Tender For Repair To Chajja, Facias Roof Treatment And Allied Work At Zone-I(A) Area Under Age B/R-Iv Of Ge (S) Jaipur
Tender Value
15 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
17 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Chajja, Facias Roof Treatment And Allied Work At Zone-I(A) Area Under Age B/R-Iv Of Ge (S) Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ 82590/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: REPAIR TO CHAJJA, FACIAS ROOF TREATMENT AND ALLIED WORK AT ZONE-I(A) AREA UNDER AGE B/R-IV OF GE (S) JAIPUR CA NO: CWE/JPR(S)- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 3 | M&L for Removing old lime wash (if any), hacking for key, raking out joints of old brick work or stone work built in cement mortar; not previously plastered; and scrubbing down with water etc. to receive plaster upto two storey bldg including scaffolding complete all as specified and as directed. |
| 4 | M&L for rendering on fair faces of brick work or concrete surface of wall 15 mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed Note (WPC will be used in plaster and paid separately) |
| 5 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 6 | M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior acrylic emulsion paint over a coat of primer including 1 mm thick external wall putty and scaffolding upto three storey building complete all as specified and as directed. |
| 7 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 8 | M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 9 | Demolition of reinforced cement concrete (reinforce-ment cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for and removing debris outside MD land complete all as directed by Engr-in-charge. |
| 10 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; making bracket with angles railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including necessary welding complete all as specified and as directed. |
| 11 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet0.50mm thick of any colour having tensile strength of 550 Mpa as inroof covering/cladding to wall, fixed with self tapping screws as specified |
| 12 | S&F Rotational moulded polyethylene 1000 ltrs water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old unserviceable water tanks and removing to store complete all as specified and as directed. |
| 13 | S & F in repairs 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 14 | S & F steel water tubes, 20mm diameter medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors including taking down steel tubing and connections complete all as specified and as directed. |
| 15 | M & L for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces after applying anticorrosive paint over cleaned rusted steel surface including demolition old RCC surfaces (chajjas, fins, beams , borders etc and applying polymer modified mortar in CM 1:3 including mixing of polymer latex additives upto 60mm thickness (Chajjas fins, border etc) (i) cleaning of rusted part of steel and applying anticorrosive paint over it (ii)Qty of ploymer to be used 15% by weight of the cement or as per manufacturer instruction (iii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iv) To achieve required thickness repeat this step after 24 hrs as required.(v) Keep the surfaces moist using water fog for 5 to 7 days etc complete all as specified and as directed. (vi) Rate shall be inclusive of all necessary scaffolding for building of height upto two storey complete all as specified and directed by Engineer-in-Charge. Make : - Epoxy bonding agent shall be Krishna, Dr Fixit, MC Bauchemie and M/s Cemistik, Sika or Equivalent as directed by Engineer-in-Charge |
| 16 | M&L for preparation of newly palster surface of wall and applying 1mm thick putty in two coats to make the entire surface free from undulations and finally applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 17 | M&L for preparation of newly palster surface of ceiling and applying 1mm thick putty in two coats to make the entire surface free from undulations and finally applying two coats of oil bound distemper over a coat of primer complete all as specified and directed |
| 18 | M&L for old decorated plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed. |
| 19 | M&L for preparation of old decorated plastered/unplastered surface of ceiling by brooming down, scraping including cornice pillers etc and applying one coats of oil bound distemper complete all as specified and as directed. |
| 20 | Demolition of PCC of any description or in any position as in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as directed by Engineer-in-charge. |
| 21 | Providing cement concrete 1:2:4 type B1 (20mm graded agg) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, ier aps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces,E28 including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and as directed Engineer-in-Charge |
| 22 | M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop including WPC complete all as specified and as directed. |
| 23 | Water Proof treatment to RCC Roof comprises the following complete all as specified and as directed by Engr-in-Charge :- (a) Applying High build elastomeric waterproofing coating based on aliphatic polyurethane, cold applied with spray/brush applicatiion, membrane with an elongation of 350% and crack bridging abillity of 2mm as per ASTM D 412. The system including final base preparation, single coat of single component PU based primer and applying waterproofing coating in two coats to achieve a min thickness 1.2mm etc complete all as per manufacturer specification. (b) Necessary gurantee for 10 years shall be submitted by the contractor. |
| 24 | M&L for drilling suitable holes in reinforced cement concrete with power driven drill machine to a minimum depth of 10D (D-Dia of Bar in mm) in RCC beams, lintels, columns and slabs to introduce new steel bars including fixing the steel bars in position using Lokfix E77 a two-component epoxy anchoring material, supplied in 3:1 ratio having compressive Strength (EN196) >122 N/mm2, Flexural Strength (EN196) >66 N/mm2, E Modulus (EN ISO 527-2) 6300 N/mm2. or of equivalent make but excluding the cost of reinforcement but includes welding wherever required, complete all as per direction of Engineer-In- Charge. Anchoring chemical shall comply with ETA 21/0354, ETA 21/0518. a) Anchoring bars for 10mm Dia |
| 25 | S&F MS TMT bars 10mm dia and over cut to length bent to shape reqd incl cranking, bending spirally for hooping for cols, hooking ends and binding with steel MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. |
| 26 | S&F Welded steel wire fabric not exc 4 Kgs/ Sqm over RCC slab, overhang portion, chajjas etc and the mesh must be tightly fastened against the concrete to prevent sagging or buldging using mechanical anchors spaced at regular intervals complete all as specified and as directed |
| 27 | Schedule of Credit Total in Figures 0.0 0.0 -10450.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus Ten Thousand Four Hundred & Fifty Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender