Tender For special Repair To Bldg No Tfb-05 And Tfb-06 And Provn Of Trg Shed At Demo Bty, Provn Of 02 X 30 Persons User Soak Well / Septic Tanks At Eme Bn And Provn Of Plain Cement Concrete Pathway With Interlocking Tiles Near Bldg No Eb-98, Ts-02, T
Tender Value
45.23 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
18 days left
EMD
90500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No Tfb-05 And Tfb-06 And Provn Of Trg Shed At Demo Bty, Provn Of 02 X 30 Persons User Soak Well / Septic Tanks At Eme Bn And Provn Of Plain Cement Concrete Pathway With Interlocking Tiles Near Bldg No Eb-98, Ts-02, Ts-15 And Eb-57 Under Ge (Awc) Mhow
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling PVC water tanks Exc 250 ltrs but not 500 ltrs including taking down of float valve and removing from site complete all as specifed and directed. |
| 2 | S&F 1000 Ltrs capacity double layer (ISI marked) rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed. |
| 3 | S&F in repair ball valve/float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimum weight 210 gm etc complete all as specified and directed. |
| 4 | Taking up or down existing steel tubing and connection complete for following sizes:- |
| 5 | 15 mm dia |
| 6 | 20 mm dia |
| 7 | Supplying, fixing, jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete for the following sizes: - |
| 8 | 15mm dia bore |
| 9 | 20 mm dia bore |
| 10 | Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 11 | M&L non skid/mat finish ceramic coloured tiles 7 to 8 mm thick(square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm (Colour and design of tiles as approved by GE), in floors etc, and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 12 | M&L glazed ceramic coloured tiles size 300mm x 450 mm x 6-7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 13 | M & L for vitrified ceramic tiles 8 to9 mm thick light shade (square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed. |
| 14 | M & L 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate including finishing surface of concrete topping even and rough complete as in levelling work etc complete all as specified and directed. |
| 15 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 16 | M&L Granite 20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on sill of parapet wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown as per direction of GE |
| 17 | M & L 22 - 25 mm thick machine cut Kota stone slab in flooring or treads single piece of steps over and including 15mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above. |
| 18 | Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete. |
| 19 | Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter from the frame ) |
| 20 | S & F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fasts etc, complete all as specified and directed |
| 21 | S & F 105 x 60 mm size Pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate, hold fasts etc, complete as specified |
| 22 | M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in bed blocks, coping, for fixing holdfast/lugs,filling hollow space of pressed steel door frame etc including necessary form work all complete as specified and as directed. |
| 23 | M & L 2nd class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed. |
| 24 | S & F 2 nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item. |
| 25 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specifed and directed. |
| 26 | S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2020 |
| 27 | S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specifed and directed. |
| 28 | S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete all as specifed and directed. |
| 29 | S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete all as specifed and directed. |
| 30 | S & F 150 mm size aluminium handles cast type, anodised ISI marked complete all as specifed and directed. |
| 31 | S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specifed and directed. |
| 32 | S & F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete all as specifed and directed. |
| 33 | S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed. |
| 34 | S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper part shall be three movable shutter and lower part consisting of three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jambs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min)(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min)(iv) 4 mm thick glass superior quality.(Min)(v) IDPE Rubber gasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos.(Min)(vii) Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix) fixing screw for frame with wall per windows- 08 Nos. |
| 35 | S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two portions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jambs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 36 | M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 37 | M & L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 38 | M & L Preparation of New wood or previously untreated surfaces of any description , not otherwise described, over 10 cm width or girth apply two coat of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 39 | S & F in repairs Galvnised mild steel wire cloth, 0.56mm conforming to IS nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed. |
| 40 | Demolition of Brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed |
| 41 | M&L Brick work with fly ash brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed |
| 42 | M&L for rendering in cement mortar (1:6) 10mm thick first coat on fair faces of brick walls or concrete surfacesand in cm 1:4 5mm thick second coat over first coat , mixed with water proofing compound as per manufacturer instructions, finishe fair and even without using extra cement all complete as specified and as directed incl taking down existing plaster. |
| 43 | Supply only Integral water proofing compound |
| 44 | M&L for rendering 10mm thick plastering in CM (1:6) finished even & fair all as specified incl taking down plaster. |
| 45 | Complete removal of old treatment on internal surfaces of wall by scrapping , and washing etc all as specified. |
| 46 | M&L for applying 1 mm Avg thick wall care putty on wall on internal old/new wall surfaces as per manufacturer's instructions complete all as specified and as directed |
| 47 | M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all as specified and directed. |
| 48 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level. |
| 49 | M&L for PCC 1:3:6 type C2 using 40mm graded aggregate 75mm thick as in plinth protection, finishing concrete surfaces even and smooth without using extra cement complete all as specified and as directed |
| 50 | S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed. |
| 51 | S & F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete.Note :- Pillar tap shall be measured as supply only under respective item |
| 52 | S& F in repairs of sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 60mm wide with chromium plated bracket guard and railing 500mm long complete all as specified & directed. |
| 53 | Supply only10 Ltr capacity,PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with and including 32 mm dia PVC flush pipe complete all as specified and directed. |
| 54 | Supply only PVC connection pipe 15 mm dia 450 long with PTMT nut at both ends complete. |
| 55 | S&F in repair 600mmx450mm mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed at site. |
| 56 | S & F (in repair) brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete. Make : Plumber Cat No FLP-0507/Prayag Cat Part No 7810/ Jaquar Cat Part No CQT-23059 complete all as specified . |
| 57 | S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete. Make : Plumber Cat part No U-0911/Prayag Cat Part No BA-10/Jaquar Cat Part No AQN-7711 complete all as specified and directed. |
| 58 | S & F in repair over head shower with arm & flange of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe for required length or union Make: Plumber Cat part No.ITP-2401/Prayag BOS-90 Cat Part No SHP-524/Jaquar Cat Part No OHS 1989 complete all as specified and directed |
| 59 | S&F in repair 15 mm dia consealed type stop valves, cast copper alloy, chromium plated, screwed down, high pressure with handle, screwed both ends for iron pipe or union complete all as specified and directed |
| 60 | S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type long body , screwed down high pressure complete all as specified. |
| 61 | S&F in repairs 15mm dia brass chro-mium plated pillar tap with fly nuts capstan head screwed down high pressure with or without lettered hot or cold with long screwed shank complete all as specified and directed.. |
| 62 | S&F 15mm dia Bib tap chromium plated with crutch or butterfly handle sorewed down screwed for iron pipe or for brass ferrule and fixedcomplete.. Make : Plumber Cat part No FLP-0203 /Prayag- PIS-08, Jaquar Cat No CON-107KN complete all as specified and directed. |
| 63 | S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed |
| 64 | S & F in repair PVC bath cabinet box mirror type with shutter complete all as specified and directed. |
| 65 | S&F harrison rail/curtain rod, mild steel chromium plated with fixing bracket, stops and complete fitment all as specified and as directed. |
| 66 | S & F in repair corner shelf of 300 mm size with ABS brackets complete. Make : Prayag Cat No - BEA - 52 or equiilent of Jaquare CAT NO - CAN-1173/Plumber CAT NO- U-0921 complete all as directed and specified. |
| 67 | S & F in repair CP Thumbler Holder, complete all as specified and directed by Engineer-incharge. MAKE:- Plumber Cat Part No. U-0914/ Prayag Cat Part No BA-16/ Jaquar cat Part No-AQN-7741 |
| 68 | S & F in repair Gun-metal, globe of gate valve /flush cock of 20mm bore with iron wheel head, screwed both ends for iron pipe etc all as specified. |
| 69 | S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete all as specified and directed. |
| 70 | S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed. |
| 71 | S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed. |
| 72 | S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed. |
| 73 | S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 74 | S & F in repair 110 mm dia bore PVC (SWR) bends with access door any radius with solvent rubber ring joints, fixed complete all as specified and directed. |
| 75 | S & F in repair 75mm dia bore PVC (SWR) bends with access door any radius with solvent rubber ring joints, fixed complete all as specified and directed. |
| 76 | S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed. |
| 77 | S & F in repair 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed. |
| 78 | S & F in repair 110 mm dia bore PVC (SWR) vent cowl rubber ring joints, fixed complete all as specified and directed. |
| 79 | Demolition of reinforced cement concrete of any description for manhole cover, slab of septic tank & soak well etc complete all as specified and directed. |
| 80 | M & L providing pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces including chamfered weathering, throating etc including necessary use and waste of form work complete all as specified and directed. |
| 81 | S & F mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 82 | M & L for Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed |
| 83 | M & L PCC 1:4:8 type D-2 using 100 mm graded stone aggregate as in mass concrete complete all as specified and directed. |
| 84 | M & L 60 mm thick Machine pressed precast concrete interlocking paver blockfixing with grey cement and pigments OF \\" I \\" shape or as approved by GE ,and any colour and size conforming to IS 15658-2006 of M-35 Grade set , laid over 50 mm (average) thick dust sand cushioning,filling of joints with sand & compaction using surface vibrator after filling of joints laid in any pattern as decided by Engineer-In-Charge including packing of sides by cement concrete finishing surface even and smooth complete all as specified and as directed. Note : Sand cushioning shall be measured and paid separately . |
| 85 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 86 | Treating the soil under the plinth protection at the rate of 5 litre of emulsion per square metre of surface area.complete all as directed and specified. |
| 87 | S & F Pre-painted galvalume aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yield strength, it shall be coated with hot dip alloy of 55% aluminium, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and directed. |
| 88 | M&L for preparation old decorated surface of wall/ceiling to be done by mechanical means/smart painting technique coats of acrylic latex base exterior grade (100% ACRYLIC) over a coat of primer at any height including necessary scaffolding complete alongwith five year warranty complete all as specified and directed (Make:- Asian Paints Apex/ Dulux Weather Shield or equvalent make as approved by GE. Note:- Painting work shall be executed through authorized and certified applicator of paint manufactures of paint companies. 2. Approval shall be obtained from GE for make/manufacturers and applicator before engagement in the work. 3. Contractor shall provide five year written guarantee certicate for the paint work. |
| 89 | M & L cutting chases in brick wall for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete. |
| 90 | M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat complete all as specified and as directed. |
| 91 | S&F in repairs of health faucet with S.S. flexible pipe of 1.00 metre length including holder complete all as specified and as directed.Make: Essco series of Jaquar or equivalent series in other makes. |
| 92 | S&F in repairs of fancy type chromium plated two way bib cock of 15mm bore ,screwed for iron pipe or brass ferrule etc complete all as specified and as directed.Make: Essco series of Jaquar or equivalent series in other makes. |
| 93 | S&F in repair stainless steel kitchen plate rack made out of 1mm thick stainless steel of size 900 x 600 mm of best quality of approved make, complete all as specified and as directed. |
| 94 | M&L 600x600x4 mm thick HPSC oceanic pre primed self embossed textured designer board water , termite and fire resistant as in ceiling or wall panelling fixed with screws as per manufracturer's instructionsincluding dismantling complete all as specified. |
| 95 | S&F 605X605mm Anodised aluminium snap grid frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified & directed. |
| 96 | S & F in repairs Vitreous china wash down water closet pan (pedestal pattern), white including pedestal pan and trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. |
| 97 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & n exc 1.5 m in depth and getting out in soft /loose soil. |
| 98 | M & L Plain Cement Concrete type C-2, 1:3:6 (using 40 mm graded stone agg) in foundations, columns, pillars, boundary pillars and posts concrete complete all as specified and directed. |
| 99 | S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick AZ-150 of an colour having tensile strength of 550 MPa as in roof covering/cladding to wall/valley gutter of any size, fixed with self tapping screws Complete all as specified and directed. |
| 100 | Removing excavated material to distance exc 250 m but n. exc 500 and depositing where directed at a level n exc 1.5 m above the starting point of soils. |
| 101 | M&L 5 mm MS plates (plain or chqequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250 quality A)complete all as directed. |
| 102 | S&F PVC ( SWR ) waste pipe pipe of 110 mm dia bore in any length ,double socketed with rubber ring joints fixed to walls & Floor with necessary MS fixtures all as directed |
| 103 | M&L for Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome |
| 104 | Excavation over areas in any type of soil, n exc 1.5 m deep and getting out in hard and dense soil complete all as specified and directed. |
| 105 | Description all as per ser item No. 100.00 above but exc 1.50 m deep but n exc 3 m deep and getting out in hard and dense soil complete all as specified and directed. |
| 106 | M & L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete. |
| 107 | M & L for Hardcore of gauge 100 mm thick using broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 108 | M & L PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specifed and directed. |
| 109 | M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed. |
| 110 | M & L for Brickwork with fly ash bricks in one brick thick honeycomb walling, built in Cm 1:4 complete all as specified and directed. |
| 111 | M & L for Loose filling with brick bats broken of gauge 40 to 80 mm soakage pits, soakage wells complete all as specified and directed. |
| 112 | M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 113 | M & L for Formwork to edges of concrete Slabs exc 5 cm but n exc 10 cm wide for fair finished surfaces complete all as specified and directed. |
| 114 | M & L for reinforcement of TMT bars 6 mm to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 115 | M & L for RCC M-25 grade as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 116 | M & L for rendering 15 mm thick in CM 1:3 Screed bed or bedding layer for laying floor finishes complete all as specified and directed. |
| 117 | M & L for rendering 15 mm in CM 1:3 on wall incl finished even & Smooth using WPC complete all as specified and directed. |
| 118 | M & L for formwork to beams for fair finished surfaces (baffle wall) complete all as specified and directed. |
| 119 | M & L for RCC M-25 grade as in beams (baffle wall) complete all as specified and directed. |
| 120 | M & L for rendering 20 mm thick in CM 1:4 as bearing plaster complete all as specified and directed. |
| 121 | M & L for providing cement concrete 1 : 2 :4 type B1, using 20 mm graded stone aggregate as in bed block and copings, and the like including weathering, slightly rounded or chamfered angles and throating, with necessary form work as required & all as directed. |
| 122 | S & F of Man hole cover 450 mm x 450 mm (exc 5Kg) Cast iron work grade FG 150 complete all as specified and directed. |
| 123 | Returning, filling in, excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm in any type of soil complete all as specified and directed. |
| 124 | S & F of Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 125 | M & L for two coats of anti corrosive paint on steel surfaces complete all as specified and directed. |
| 126 | Surface excavation n.exc.30cm deep and averaging 7.5cm deep & getting out in any type of soil complete all as specified and directed. |
| 127 | M&L for morum filling/redbajri filling under floors or in foundations including watering &consoldation laid in layers n.exc 15 cm thick spread levelled and well rammed all as directed by Engr-in-Charge |
| 128 | M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 129 | M&L for 20 mm thick screed bed or bedding layer with CM 1:4 as in base for laying chequered tiles complete all as specified and directed. |
| 130 | Material and labour Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade conforming to IS 15658-2006 with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 131 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed at site. |
| 132 | Taking down ceiling fan/ exhaust fan/ wall fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed. |
| 133 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 134 | Taking down old/unserviceable distribution board by disconnecting of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 135 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 136 | One light point controlled by one, one way switch 5 Amps |
| 137 | One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 138 | One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 139 | One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 140 | Description all as per item No 131.00 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 141 | S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 142 | S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 143 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 144 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 145 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 146 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified |
| 147 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 148 | S & F for Box type (decorative) wall mounted LED light fitting including LED tube 4' x 20 watts with output of 2000 lumens, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 149 | S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. |
| 150 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 151 | S & F for LED luminaire 600 mm x 600 mm square LED panel 35/36 watts, 220 volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-charge. |
| 152 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 153 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 154 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 155 | S & F for ceiling fan, 230 Volts, 50Hz, 1200 mm sweep with down rod, canopy, blades, BLDC motor etc and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan terminal including writting the MES Number with synthetic enamel paint complete all as specified and as directed. |
| 156 | M&L for wall fans 450 mm sweep, 230 volts, 50 Hz complete with mounting brackets all as specified and directed |
| 157 | S & F PVC exhaust fan 200mm sweep complete all as specified and directed. |
| 158 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 159 | Supply and fix electric water heater storage type Aluminum/ steel body with copper/stainless steel inner tank and heading element upto 2 KW capacity 25 ltrs BEE 5 star rated complete with all necessary accessories such as safety valve, thermostat, NRV, connection pipe etc. including taking down of old geyser and deposit to MES store yard. |
| 160 | S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system, IP 43, IK 09 protection including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. |
| 161 | S&F in repairs 20 W LED batten 4 feet long, wall mounted, with integrated electronic driver, ISI marked complete all as specified and directed. |
| 162 | Supplying, testing and laying of XLPE armoured insulated, screened, pvc bedded UG cable 1100 volts grade of size 10 sqmm 2 core all as specified and directed. |
| 163 | M&L fine sand cushioning for cable protection in layers incl punning all as specified and directed.Note : Punned down thickness shall only be measured. |
| 164 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm all as specified and as directed. |
| 165 | S & F tubes, 'light grade,galvanised, with all fitting of size 40 mm laid in trenches for cable protection all as specified and directed. |
| 166 | Removing excavated soil to a distance not exc 50 m and depositing where directed at a level not exc1.5m above the starting point all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender