfaces of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and including priming coat over and including applying minimum 1mm thick wall care water proofing putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed. |
| 8 | M & L for repair to plaster by using readymix mixture of thickness 5 mm to 7 mm in ceiling and plastering the surface with white cement based polymer modified self curing mortar, including taking down cement or cement lime plaster, raking out joints and disposal of rubbish, complete all as specified and directed. |
| 9 | M & L for complete removal of existing treatment on ceiling surface and preparation of old plastered ceiling surface and applying two coats of distemper oil emulsion complete all as specified and directed. |
| 10 | M & L for premium quality joint free non skid ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 11 | M & L for premium quality joint free non skid ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors / skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 12 | M & L for joint free glazed coloured GLOSSY tiles, superior quality of size 300 x 450 x 7mm thick/300 x 600 x 7 to 8mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 13 | M & L for Granite 18- 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 including moulding (rounding edges), demolition of existing stone slabs laid bedded and pointed in any mortar and including rounding to edges of stone slabs one edge, such as in cooking platform, and other similar situations etc complete all as specified and directed. |
| 14 | M & L for Marble Green 18 to 20 mm thick (table rubbed and pre-mirror polished) in single piece with grooves at the edges in steps (treads/risers) and like set and jointed in neat cement slurry including pointing in epoxy grout to match marble shade, laid over and including 15 mm thick screed bed in CM 1:4 including demolition / roughening of existing surfaces incl rounding edges and double grooves (in every step) complete all as specified and directed. |
| 15 | Dismantling brick tiles or terracing tiles, single layer of roofs including demolition and removing of mud in roofs any thickness including plastering and leeping (whether full thickness removed or part thereof ) and demolition material disposed out from MoD land and including roughening surfaces of old concrete by picking, sweeping/Brushing clean and washing down with water to remove dust and apply neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed. |
| 16 | M & L PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in roof kerbs/roof padding /benching or mud stops, and platform for mounting service tanks, rounded,chamfered on edges including necessary use and waste of from work etc complete all as specified and directed |
| 17 | M & L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) Applying a coat of fibre reinforced PU primer confirming to ASTM D412 @ 30% water dilution on prepared surfaces & laying of glass fibermesh 45 gsm over tacky surface and allow it to dry.(b) Supply and Applying 2 coats of Hybrid PU based elastomeric single component coating over primer surface @ 10kg /10.76 Sqm total consumption having below properties:-1. Elongation - 500%-600%2. Solid contents - 80%, 3.Tensile Strength - 1.6N/mm2 4. Adhesion to concrete - 2.2N/mm2 5. Initial hardness shore strength - 60Min. 6. Tear Strength - 14Mpa. 7. Total thickness of layer shall be 1.2 - 1.5mm.Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.The work for roof treatment shall include the following and the rates quoted by the bidder shall include the same complete all as specified and directed. |
| 18 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed. |
| 19 | Taking down chawkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed. |
| 20 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and including fixing in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 21 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and including fixing in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 22 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including supplying and fixing with stainless steel butt hinges of 100mm size with necessary full body threaded star headed counter sunk S.S screws, and 4 no. stainless steel butt hinges complete all as specified and directed. |
| 23 | S&F 5mm thick Solid PVC Wall Lining consisting of 5mm thick any colour lamination PVC sheet incluseive of solvent cement and fixing at site on PVC frame as per specifications and drawing including taking down wall panelling and similar work including cover filledt etc complete all as specified and directed. |
| 24 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 25 | S & F 300mm long Stainless steel six peg hanger chromium plated as approved complete all as specified and directed. |
| 26 | S & F 250 mm Stainless steel ,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 27 | S & F 150 mm long Stainless steel matte finish ,barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 28 | S & F 200mm long Stainless steel matte finish ,barrel tower bolts of extruded section complete all as specified and directed. |
| 29 | S & F 100mm size Stainless steel matte finish hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 30 | S & F 75 mm size a, stainless steel matte finish Bow Handle fixed with screws for kitchen cabinet & below platform complete all as specified and directed. |
| 31 | S & F Stainless Steel handle matte finish fabricated type 150mm long complete all as specified and directed. |
| 32 | S & F Continuous (piano) hinges of size of flap 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and directed |
| 33 | S & F Magnet Ball catches with 8mm dia steel ball, and brass body and striking plate for cup board / cabinet shutters complete all as specified and directed |
| 34 | S & F 300 mm long MS ordinary pattern door spring \\"plate type\\" including roller and roller plate complete all specified and directed. |
| 35 | S & F two (double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed. |
| 36 | S&F in position rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank float including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed. |
| 37 | Framed work such as grills,gratings, etc.. with ends of bars,shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed. |
| 38 | Welded steel wire fabric supplied and fixed complete to wood or steel member not exceeding 4 kg as complete all as specified and directed. |
| 39 | M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified and direced. |
| 40 | S&F in repair 25mm dia stainless steel curtain rod, superior quality (weight not less than 300 g/RM) with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed. |
| 41 | S & F in repair looking mirror of size 600 x 450mm of 6 to 8 mm thick fixed with stainless steel studs complete all as specified and directed. |
| 42 | S & F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed. |
| 43 | S & F in repair vitreous china Wash hand basin white, flat back type of size 550x400mm including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10X7.5X15cm, 32mm dia PVC waste pipe and 32mm bore chromium plated brass waste coupling with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 44 | S & F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed. |
| 45 | S & F in repair 10 ltrs capacity PVC valveless syphonic double action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 46 | S & F in repair for CP bib taps 15mm fancy type long body Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified. |
| 47 | S & F in repairs brass Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of 15 mm bore size complete all as specified and directed. |
| 48 | S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed. |
| 49 | S & F in repair Gun-metal, globe or gate valves 25mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 50 | S & F in repairs Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 51 | S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed. |
| 52 | S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed. |
| 53 | M & L for 50mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long, including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness and below or above ground level complete all as specified and directed |
| 54 | M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness and below or above ground level complete all as specified and directed |
| 55 | Providing and laying ISI marked 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 56 | M & L for Providing precast cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) as cover slabs (for man holes etc.) set in CM 1:4 and similar articles with plain faces including use and waste of formwork complete all as specified and directed |
| 57 | M & L Mild Steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 58 | Repairing of RCC projections, chajjas, roofs,facia etc by necessary preparation, scrapping, cutting , chieseling, derusting and cleaning exposed reinforcment, surfaces of damaged loose RCC and providing cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm at any height complete all as specified and directed. |
| 59 | Taking down steel tubing of 15 mm dia (Nominal bore) and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 60 | Supplying and laying of CPVC pipes of external dia 20mm, SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 61 | Taking down steel tubing of 20 mm dia (Nominal bore) and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 62 | Supplying and laying of CPVC pipes of external dia 25mm, SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 63 | Supply and fixing brass tee, elbow, reducer, coupling and all other fittings of size 20mm complete all as specified and direcetd. |
| 64 | Supply and fixing brass tee, elbow, reducer, coupling and all other fittings of size 25mm complete all as specified and direcetd. |
| 65 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 66 | S & F in repair PVC (SWR) 110 mm size pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all specified and directed. |
| 67 | S & F in repair PVC (SWR) 75 mm size pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all specified and directed. |
| 68 | S & F in repair PVC (SWR) 75 mm size pipes single socketed, in any length with rubber ring joints, fixed to walls complete all specified and directed. |
| 69 | S & F in PVC (SWR) 110 mm bends, any radius complete all specified and directed |
| 70 | S & F 75mm bore PVC (SWR) bend, any radius with / without access door complete all specified and directed |
| 71 | S & F in PVC (SWR) 110 mm Tee, equal or unequal complete all specified and directed |
| 72 | S & F 75mm bore PVC (SWR) Tee, equal or unequal complete all specified and directed |
| 73 | S & F PVC (SWR) 75 mm bore floor trap including jointing with solvent cement complete all as specified & directed. |
| 74 | S & F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 75 | S & F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof of 110mm dia pipe complete all as specified & directed. |
| 76 | S & F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof of 75mm dia pipe complete all as specified & directed. |
| 77 | S & F CP grating 100mm dia with/without waste hole complete all as specified & directed. |
| 78 | S & F CP extension nipple of 20mm bore complete all as specified & directed. |
| 79 | S & F in repair suspended false ceiling with \\"E\\" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips complete all as specified and directed. |
| 80 | S&F in repair Gypsum Board 12mm thick , white prelaminated sett embossed reinforced designer ceiling boards of approved texture at all height laid on hot dipped GI imposed grid with 24mm wide T sec exposed flanges which shall be pestered coated white. The frame work shall comprise of main runner made from 0.33 mm thick GI sheet of size 24x32x300mm and spaced at 1200 mm C/C securely fixed to the structural soffits by approved hangers at 1200mm c/c. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, screw etc. The last hanger at the end if each main runner shall not be greater than 450mm from adjacent wall, flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runner at 600mm C/C to form 1200x 600 mm modules cross tee longer than 600mm to be supported independently 1200x600 dodules formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee perimeter wall angle shall be made of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturers instructions and applying two coat of oil bound distemper over a coat of wall care putty complete all as specified and directed. |
| 81 | S & F in Repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) basin only including connections to flushing pipe and outgoing pipes, spreader fixed in repairs complete all as specified and directed. |
| 82 | S&F in repair vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and directed. |
| 83 | M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc.including demolition of Cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and directed |
| 84 | M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in with grey cement & no pigments over and including Screed bed or bedding layer of mortar 15 mm thick in Cement mortar 1: 4 for laying floor finishes complete all as specified and directed |
| 85 | S & F of Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 86 | S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed |
| 87 | Repairing/ easing to anodized aluminium glazed window shutters/ doors any type window side hung shutter including fixing of left or right handle, hinges, tower bolt etc complete all as specified and directed. |
| 88 | S & F 12mm thick toughned glass as in hinged doors, partition automatic doors and similar work including cutting to shape, drilling holes required including all fittings and fixtures complete all as specified and directed. |
| 89 | Supply and fixing factory made UPVC white colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 110 x 45 mm & sash 40 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension comprising of UPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Note-1. Glazed shutters float glass thickness shall be not less than 5.00 mm and wire mesh shutter with Stainless steel (SS-304) wire mesh 0.36 mm dia with aparture 1.4mm shall also be deemed included in quoted rates and No extra payment will be made separalely 2. For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 90 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed. |
| 91 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 1.5 sqmm including PVC insulated FRLS copper earth continuity conductor 1.5 sqmm, colour-coded as per IS, drawn through and including existing conduit/PVC Casing capping/Surface Conduit medium grade with all necessary conduit fittings and accessories such as bends, tees, couplers, junction boxes etc concealed in wall/roof/floor etc, including cutting chases in wall and making good disturbed surface to match of walls/ceiling, with concealed sunken GI metal box of minimum 1.0 mm thickness, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, complete for the following:– (a) One light or one fan point controlled by one switch complete all as specified and directed. |
| 92 | All as item No 90 above but one 3 pin socket outlet 06 Amps point on the same board with other switches complete all as specified and directed |
| 93 | All as item No 90 above but one socket outlet 6 Amp controlled by one switch on indepdendent board complete all as specified and directed |
| 94 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 2.5 sqmm including PVC insulated FRLS copper earth continuity conductor 2.5 sqmm, colour-coded as per IS, drawn through and including existing conduit/PVC Casing capping/Surface Conduit medium grade with all necessary conduit fittings and accessories such as bends, tees, couplers, junction boxes etc concealed in wall/roof/floor etc, including cutting chases in wall and making good disturbed surface to match of walls/ceiling, with concealed sunken GI metal box of minimum 1.0 mm thickness, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc, complete for one 6A or 16 A socket outlet point controlled by one switch on independent board complete all as specified and directed. |
| 95 | S&F Switch Piano flush type, single pole one-way, 6 Amp of approved make, with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 96 | S&F Switch Piano flush type, single pole one-way switch, 16 Amp of approved make, with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 97 | S&F socket outlet, flush type, 6 Amp, 3 pin 230 V of approved make with all necessary fixing accessories and electrical connections complete. |
| 98 | S&F socket outlet, flush type multipurpose 2in1, 6/16 Amp, 3 Pin 230 V of approved make with all necessary fixing accessories and electrical connections complete. |
| 99 | S&F stepped type electronic fan regulator flush type suitable for 230 V, 50 Hz AC supply, including making necessary connections complete. |
| 100 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 1.5 sqmm including PVC insulated FRLS copper earth continuity conductor 1.5 sqmm, colour-coded as per IS, drawn through and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour of size not less than 25 mm dia with all necessary conduit fittings and accessories such as bends, tees, couplers, junction boxes etc including concealed sunken modular GI metal box of minimum 1.0 mm thickness with approved colour modular mounting polycarbonate front plate and ABS under plate with CRCA metal frame and zinc-plated steel screws suitable for mounting modular switches, sockets, regulators etc complete for the following:– (a) One light or one fan point controlled by one switch complete all as specified and directed. |
| 101 | All as item No 99 above but one socket outlet 6 Amp controlled by one switch on the same board with other switches complete all as specified and directed |
| 102 | All as item No 99 above but one socket outlet 6 Amp controlled by one switch on indepdendent board complete all as specified and directed |
| 103 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 2.5 sqmm, including PVC insulated FRLS copper earth continuity conductor 2.5 sqmm, colour-coded as per IS, drawn through and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour, of size not less than 25 mm dia, with all necessary conduit fittings and fixing accessories, including sunken GI metal box of minimum 1.0 mm thickness with approved colour modular mounting polycarbonate front plate and ABS under plate with CRCA metal frame and zinc-plated steel screws suitable for mounting modular accessories, complete for one 6A or 16 A socket outlet point controlled by one switch on independent board. |
| 104 | S&F modular one-way switch, 10 Amp, 1-module size of approved make, with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 105 | S&F modular one-way switch, 16 Amp, 1-module size, of approved make, with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 106 | S&F modular socket outlet, 6 Amp, 2/3 pin combined, 2-module size, of approved make with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 107 | S&F modular socket outlet, 6/16 Amp, 2/3 pin combined, 2-module size, of approved make with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 108 | S&F electronic type modular fan regulator of 120 W rating, 2 module suitable for 230 V, 50 Hz AC supply, including making necessary connections complete all as specified and directed. |
| 109 | S&F Ceiling rose surface bakelite three terminal complete all as per specified and directed. |
| 110 | S&F angle type holder insulated body with back plate suitable for batten fittings as directed. |
| 111 | Supply and Fixing in replacement of wall/surface mounting luminaires integrated LED Batten 20/22 W, 5700K / 6000K / 6500K,120 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25K burning hours, 2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed. |
| 112 | Supply and fixing in replacement of wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 5700K/6000K/6500K, 230V , minimum 100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements all as per specified and directed . |
| 113 | S&F in replacement of LED bulb 12 watt, complete all as specified and as directed. |
| 114 | Supply & fix in replacement of LED Ceiling /surface mounted down lighter warm white / white colour,12 to18 watt round/ squre profile,including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete . |
| 115 | S&F in replacement of LED Building security light 20/25 Watt with high power LED source (>120 lumen/watt) PDC housing, IP66 and IK 08 with 4 KV inbuilt surge protection ,minimum 50000 burning hours hv cutoff@325/440 volt protection for 8 hours including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories . |
| 116 | S&F in replacement of GI pipe light grade, 32 mm bore, 1.20 mtr long bend in required shape, MS clamp 40x3mm thick duly painted with two coats of synthetic enemal paint fixed on wall including bolts and nuts complete all as specified and directed. |
| 117 | Supply and fix in replacement of LED gate light of 25/30 W LED Postop luminaire with aluminium pressure die-cast mounting spigot & polyester powder coating in addition to a specific weathering resistance treatment, color RAL7011. Non-yellowing transparent Polycarbonate UV-protected round symmetrical diffuser with circular radial pattern for glare-free and even light distribution. High Efficiency long life LED module with efficacy of >100Lm/W, CCT 4000K, and CRI >70. Powered by built-in electronic driver with THD <10%, 4kV inbuilt surge protection, high cut-off at 325V & auto-restart, including 8hrs. protection from 440V (P2P). Incl GI Pipe 40mm dia 0.45mtr long fixed in gate pole with PCC 1:2:4 of 0.20 mtr height and size of existing gate pole. Fixture lumen efficacy >4500 Lm, IP66 (no glue), IK05, PF>0.95, Operating voltage range: 140- 277V, all as specified and directed . |
| 118 | S&F in replacement of super bright LED (2X2), 36 W, 6500 K recess mounting minimum 100Lumens/watt IP20 ,IK02 PF>.9 and 4kv inbuilt surg protection with high efficent LED source all as per specified and directed. |
| 119 | M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES SSR Part-I (2009) connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, earth pit cover 40 mm thick reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete all as specified and directed. |
| 120 | S&F in replacement of sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 100 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated,IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 121 | S&F in replacement of sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 122 | Supply and fixing in replacement of modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed. |
| 123 | S&F in repair MCB, single pole C, 240 Volts, 06 to 32 Amps,10Ka complete all as specified and directed. |
| 124 | S&F in repair MCB, single pole & neutral C, 240 Volts, 40 to 63 Amps,10Ka complete all as specified and directed. |
| 125 | S&F in repair MCB Three Pole & Neutral C, 415 Volts, 63-100 Amps,10Ka complete all as specified and directed. |
| 126 | S&F sub main wiring with two single core PVC FRLS insulated multistranded copper conductor of size 4.0 sqmm nominal cross sectional area and one run of 4.0 sqmm nominal cross sectional area PVC FRLS insulated multistranded copper conductor green colour as continuous earth wire drawn in and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour, complete with all conduit accessories such as bends, tees, junction boxes, inspection boxes, saddles/clamps etc including cutting chases, making good disturbed surfaces to match existing finish complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire. |
| 127 | S&F sub main wiring with two single core PVC FRLS insulated multistranded copper conductor of size 10.0 sqmm nominal cross sectional area and one run of 10.0 sqmm nominal cross sectional area PVC FRLS insulated multistranded copper conductor green colour as continuous earth wire drawn in and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour, complete with all conduit accessories such as bends, tees, junction boxes, inspection boxes, saddles/clamps etc including cutting chases, making good disturbed surfaces to match existing finish complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire. |
| 128 | S&F sub main wiring with Four single core (Three Phase & Neutral) PVC FRLS insulated multistranded copper conductor (Red, Yellow, Blue, Black in colour) of size 16.0 sqmm nominal cross sectional area and one run of 16.0 sqmm nominal cross sectional area PVC FRLS insulated multistranded copper conductor green colour as continuous earth wire drawn in and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour, complete with all conduit accessories such as bends, tees, junction boxes, inspection boxes, saddles/clamps etc including cutting chases, making good disturbed surfaces to match existing finish complete all as specified and directed.NOTE:- One unit length shall measured as Four run of main wire and one run of conduit & earth wire. |
| 129 | Opening/ taking down electrical board/ fittings/ fixtures excluding light fittings to identify complaint pertains to internal electrification of any type and nature in Md Accn buildings and rectifying the same like of faulty electric circuits, No light in Md Accn, tightening of loose wiring/ conduits, replacement of defective switch, socket, bell push, lamp holder, fan regulator, copper wire of different sizes, LED bulb, replacement of broken hylam boards, call bell etc complete all as specified and directed.NOTES: (i) Cost of minor stores such as screws, clamps, insulation tapes, nuts/bolts etc shall be deemed included in the above quoted item.(ii) Spares such as switch, socket, bell push, lamp holder, fan regulator, copper wire, LED bulb, hylem sheet, call bell shall be paid seperately under respective items as supply only. |
| 130 | Supply only in replacement of switch piano flush button single pole one way 6 Amp 240 volt complete all as specified and directed. |
| 131 | Supply only in replacement of switch piano flush button single pole two way 6 Amp 240 volt complete all as specified and directed. |
| 132 | Supply only in replacement of switch piano flush button single pole one way 16 Amp 240 volt 2 hole/4 hole complete all as specified and directed. |
| 133 | Supply only in replacement of socket outlet flush type multipurpose 2 in 1, 3 pin 6 and 16 Amp, 230 volts 2 hole/4 complete all as specified and directed. |
| 134 | Supply only in replacement of socket outlet flush type 3 pin 6.Amp, 230 volts complete all as specified and directed. |
| 135 | Supply only in replacement of switch socket outlet combination flush type multipurpose 2 in 1, 3 pin 6 and 16 Amp, 230 volts 2 hole/4 complete all as specified and directed. |
| 136 | Supply only in replacement angle type lamp holder PVC/ Polycarbonate type with back plate complete all as specified and directed. |
| 137 | Supply only in replacement Ceiling rose surface bakelite three terminal complete all as per specified and directed. |
| 138 | Supply only in replacement for 1.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts gradecomplete all as specified and directed. |
| 139 | Supply only in replacement for 2.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed. |
| 140 | Supply only in replacement for 4 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed. |
| 141 | Supply only in replacement 3mm thick laminated hylum sheet top cover of size 10\\"x12\\" including cutting for fixing of switch, socket etc. complete all as specified and directed. |
| 142 | Supply only in replacement 3mm thick laminated hylum sheet top cover of size 8\\"x10\\" including cutting for fixing of switch, socket etc. complete all as specified and directed. |
| 143 | Supply only in replacement 3mm thick laminated hylum sheet top cover of size 8\\"x5\\" including cutting for fixing of switch, socket etc. complete all as specified and directed. |
| 144 | S&F in repair Rotary step up Switch/Socket type as per site requirement electronic fan regulator flush type suitable for 230V, 50 Hz AC supply, including making necessary connections complete all as specified and directed. |
| 145 | M&L for flexible multi stranded copper wire twin twisted two core of size 0.75sqmm complete all as specified and directed. |
| 146 | S&F in replacement of Capacitor 2.5 Mfd, 230 Volt, 50Hz of ISI marked approved make complete all as specified and directed. |
| 147 | S&F in replacement down rod 1.5 to 2 Feet long made out of 15mm bore GI tubing, medium grade, with both side hole/slot for fixing of ceiling fan complete all as specified as directed. |
| 148 | M&L for making opening of holes circular/square shape in brick wall, Size of 200 to 300 mm thick built in cement mortar and making good surface with cement mortar 1:3 including all necessary nuts, bolts, washers etc complete all as specified and as directed. |
| 149 | S&F in replacement BLDC ceiling fan 1200 mm sweep with 100 % Copper winding silent BLDC motor with Remote control, Powder coated Rust Proof Body & Blades, Min air delivery 210 CMM, Power consumption 26 - 28 watt, BEE 5 Star rating, White in colour with down rod as per site requirement alongwith connected accessories incl provn of connection with three core flexible copper wire from ceiling rose to fan, Min 2 years procuct warranty and 05 years motor warranty complete all as specified and directed. |
| 150 | S&F in replacement Heavy Duty Metal body exhaust fan with 300 mm Sweep, 12 Inch, 1320 RPM with high air delivery 1710 CMH, Super enamelled Copper winding Motor protected with Min. Power consumption, Epoxy Powder coating to resist corrosion, Pre-lubricated double ball bearing for maintenance free running with 4 Nos blades, Single phase AC, 230/240 Volt, including suitable metal louvers and making connection with three core flexible copper wire from ceiling rose to fan, Min 2 years procuct warranty complete all as specified and directed. |
| 151 | S&F in replacement Heavy Duty Metal body exhaust fan with 380 mm Sweep, 15 Inch, 14000 RPM with air delivery, Super enamelled Copper winding Motor with Min. Power consumption, Powder coated Rust Proof Body & Blades, Metallic Grey in colour, 4 Nos blades and Double Ball Bearing, Single phase AC, 230/240 Volt, including suitable louvers and making connection with three core flexible copper wire ceiling rose to fan, Min 2 years procuct warranty complete all as specified and directed. |
| 152 | S&F in replacement Wall mounted swing fan with copper winding, White in colour, Single phase AC 230 Volt heavy duty of size 400 mm sweep, speed 1350 RPM with Air Delivery 65-90 CMM, Min. Power consumtion with 60-90 degree oscillation with pull chain control with product warranty 2 years and making connection with three core PVC insulated and sheathed copper conductor flexible cable complete all as specified and directed. |
| 153 | S&F in replacement of PVC body exhaust fan, 250mm sweep, 1270 RPM with air delivery 780 CMH, Super enamelled Copper winding Motor with Min. Power consumption, Single phase AC 230V, 50 Hz, White in colour complete with louvers shutter and making connection with three core flexible copper wire from ceiling rose to fan, Min 2 years procuct warranty complete all as specified and directed. |
| 154 | S&F in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 Way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete and comprising of the following:- (a) MCCB 100-125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 10 to 32 Amp, \\"C\\" curve, 10 KA breaking capacity - 12 Nos complete all as specified and directed. |
| 155 | Supply and fixing in replacement of MCCB current rating 125 Amps with thermal magnetic release, 4 pole, 415 volts AC 16 KA Ics = 50% Icu as per IEC 60947-2ruputuring capacity all as specified and directed. |
| 156 | S & F in replacement of three core PVC insulated FRLSH sheathed cable with 1.5 sqmm stranded copper conductor complete all as specified and as directed. |
| 157 | S & F in replacement of three core PVC insulated FRLSH sheathed cable with 2.5 sqmm stranded copper conductor complete all as specified and as directed. |
| 158 | S&F in replacement PVC gang box fitted with and including piano type switch 6 A and socket 6 A, 230 Volts complete with pvc gitties and screws all as specified and as directed. |
| 159 | S&F in replacement PVC gang box fitted with and including piano type switch 16 A and socket 16 A, 230 Volts complete with pvc gitties and screws all as specified and as directed. |
| 160 | S&F the insulation tape 25 Mtr complete all as specified and directed |
| 161 | S&F in replacement 1100 V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection ,one twin core cable flat or circular strande 10 sqmm aluminiuam conductor complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender