Tender For Repair To Joinery And Allied Works In N-5/N-6 Area At Afs Chakeri Kanpur
Tender Value
44.99 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
10 days left
EMD
89980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery And Allied Works In N-5/N-6 Area At Afs Chakeri Kanpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutter not exc 1.5 sqm each but with shutters (without taking off shutters from the frame), complete all as specfied and directed |
| 2 | All as per item No 1 but exc 1.5 sqm but n.exec 4sqm each. |
| 3 | Taking down shutters of any description exc 1 sqm but n.exec 2 sqm each complete all as specfied and directed |
| 4 | All as per item No 3 but exec 2 sqm each complete all as specfied and directed |
| 5 | M&L for pressed steel window CRCA frame using profile 80x40x1.25mm thick & openable outside glass pane shutter & openable inside wirmesh shutter included guard bare of 12 mm MS square frame complete with fixture & fitting such as box type hinges, peg stays glazing clips and handle, locking arrangement complete all as specfied and directed Note:- 3 mm thick glass pane, SS wiremesh & guard bar/Grill & PCC for pressed steel frame included in above rates. |
| 6 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specfied and directed |
| 7 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed. |
| 8 | S&F 30 mm thick plain WPC factory made wire mess solid door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company.The door to be pannened with SS mosquito mesh and XTN alluminium mesh for additional strength and safty purpose. door should be fixed with SS hinges and SS screw. door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as manufacturer's specification & drawings & as directed by Engr -in -charge. |
| 9 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 600 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary SS screws shall be paid separately) complete all as specfied and directed |
| 10 | Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specfied and directed |
| 11 | Supply and fixing powder coated aluminium grill to windows/ventilators including aluminium 'F' Channel 20 x 20 x 2 mm mm thick, fixed all round of grill as directed : Make : Deco Cat Part No 104 or Equivalent complete all as specfied and directed |
| 12 | S&F for 1.25 mm thick pressed steel frames for doors with one/more rebated incl necessary fixing lugs hinges lock strike plate etc complete of size 125x60mm complete all as specfied and directed |
| 13 | S&F 35 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides including both faces covered with decorative face veneer with lipping / frame to match complete all as specfied and directed |
| 14 | M&L for PCC (1:2:4) type B1 (using 20mm graded agg) for hold fasts and for filling in as door frame finished to match with the sorrounding surfaces including necessary form work complete all as specified and as directed. |
| 15 | S&F Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing complete all as specfied and directed |
| 16 | S&F Factory Made Solid PVC Moulded Door Shutter,28 to 30 mm thick 'Stiles' with 2, 4, or 6 raised panel design with 2 mm thick Moulded Prelam PVC sheet on the front face and 2 mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specfied and directed |
| 17 | S&F in repair 150 mm Aluminium anodised, barrel tower bolts of extruded section complete all as specfied and directed |
| 18 | S&F in 150 mm Aluminium anodised, barrel tower bolts of extruded section complete all as specfied and directed |
| 19 | S&F in repair 150 mm long aluminium handles , cast type, anodised complete all as specfied and directed |
| 20 | S&F 150 mm long aluminium handles , cast type, anodised complete all as specfied and directed |
| 21 | S&F in repair mild steel butt hinges , medium weight,cold rolled mild steel size of 100mm long .complete all as specifiedand directed complete all as specfied and directed |
| 22 | S&F in repair aluminium alloy, anodised 250 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specfied and directed |
| 23 | S&F aluminium alloy, anodised 250 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specfied and directed |
| 24 | S&F 100mm size butt hinges stainless steel of AISI 304 complete all as specified and directed. |
| 25 | Taking down easing and adjusting shutters of any description exec 1 sqm but n exc 2 sqm each refixing in same opening, complete all as specfied and directed |
| 26 | All as per items 25, here-in-before, but exc 2 sqm each refixing in same opening complete all as specfied and directed |
| 27 | S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed. |
| 28 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed. |
| 29 | Hacking out old broken glass (any thickness size quality or description) from any frame etc glazed with putty or fixed with beads, complete all as specfied and directed |
| 30 | M&L for sheet glass 3mm thick glass ground or obscured orfrosted, on one side glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as specified and as directed. |
| 31 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise sepcifically provied for including existing roof treatment (tarfelt) including removing to a distance exc 1.50 KM but not exc 5.00 KM complete all as specified and directed |
| 32 | Providing cement concrete type C1 1:3:6 (20 mm graded aggregate) in copings, plinth protection courses, string courses and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specfied and directed |
| 33 | S&F in repair mortice lock brass 4 levers vertical type, size 100mm, fixed in repairs complete all as specfied and directed |
| 34 | S&F in repair 150 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, fixed in repairs complete all as specfied and directed |
| 35 | Sypply and fixied in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specfied and directed |
| 36 | Sypply and fixied aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. |
| 37 | Supply and fixed in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheed, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specfied and directed Please Enable Macros to View BoQ information |
| 38 | Supply and fixed in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheed, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specfied and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender