Tender For Repair Replacement Of Roof, Sanitary Fitting Plinth Protection Floor Wall Tiles Door/Window In Smq In Domestic Area At Afs Yelahanka.
Tender Value
28 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
19 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Replacement Of Roof, Sanitary Fitting Plinth Protection Floor Wall Tiles Door/Window In Smq In Domestic Area At Afs Yelahanka.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 3 | S&F steel work in tubular trusses including special shaped washer etc complete or butt welded tubes conforming to IS-1161-1979 graded St-240 all as specified and directed. |
| 4 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 5 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 7 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as directed and specified. |
| 8 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, laid in 1.50mm spacer and grouted with epoxy joint filling material set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as directed and specified. |
| 9 | M&L Glazed coloured Ceramic tiles of size 450x300X7mm thick set and jointed in neat cement slurry including matching PVC corner beading and pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished all as specified and directed. |
| 10 | M&L for Granite(of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 20mm thick screed bed in CM 1:6 all as specified and directed. |
| 11 | Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) all as specified and directed. |
| 12 | M&L 75 mm thick Plain Cement Concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and paving finishing surface even and smooth without using extra cement all as specified and directed. |
| 13 | Demolition of brick work or stone masonry built in CM including all quions all as specified and directed. |
| 14 | Taking down cement plaster from walls of any description all as specified and directed. |
| 15 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, 1:6 type C1 1:3:6 (20 mm graded stone aggregate) complete all as specified. |
| 16 | M&L 15 mm thick cement plaster in CM (1:6) including finished even and smooth (without using extra lime or cement) complete all as specified. |
| 17 | M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls complete all as specified. |
| 18 | M&L for applying two coats of distemper (OBD) over primer including Preparation to the new surfaces of wall, all as specified and as directed. |
| 19 | M&L for Preparation of newly plastered surfaces and applying two coats of cement base paint on walls including priming surfaces with alkali resistant priming paint etc complete all as specified and directed. |
| 20 | M&L for Complete removal of existing wall surface finish and applying two coat of oil bound distemper over primer all as specified and directed. |
| 21 | M&L for preparation of existing wall and applying one coat of oil bound distemper all as specified and directed. |
| 22 | M&L for Complete removal of existing surface finish and applying 1-2 mm thick wall care putty at wall and ceiling surfaces all as specified and directed. |
| 23 | M&L preparation of surface and applying two coat of White wash on old wall surface all as specified and directed. |
| 24 | M&L Preparing of old painted wooden surface and applying one coat of Synthetic enamel Paint all as specified and directed. |
| 25 | M&L Preparing old painted steel surface and applying one coat of Synthetic enamel Paint all as specified and directed. |
| 26 | M&L for one coat of exterior emulsion paint to old decorated surfaces of wall including preparation of surfaces complete all as specified and directed. |
| 27 | Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified and directed. |
| 28 | All as per item No 27 above but exceeding 1.5 sqm but not exceeding 4 sqm complete all as specified and directed. |
| 29 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm complete all as specified and directed. |
| 30 | Taking down shutters of any description exc 2.00 sqm each and refixing in the same opening after necessary easing and cutting complete all as specified and directed. |
| 31 | M&L Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0)( using 12.5 mm graded stone aggregate) depth of embedded portion of holdfast not exceeding half brick complete all as specified and directed. |
| 32 | S&F powder coated anodised aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed. |
| 33 | S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats and locking arrangement, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified. |
| 34 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed. |
| 35 | S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed. |
| 36 | S&F IInd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 37 | S&F Continuous(piano) hinges, mild steel, bright finish of electrogalvanised 30 mm width of flap complete all as specified and directed. |
| 38 | M&L in repairs Prelaminated particle board,19 mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 39 | M&L in repairs 12mm thick block boards grade 2 quality, interior grade decorative type with decorative face veneer on one face, fixed with screws to timber frame work complete all as specified and directed. |
| 40 | S&F 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete all as specified and directed. |
| 41 | S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 42 | S&F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats complete all as specified. |
| 43 | M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 44 | S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 45 | S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extracted section and fixing bolt and sliding bolts of extracted section complete all as specified and directed. |
| 46 | S&F for aluminium anodised, barrel tower bolt 150mm of extruded section complete all as specified and directed. |
| 47 | S&F for aluminium handle 150mm cast type anodised complete all as specified and directed. |
| 48 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed. |
| 49 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beeds complete all as specified and directed. |
| 50 | S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 51 | All as item 50 above but figured glass pin head type complete all as specified and directed. |
| 52 | S&F sheet glass ordinary quality 4.00 mm thick as in window, showcase aluminium frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket complete all as specified and directed. |
| 53 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm complete all as specified and directed. |
| 54 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm complete all as specified and directed. |
| 55 | S&F MS framed work as in grills conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 56 | M&L Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of red oxide zinc chrome to steel surface complete all as specified and directed. |
| 57 | S&F in repairs Decorative wooden finished curtain rod mild steel chromium plated of 20 mm dia complete all as specified and directed. |
| 58 | S&F decorative wooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete all as specified and directed. |
| 59 | Taking up or down 15mm steel tubing and connections complete all as specified and directed. |
| 60 | All as per item No 59 here-in-before but 25mm bore complete all as specified and directed. |
| 61 | S&F 20 mm dia of CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed. |
| 62 | S&F 25 mm dia Plain CPVC SDR 11 on walls, ceiling or laying in floor including fitting in floors complete all as specified and directed. |
| 63 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed. |
| 64 | S&F in repair plastic pedestal pattern seat cover with flat bottom and cover and MS chromium plated hanging type device complete all as specified and directed. |
| 65 | S&F in repairs vitreous China squatting pan 'orrissa' pattern white colour of size 580x440mm with integral foot rests including 'p' trap and provision of cement concrete for making surface good complete all as specified and directed. |
| 66 | S&F in repairs 10 litre capacity PVC symphonic action type for low level flushing cistern including all fittings and including flushing pipe complete all as specified and directed. |
| 67 | S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with pedestal including brackets complete all as specified and directed. |
| 68 | S&F in repairs for vitreous china Under Counter sunk Modular wash basin white flat back size 190x550x430mm including fixing of 32mm low density polyethylene pipes (LDPE) of pressure rating 6kg/cm2,coupling, complete all as specified and directed. |
| 69 | S&F in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” complete all as specified and directed. |
| 70 | S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 71 | S&F in repair bib tap of PTMT any colour 15mm dia complete all as specified and directed. |
| 72 | S&F in repairs Stop valve 15mm dia, concealed type chromium plate fancy type with long shank and cup complete all as specified and directed. |
| 73 | S&F in repairs sink cock fancy type (table mounted) with 215 mm swivel spout complete all as specified and directed. Make - Cera model No.F2003302 or its equivalent approved by GE. |
| 74 | S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed.Make: Cera Model F2002161 or its equivalent approved by GE. |
| 75 | S&F in repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pressure, with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 76 | S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 77 | S&F inrepairs PVC bathroom Cabinet mirror of size 500x400mm complete all as specified and directed. Make- Prayag Cat No-556 or its equivalent approved by GE. |
| 78 | S&F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed. |
| 79 | S&F of 32mm waste pipe for wash hand basin complete all as specified and as directed. |
| 80 | S&F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and as directed. |
| 81 | S&F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange complete all as specified and as directed. |
| 82 | S&F in repairs CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats complete all as specified and as directed. |
| 83 | S&F in repairs of CP health faucet including necessary holding arrangements with screws etc complete all as specified and as directed.Make: Cera Make-F-8030103 or its equivalent approved by GE. |
| 84 | S&F in repairs corner Glass shelf of cera make including necessary holding arrangements with screws etc all as specified and directed.Make: Cera Model F-5005102 or its equivalent approved by GE. |
| 85 | S&F PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed. |
| 86 | S&F PVC(SWR) floor trap 75mm dia, with grating including jointing to waste pipe fixed in solvent cement complete all as specified and as directed. |
| 87 | Demolition and breaking up drain pipes ( salt glazed ware , AC, PVC or reinforced concrete ) set in cement mortar of internal dia 75-110mm including any earth work and demolition of PCC, complete all as specified and as directed. |
| 88 | S&F in repairs PVC(SWR) Pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 89 | S&F in repairs PVC(SWR) Pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 90 | S&F in repairs PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 91 | S&F PVC (SWR) bends 75 mm dia in any radius with access door etc. complete all as specified and as directed. |
| 92 | S&F PVC (SWR) bends 110 mm dia in any radius with access door etc. complete all as specified and as directed. |
| 93 | S&F PVC (SWR) branch piece single 110mm Dia (single 'Y') equal or unequal with access door including creating necessary provn in the existing PVC waste including jointing with rubber washer and solvent clamps etc.complete all as specified and as directed. |
| 94 | S&F in repairs CP grating size 100mm door etc. complete all as specified and as directed. |
| 95 | S&F in repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm door complete all as specified and as directed. |
| 96 | S&F for pully operated clothes drying system pulley 6 feet(with 4 pipes) consisting of four anodized aluminium pipes each of outer dia 22mm and inner dia 19.80 mm and pully made up of derlin with rope guide mounted on channel pair of length 24\\"(diatance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with self tapping screws provided with kit rope will be polyster braided undyed of 3.5+0.50 mm dia complete all as specified and as directed. |
| 97 | S&F Wall mounted stand consisting of four anodized, Aluminum pipes, each of outer dia 22mm and inner dia 19.8mm, mounted on anodized aluminium angle of size 30 x 30x3 mm, Model- Mount it 20-4 pipes, 5 ft each complete all as specified and as directed. |
| 98 | M&L for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and the prelaminated side with different design and other side plain white of density not less than 600kg/cum, 18mm board should be 100% lead free, water proof, termite proof and moisture/weather proof and good screw holding capacity including all fittings complete all as specified. |
| 99 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 10 cm complete all as specified and directed. |
| 100 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 15 cm complete all as specified and directed. |
| 101 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 20 cm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender