Educational and Research Institute Boards / Undertakings / PSU Closing in 12 days TDR #57631307

Tender For Supply Of Arthroscopic Instrument

Issued by Boards / Undertakings / PSU · Wardha, Maharashtra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Oct 2026
12 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Wardha → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Supply Of Arthroscopic Instrument , Supply Of Arthroscopic Instrument , Arthroscope With Trochar Sheath : 30 Degree 4 Mm Compatible With Existing System (Should Be Compatible With Smith & Nephew System) , Arthroscope With Trochar Sheath : 70 Degree 4 Mm. Compatible With Existing System Smith & Nephew. , Knee Probe: Callibrated Hand Held Instrument Need Specifically For Knee Arthroscopy , Shoulder Probe: Callibrated Hand Held Instrument Need Specifically For Shoulder Arthroscopy , Acl Reconstruction Drill Bits: Drill Bits Of Size- 6 Offse Of Size - 6.5 Mm. Compatible With Present System Smith & Nephew. , Acl Reconstruction Drill Bits: Drill Bits Of Size- 7Mm, Offse Of Size - 6.5 Mm. Compatible With Present System Smith & Nephew. , Acl Reconstruction Drill Bits: Drill Bits Of Size- 8 Mm, Offse Of Size - 6.5 Mm. Compatible With Present System Smith & Nephew. , Acl Reconstruction Drill Bits: Drill Bits Of Size- 9 Mm, Offse Of Size - 6.5 Mm. Compatible With Present System Smith & Nephew. , Acl Reconstruction Drill Bits: Drill Bits Of Size- 10 Mm, Offse Of Size - 6.5 Mm. Compatible With Present System Smith & Nephew. , Acl Reconstruction Drill Bits: Drill Bits Of Size- 11 Mm, Offse Of Size - 6.5 Mm. Compatible With Present System Smith & Nephew. , Endobutton Reamer : 4.5Mm. Compatible With Existing System Smith & Nephew. , Suture Retriever Cum Grasper.: (Suture Retriever Cum Grasper Specially Design Instruments That Can Retrieve And Can Grasp Suture Optimal Tool For Arthroscopic Tissue Grasping/Reduction, Foreign Body Removal, And Suture Retrieval/Management. The Distal Serrated Tip Of The Jaws Functions As A Tissue And Suture Grasper, While The Proximal Section Of The Jaws Facilitates Slide-Through Suture Retrieving. Autoclavable.) , Knee Scorpion : The Single Portal, Reusable Meniscus Suture Passer With Low Profile 5 Degree Up Curve Tip And 3.2Mm Narrow And 4.6Mm Width Shaft And 13 Cm Shaft Length, It Must Be A Reusable And Autoclavable Device To Be Used With Disposable Needle And Should Be Able To Pass And Retrieve Suture In One Step. The Suture Passer Should Have Ability To Pass 0 Or 2-0 Uhmwpe Suture Or 0.9 Mm Uhmwpe Tapes- , Shoulder Traction System : (3 Point Traction System For Shoulder Positioning In Arthroscopy ) , Fibertape Cutter : (Reusable Suture Cutter Flat With 3.4Mm Diameter Designed Specifically For Cutting Of Uhmwpe Tapes And Total Length 13 Cm) , Acl Zig For All Inside Technique: 1) Universal Handle With Simple Wheel Locking Mechanism For One Handed Adjustment Of Making Hook At Desired Position Should Accommodate Multiple Drill Sleeves For Retrograde Reaming And Antegrade Reaming With Feature Of Side Release Mechanism To Disengage Easily From The Drill Sleeve In Open/Arthroscopic Ligament Reconstruction. 2) Tibial Acl Marking Hook For Retro Construction Drill Guide With 8-10 Mm Wide Tip With 7-8 Mm Pin Exit From Cross Hair Laser Mark. 3) 3.5Mm Stepped Drill Sleeve For Creating Sockets The Drill Sleeve Optionally Can Act As A Depth Stop For Retrograde Drilling. 4) A Racheting Drill Sleeve For Retro Construction Drill Guide, 2.4 Mm For Entry Point In Bony Footprint And Caliberated In Order To Measure Intraosseous Tunnel Lengths During Arthroscopic Ligament Reconstructions. 5) Femoral Foot Print Acl Marking Hook For Retro Construction Drill Guide To Be Used From Lateral Portal For Making Anatomic Tunnel Having 7-8Mm Round Tip To Visualize Socket Before Drilling And Has Boh Options As Right And Left. , Switching Stick And Cannula Dilator For Shoulder Surgery: 1) A Reusable Stainless Steel Stick Of 4 Mm Diameter And 16 Inch Length With Blunt Pointed End To Avoid Damage Of Delicae Structures. 2) A Reusable Sharp Distal End Obturator For Facilitation Of Easy Entry Of 6.25Mm Diameter Cannula In Arthroscopic Portals With Similar Color Coded Handle As That Of 6.25 Cannula Color In Order For Easy Identification. 3) A Reusable Sharp Distal End Obturator For Facilitation Of Easy Entry Of 8.25 Mm Diameter Cannula In Arthroscopic Portals With Similar Color Coded Handle As That Of 8.25 Cannula Color In Order For Easy Identification. , Meniscus Root Repair Zig: Meniscus Root Repair Point-To-Point Guide. It Should Allow To Directly Target Their Drill Location At The Meniscal Root Footprint, While The Over-The -Back Marking Hook Sits Securely Over The Back Of The Tibia To Allow Stable Drilling Tunnel Preparation Can Inbuilt Change 0 To 40 Deg Left Right.

BOQ

Name of Work:- Supply of Arthroscopic Instrument
Sl. No. Item Description
1Supply of Arthroscopic Instrument
2Arthroscope with Trochar sheath : 30 degree 4 mm compatible with Existing system (Should be compatible with Smith & Nephew System)
3Arthroscope with Trochar sheath : 70 degree 4 mm. Compatible with Existing system Smith & Nephew.
4Knee probe: Callibrated Hand Held Instrument need specifically for Knee Arthroscopy
5Shoulder Probe: Callibrated Hand Held Instrument need specifically for Shoulder Arthroscopy
6ACL reconstruction drill bits: Drill bits of size- 6 Offse of size - 6.5 mm. Compatible with Present system Smith & Nephew.
7ACL reconstruction drill bits: Drill bits of size- 7mm, Offse of size - 6.5 mm. Compatible with Present system Smith & Nephew.
8ACL reconstruction drill bits: Drill bits of size- 8 mm, Offse of size - 6.5 mm. Compatible with Present system Smith & Nephew.
9ACL reconstruction drill bits: Drill bits of size- 9 mm, Offse of size - 6.5 mm. Compatible with Present system Smith & Nephew.
10ACL reconstruction drill bits: Drill bits of size- 10 mm, Offse of size - 6.5 mm. Compatible with Present system Smith & Nephew.
11ACL reconstruction drill bits: Drill bits of size- 11 mm, Offse of size - 6.5 mm. Compatible with Present system Smith & Nephew.
12Endobutton reamer : 4.5mm. Compatible with Existing system Smith & Nephew.
13Suture retriever cum grasper.: (Suture retriever cum grasper specially design instruments that can retrieve and can grasp suture optimal tool for arthroscopic tissue grasping/reduction, foreign body removal, and suture retrieval/management. The distal serrated tip of the jaws functions as a tissue and suture grasper, while the proximal section of the jaws facilitates slide-through suture retrieving. autoclavable.)
14Knee Scorpion : The single portal, reusable meniscus suture passer with low profile 5 degree up curve tip and 3.2mm narrow and 4.6mm width shaft and 13 cm shaft length, it must be a reusable and autoclavable device to be used with disposable needle and should be able to pass and retrieve suture in one step. the suture passer should have ability to pass 0 or 2-0 UHMWPE suture or 0.9 mm UHMWPE tapes-
15Shoulder Traction System : (3 point traction system for shoulder positioning in Arthroscopy )
16FIBERTAPE CUTTER : (REUSABLE SUTURE CUTTER FLAT WITH 3.4MM DIAMETER DESIGNED SPECIFICALLY FOR CUTTING OF UHMWPE TAPES AND TOTAL LENGTH 13 CM)
17ACL zig for all inside technique: 1) Universal handle with simple wheel locking mechanism for one handed adjustment of making hook at desired position should accommodate multiple drill sleeves for retrograde reaming and antegrade reaming with feature of side release mechanism to disengage easily from the drill sleeve in open/arthroscopic ligament reconstruction.2) Tibial ACL marking hook for Retro construction drill guide with 8-10 mm wide tip with 7-8 mm pin exit from cross hair laser mark. 3) 3.5mm stepped drill sleeve for creating sockets the drill sleeve optionally can act as a depth stop for retrograde drilling. 4) A Racheting Drill sleeve for Retro construction drill guide, 2.4 mm for entry point in bony footprint and caliberated in order to measure intraosseous tunnel lengths during arthroscopic ligament reconstructions. 5) Femoral foot print ACL marking hook for Retro construction drill guide to be used from lateral portal for making anatomic tunnel having 7-8mm round tip to visualize socket before drilling and has boh options as right and left.
18Switching stick and cannula dilator for shoulder surgery: 1) A reusable stainless steel stick of 4 mm diameter and 16 inch length with blunt pointed end to avoid damage of delicae structures. 2) A reusable sharp distal end obturator for facilitation of easy entry of 6.25mm diameter cannula in arthroscopic portals with similar color coded handle as that of 6.25 cannula color in order for easy identification. 3) A reusable sharp distal end obturator for facilitation of easy entry of 8.25 mm diameter cannula in arthroscopic portals with similar color coded handle as that of 8.25 cannula color in order for easy identification.
19Meniscus root repair zig: Meniscus root repair point-to-point guide. It should allow to directly target their drill location at the meniscal root footprint, while the over-the -back marking hook sits securely over the back of the tibia to allow stable drilling tunnel preparation can inbuilt change 0 to 40 deg left right. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57631307
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 13-10-2026
Authority
Authority Name Mahatma Gandhi Institute Of Medical Sciences
Work Description Tender for Supply Of Arthroscopic Instrument , Supply Of Arthroscopic Instrument , Arthroscope With Trochar Sheath : 30 Degree 4 Mm Compatible With Existing System (Should Be Compatible With Smith & Nephew System) , Arthroscope With Trochar Sheath : 70 Degree 4 Mm. Compatible With Existing System Smith & Nephew. , Knee Probe: Callibrated Hand Held Instrument Need Specifically For Knee Arthroscopy , Shoulder Probe: Callibrated Hand Held Instrument Need Specifically For Shoulder Arthroscopy , Acl Reconstruction Drill Bits: Drill Bits Of Size- 6 Offse Of Size - 6.5 Mm. Compatible With Present System Smith & Nephew. , Acl Reconstruction Drill Bits: Drill Bits Of Size- 7Mm, Offse Of Size - 6.5 Mm. Compatible With Present System Smith & Nephew. , Acl Reconstruction Drill Bits: Drill Bits Of Size- 8 Mm, Offse Of Size - 6.5 Mm. Compatible With Present System Smith & Nephew. , Acl Reconstruction Drill Bits: Drill Bits Of Size- 9 Mm, Offse Of Size - 6.5 Mm. Compatible With Present System Smith & Nephew. , Acl Reconstruction Drill Bits: Drill Bits Of Size- 10 Mm, Offse Of Size - 6.5 Mm. Compatible With Present System Smith & Nephew. , Acl Reconstruction Drill Bits: Drill Bits Of Size- 11 Mm, Offse Of Size - 6.5 Mm. Compatible With Present System Smith & Nephew. , Endobutton Reamer : 4.5Mm. Compatible With Existing System Smith & Nephew. , Suture Retriever Cum Grasper.: (Suture Retriever Cum Grasper Specially Design Instruments That Can Retrieve And Can Grasp Suture Optimal Tool For Arthroscopic Tissue Grasping/Reduction, Foreign Body Removal, And Suture Retrieval/Management. The Distal Serrated Tip Of The Jaws Functions As A Tissue And Suture Grasper, While The Proximal Section Of The Jaws Facilitates Slide-Through Suture Retrieving. Autoclavable.) , Knee Scorpion : The Single Portal, Reusable Meniscus Suture Passer With Low Profile 5 Degree Up Curve Tip And 3.2Mm Narrow And 4.6Mm Width Shaft And 13 Cm Shaft Length, It Must Be A Reusable And Autoclavable Device To Be Used With Disposable Needle And Should Be Able To Pass And Retrieve Suture In One Step. The Suture Passer Should Have Ability To Pass 0 Or 2-0 Uhmwpe Suture Or 0.9 Mm Uhmwpe Tapes- , Shoulder Traction System : (3 Point Traction System For Shoulder Positioning In Arthroscopy ) , Fibertape Cutter : (Reusable Suture Cutter Flat With 3.4Mm Diameter Designed Specifically For Cutting Of Uhmwpe Tapes And Total Length 13 Cm) , Acl Zig For All Inside Technique: 1) Universal Handle With Simple Wheel Locking Mechanism For One Handed Adjustment Of Making Hook At Desired Position Should Accommodate Multiple Drill Sleeves For Retrograde Reaming And Antegrade Reaming With Feature Of Side Release Mechanism To Disengage Easily From The Drill Sleeve In Open/Arthroscopic Ligament Reconstruction. 2) Tibial Acl Marking Hook For Retro Construction Drill Guide With 8-10 Mm Wide Tip With 7-8 Mm Pin Exit From Cross Hair Laser Mark. 3) 3.5Mm Stepped Drill Sleeve For Creating Sockets The Drill Sleeve Optionally Can Act As A Depth Stop For Retrograde Drilling. 4) A Racheting Drill Sleeve For Retro Construction Drill Guide, 2.4 Mm For Entry Point In Bony Footprint And Caliberated In Order To Measure Intraosseous Tunnel Lengths During Arthroscopic Ligament Reconstructions. 5) Femoral Foot Print Acl Marking Hook For Retro Construction Drill Guide To Be Used From Lateral Portal For Making Anatomic Tunnel Having 7-8Mm Round Tip To Visualize Socket Before Drilling And Has Boh Options As Right And Left. , Switching Stick And Cannula Dilator For Shoulder Surgery: 1) A Reusable Stainless Steel Stick Of 4 Mm Diameter And 16 Inch Length With Blunt Pointed End To Avoid Damage Of Delicae Structures. 2) A Reusable Sharp Distal End Obturator For Facilitation Of Easy Entry Of 6.25Mm Diameter Cannula In Arthroscopic Portals With Similar Color Coded Handle As That Of 6.25 Cannula Color In Order For Easy Identification. 3) A Reusable Sharp Distal End Obturator For Facilitation Of Easy Entry Of 8.25 Mm Diameter Cannula In Arthroscopic Portals With Similar Color Coded Handle As That Of 8.25 Cannula Color In Order For Easy Identification. , Meniscus Root Repair Zig: Meniscus Root Repair Point-To-Point Guide. It Should Allow To Directly Target Their Drill Location At The Meniscal Root Footprint, While The Over-The -Back Marking Hook Sits Securely Over The Back Of The Tibia To Allow Stable Drilling Tunnel Preparation Can Inbuilt Change 0 To 40 Deg Left Right.
Basic Detail
Tender No eTender/2026-27/CPS/061
Bidding Type Tender
Location
City Wardha
State Maharashtra
Key Dates
Publish Date 22 Sep 2026
Submission Date 13 Oct 2026
Open Date 15 Oct 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 20000
Exemption Available
Document List
0539eb37-9509-4946-9091-5a3c37b04318.html
BOQ_974243.xls
Tendernotice_1 (10).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 22, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 13, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Oct 15, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 14 days

Tender Documents

Download All (ZIP) ↓
html

0539eb37-9509-4946-9091-5a3c37b04318.html

xls

BOQ_974243.xls

pdf

Tendernotice_1 (10).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders