Tender For Periodical Services And Allied Nature Of B/R Works To Various Buildings Of Various Labs At Kwc Under Ge (I) R&D Delhi.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
13 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services And Allied Nature Of B/R Works To Various Buildings Of Various Labs At Kwc Under Ge (I) R&D Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pilaster and cornices etc. including washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil emulsion distemper of approved shade/tint over and including one coat of 1 mm thick birla wall care putty to achieve smooth finish complete all as specified & directed. |
| 2 | M&L for preparation of old decorated surfaces of wall (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat distemper oil bound emulsion (white or tinted) on walls complete all as specified and directed. |
| 3 | M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls including pilasters and cornices etc. including washing, rubbing down and stopping the previously treated surfaces and applying two or more coats of Premium acrylic emulsion paint exterior grade over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over surfaces (tint and pattern as approved by GE) complete all as specified. Note:- This item includes use of necessary scafffolding, Jhulla arrangement and safety net up to G+5 storey building. |
| 4 | M&L complete removal of existing treatment on wall surfaces with sand paper, iron patti or grinder, incl pilasters and cornices etc.and applying two coat of interior acrylic emulsion paint over a coat of 1mm thick birla wall care putty to achieve smooth finish complete all as specified and directed. |
| 5 | M&L preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of tint / shade as approved complete all as specified and directed. |
| 6 | M&L for preparation of old painted steel or iron surfaces of any description and applying two coat of synthetic enamel paint of tint as approved complete all as specified and directed. |
| 7 | M&L preparing old painted concrete surfaces such as checquerd tiles, paver blocks, kerb stones etc and similar surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 8 | M&L preparation of old plastered outer wall surfaces and applying two coats of cement base paint complete all as specified and directed. |
| 9 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. |
| 10 | M&L for brick work straight or curved on plan exc 6m mean radius in CM (1:4) with Sub class ‘B’ brick including manhole raising, footpath, etc complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Taking down cement plaster/grit plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 12 | M&L 15mm thick rendering in CM (1:6) on fair faces of new or old brick works or concrete work finished even & smooth without using extra cement complete all as specified and directed. |
| 13 | M&L 15mm thick rendering in CM (1:4) on other than fair faces of new or old brick work or concrete work, finished even & smooth without using extra cement complete all as specified and directed. |
| 14 | M&L 5mm thick rendering in CM (1:3) on ceiling new or old brick works or concrete work finished even & smooth without using extra cement complete all as specified and directed. |
| 15 | M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer complete all as specified and directed. |
| 16 | M&L for preparation of newly plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces(tint and pattern as approved by GE) complete all as specified. Note:- This item includes use of necessary scaffolding, Jhulla arrangement and safety net up to G+5 storey building. |
| 17 | M&L preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper(white or tinted) over a coat of alkali resistant primer, complete all as specified and as directed. |
| 18 | M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4) (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster (1:1/2:2) (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including using white cement in place of grey cement for grit wash complete all as directed.Note:- This item includes use of necessary scaffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate complete all as specified and directed. |
| 19 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and directions of Engineer-in-charge.Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed by Engineer-in-Charge. |
| 22 | M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregates for sub bases of floor, mass concrete finished even and rough to receive topping layer completed all as specified and directed by Engineer-in-Charge. |
| 23 | M&L PCC (1:3:6) type C-2, using 40mm graded stone aggregate as in plinth protection 75mm thick laid in bays and surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 24 | M&L glazed ceramic tiles (300x450/ 300x600) x 7mm to 8mm thick coloured tiles in vertical surfaces, wall claddings, boundary wall dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match as in dado over 10 mm thick cement plaster in CM (1:4) complete all as specified and directed. |
| 25 | M&L non-skid, ceramic coloured tiles 7mm to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15mm thick average in CM (1:6) complete all as specified and directed. |
| 26 | M&L for Vitrified Ceramic light shade tiles 8mm to 9 mm thick polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry, over and including 15mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match complete all as specified & as directed. |
| 27 | S&F as in repair vitreous china squatting pan \\"Orissa\\" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed. |
| 28 | S&F in repairs vitreous china pedastal pattern, \\"EWC\\" white with connection to trap, and to flushing pipe anti-syphonage pipe and including sheet cover and CP jet etc. complete all as specified and directed. |
| 29 | S&F in repairs Vitreious China urinals, bowl type (back or corner wall type) of size 465mm x 355mm x 265mm, complete including providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. |
| 30 | S&F as in repair PVC valveless syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm diameter PVC bend for required square pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified and directed. |
| 31 | S&F as in repair vitreous china wash hand basin, white flat back, size 550mm x 400mm including pillar tap of chromium plated with capstan head with long screwed shanks and fly nuts, brass chromium plated waste coupling 32mm diameter, with fly nuts, PVC waste pipe and MS brackets 25mmx25mmx5mm thick including cutting for and pinning in ends of brackets, fixed as in repairs complete all as specified and directed. |
| 32 | S&F 15mm diameter PVC connection with brass nut, of length 450mm, fixed as in repairs, complete all as specified and directed. |
| 33 | S&F as in repairs 15mm bore pillar tap long neck,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure,with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 34 | S&F long body Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 35 | S&F angle stop valve, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 36 | S&F in repairs 15mm diameter stop valve concealed type cast copper alloy screwed down high pressure chromium plated with long shank including dismantling protion of the wall as required including making good to match with existing complete all as specified and directed. |
| 37 | S&L of CPVC pipes 25mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old pipes complete all as specified and directed. |
| 38 | Supplying and laying of CPVC pipes 20mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old pipes complete all as specified and directed. |
| 39 | Dismantling water tanks and removing from site of 500 litres capacity complete all as specified and directed. |
| 40 | Dismantling water tanks and removing from site of 1000 litres capacity complete all as specified and directed. |
| 41 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed |
| 42 | S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed |
| 43 | S&F as in repairs PVC lid / cover for PVC water tank 500 / 1000 litre capacity of make Sintex/ Polycon/ Fusion/ Sheetal) incl removing old broken lids complete all as specified and as directed. |
| 44 | S&F in repairs 32mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed. |
| 45 | S&F as in repairs CP Health faucet with 1.50m flexible chromium plated tube and hook fixed to angle valve 15mm bore with accessories complete all as specified and directed. |
| 46 | S&F in repair vertical venetian blinds consisting of Aluminium head rail with vanes/louvers 100mm wide of approved tint and travers coard complete fixed in position all as specified and directed by Engr-in-Charge. |
| 47 | S&F Double roller Zebra venetian blinds consisting of Mounting pelmet assembly, aluminium head rail with flip cover of approved tint/shade and traverse cord complete as per manufacturer instruction fixed in position complete all as specified and directed by Engr-in-Charge. |
| 48 | Cutting chases, pinning in making good to facings where required & pointing in CM (1:3) to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chases for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls complete all as specified and directed. |
| 49 | Disconnecting existing tanks, setting aside (or lowering if required ) for repairs, cleaning, etc.and hoisting if required reconnecting and refixing in position including cleaning and removing all scales and dirt from tanks and from mouths of circulating pipe etc for 250 ltr to 500 ltrs capacity of tanks complete all as specified and directed. |
| 50 | All as per Srl Item No 49 above but exceeding 500 ltrs and not exceeding 1000 ltrs complete all as specified and directed. |
| 51 | S&F 150 mm long aluminum anodized barrel tower bolt of extruded section all as specified and directed. |
| 52 | S&F 150mm size aluminum handles cast type, anodized all as specified and directed. |
| 53 | S&F 250mm long aluminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy all as specified and directed. |
| 54 | S&F anodised aluminium powder coating aluminium section weighing not less than 0.55Kg/m (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 55 | S&F anodised aluminium Powder coating door shutters aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, hinges, anodised aluminium snap beading screws, all necessary builders hardware etc complete all as specified and directed. |
| 56 | S&F anodised aluminium Powder coating window and ventilator shutters, side hung type without sash bars aluminium section weighing not less than 0.55Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1No), hinges type B-21 100mm long (2 No.) suitable handle (1 No) including all necessary builders hardare complete all as specified and directed. |
| 57 | S&F 12mm thick particle board exterior grade with decorative prelaminated both sides of approved shades fixed to aluminium shutters/ partitions complete all as specified and directed. |
| 58 | S&F 4.8mm thick sheet glass ordinary quality in Square/rectangle fixed with glazing pins and rubber beading etc in aluminium door/window/partitions etc complete all as specified and directed. |
| 59 | S&F in repair aluminium anodised fully glazed partly panelled partitions and fixed glazing made out of anodized aluminium section 63.50mm x 38.10mm x 1.60mm including necessary jointing cleats glazing clips, rubber packing anodised alum snap beading screws etc, frame work fixed to walls, floor and ceiling with rawl plug wherever required complete all as specified and directed by Engineer-in-Charge (Sheet glass and particle board shall be measured and paid for separately) Note : area of each panel shall not be exceeding 01 Sqm |
| 60 | S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 61 | S&F in repair 110 mm bore PVC (SWR) bends with rubber ring joints complete all as specified and directed. |
| 62 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, fixed as in repair complete all as specified and directed. |
| 63 | S&F 75mm diameter PVC (SWR) bends with rubber ring joints fixed as required complete all as specified and directed. |
| 64 | S&F in repair door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851mm to 1000mm in width and of weight between 61Kg to 80 kg and fixed complete all as specified and directed. |
| 65 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete complete all as specified and directed. |
| 66 | Demolition of reinforced cement concrete as in RCC slabs, beams, etc drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 67 | M&L for Precast RCC work (Nominal Mix) (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in slabs supported on walls, Manhole cover, Drain covers with perforated hole, Shelves etc and like complete all as specified and directed. |
| 68 | S&F of TMT bars 10mm diameter and over cut to length bend to shape required including cranking bending. |
| 69 | Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface flat for rough finished surface of concrete complete all as specified and directed. |
| 70 | Use & waste of form work to edge of concrete flats etc exceeding 10cm but not exceeding 20cm wide/thick for fair finished surface of concrete all as specified and directed. |
| 71 | S&F Factory made precast perforated heavy duty drain/ manhole covers including MS frame plate and including reinforcement as per IS 12592 : 2002 with size 1.00m x 0.50m x 75mm thickness complete all as specified and directed by Engineer-in-Charge. |
| 72 | Repairing of rolling shutter push type with necessary repair work of defective parts i.e, re posting of laths, riveting to old defective rivets, lightning nuts and bolts, replacement of spring, greasing to movable parts and at guide channel including taking out and re-fixing rolling shutter for smooth functioning size of rolling shutter not exceeding 6 Sqm each all as directed by Engineer-in-Charge. |
| 73 | S&F in repairs mild steel plain sheets covering to door shutter and top cover of rolling shutter cover cut to size, edges beaded, holes punched all as specified and directed. |
| 74 | Removing Debris/ demolished materials by mechanical means including loading, transporting, unloading to outside MoD land from 5Km upto 20Km lead at approved municipal dumping ground complete as per direction of Engineer-in-Charge. |
| 75 | S&F as in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed for 15 mm bore pipe, complete all as specified and directed. |
| 76 | S&F as in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed for 20 mm bore pipe, complete all as specified and directed. |
| 77 | S&F as in repair 15mm bore tubes \\"medium grade\\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 78 | Supply and fixing as in repair 20mm bore tubes \\"medium grade\\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 79 | S&F as in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed,screwed down, high pressure screwed ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 80 | Dismantling AC sheet/CGI sheet/PGI Sheet/tensile fabric sheet (corrugated, semi corrugated, etc) in roof covering complete all as specified and directed. |
| 81 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, cladding to wall, ridges etc. fixed all as per manufacturer's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified and directed by Engineer-in-Charge. |
| 82 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified and directed by Engineer-in-Charge. |
| 83 | Demolition of cement concrete in ground floors and pavings etc not exceeding 15cm thick above or below ground level complete all as specified and directed. |
| 84 | M&L for PCC (1:2:4) type B1(using 20mm graded aggregate) in lintels upto 1.5m clear span, sills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers apex stone, bed plates, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 85 | S&F factory made checqured cement concrete prepolished coloured tiles 300mm x 300mm x 25mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and including 20mm thick screed bed in CM (1:4), complete all as specified & directed. |
| 86 | M&L for 75mm thick cement concrete (1:4:8) type D-2 (40mm graded stone aggt) as in sub base concrete all as specified & directed. |
| 87 | M&L for Precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs of manholes, gully traps etc set in cement mortar (1:4)complete all as specified and directed. |
| 88 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed. |
| 89 | M&L for machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completed. Including 20mm thick screed bed or bedding lay in CM (1:6) complete all as specified and directed. |
| 90 | M&L machine cut Granite slab 15mm thick fixed as in repairs for steps, pillars, skirting/dado, window sills, cooking platforms and like and including 10mm thick (avg thickness) CM (1:4) screeding and setting coat in CM (1:2), 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polishing etc complete all as specified and directed.Note:- (i) The rate of granite stone shall be deemed to including for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achieve the desired granite finish all as specified and directed. |
| 91 | M&L 100 mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggregate) as in sub floors, filling and mass concrete etc complete all as specified and directed. |
| 92 | M & L for machine made Rubber moulded precast concrete interlocking paver block (coloured), pre polished of any shape and size with grey cement and pigment conforming to IS 15658-2006 of 60mm thickness M-35 Grade, over and including 25mm average thickness sand cushioning complete all as specified and directed. |
| 93 | Taking down and Adjusting / repairing of Aluminium door/windows shutters, for easy closing/opening lightning of hinges or changing the position of hinges, tightening of Glass/ Particle board by replacing rubber beading and clip packing, adjustments of floor machine for smooth opening and closing and refixing the same complete all as specified and directed. |
| 94 | Taking down and Adjusting / repairing of steel window shutters for smooth opening/closing including greasing, welding and adjustment of projecting type friction hinges in any position make fully functioning complete all as specified and directed. |
| 95 | S&F as in repair aluminium alloy body floor door stopper of size 75mm having double round legs for better grip, with rubber base fixed to door shutters with countersunk screws complete all as specified and directed. |
| 96 | S&F in repairs 250mm long aluminum alloy anodised sliding door bolt hasp and staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 97 | M&L securing glass of any description in existing steel frame with putty including removing of old putty complete all as specified and directed. |
| 98 | S&F in repairs extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed. |
| 99 | S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 100 | S&F in repair 100mm hinges MS Butt hinges medium weight cold rolled. complete all as specified and directed. |
| 101 | S&F in repair 75mm hinges MS Butt hinges medium weight cold rolled. complete all as specified and directed. |
| 102 | S&F in repair 100mm long aluminium handles, cast type anodised for aluminium windows complete all as specified and directed. |
| 103 | S&F in repairs stainless steel wire cloth 0.36mm nominal diameter of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed. |
| 104 | S&F in repair 4mm thick sheet glass in squares/rectangle in each pane fixed with wooden beads or putty (in metal/wooden frames etc) complete all as specified and directed. |
| 105 | S&F in repair 5.5mm thick sheet glass of any colour, ordinary quality and glazing with snap beading and gasket, neoprene packing etc for aluminium door and window exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 106 | Taking down and refixing of PVC door shutter (after taking down) loosened at joints of styles, by let in for making good and where hinges etc have been removed/loosened from chowkhats or frames and easing etc for complete functional complete all as specified and directed. |
| 107 | S&F in repair Mortice lock assembly vertical type with one set of lock Handles for fixing on both sides of wooden flush door, including 4 lever lock of required size complete all as specified and directed. |
| 108 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 109 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking GI metal grid of hot dipped galvanized steel sections consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture having 8 to 10 mm thick square edge PVC Laminated Gypsum board Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge |
| 110 | Dismantling wrought iron or mild steel work of any description not otherwise provided for work including doors, gates, angle post etc. complete all as specified and directed by engr-in-charge |
| 111 | S & F Framed work as in Mild Steel Gate of angle or other section with gusset plate, rails, braces, stair case, barreled iron doors,ladders; framed balusters; walk ways; railings; framework of water tanks, cover grills and similar work etc Fe.290.Gde-E-165 complete drilled for fixing of steel sheeting or other covering including welding work ,(PCC 1:1.5:3) etc to be prepared for hanging or sliding with and including either hooks,hinges,necessary holdfasts or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing in building upto 8 mtr height complete all as spfd and directed by engr in charge. |
| 112 | S&F Mild Steel work in tubular trusses with round/square tubular pipes as in rafters, purlins, columns etc for Shed work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge. |
| 113 | M&L translucent film frosted/colored/ plain sticked to glass panes as per instructions of manufacturers comlete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender