Tender For Stop Gap Arrangement For Day To Day Maintenance And Upkeeping Of Civil Works Of Residential Building, Nandira Colliery, Talcher Area (For A Period Of 120 Days).
Tender Value
48.92 Lakhs
Estimated cost
Bid Submission
27 Sep 2026
5 days left
EMD
61200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anugul → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stop Gap Arrangement For Day To Day Maintenance And Upkeeping Of Civil Works Of Residential Building, Nandira Colliery, Talcher Area (For A Period Of 120 Days).
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground all complete as per direction of EIC :With cement mortar 1:4 (1 cement : 4 fine sand) |
| 3 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 4 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 5 | Brick work with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 8 | Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws,joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge. Extruded section profile size 48x40 mm |
| 9 | Providing and fixing to existing door frames.24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 00x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers,complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
| 10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 11 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering in all works up to plinth level : 1:4:8 (1cement : 4coarse sand : 8graded stone aggregates 40 mm nominal size). |
| 13 | Cement concrete flooring 1:2:4 (1cement : 2coarse sand : 4graded stone aggregates) finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete: 40 mm thick with 20 mm nominal size stone aggregates. |
| 14 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour.Old work (one or more coats). |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 17 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 18 | Finishing walls with Acrylic Smooth exterior paint of required shade:Old work (One or more coat applied @ 0.90 ltr/10 sqm |
| 19 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, withnuts and screws etc. complete : 300x16 mm |
| 20 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm |
| 21 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10mm |
| 22 | Providing and fixing Aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125mm |
| 23 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 24 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 25 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 27 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 28 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 29 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1cement : 4 fine sand) |
| 30 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 31 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. |
| 32 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 33 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 34 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 35 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 36 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 37 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Medium shade pigment using 50% white cement 50% Grey cement |
| 38 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, cherry/ruby red. Area of slab over 0.50 sqm |
| 39 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.One coat |
| 40 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 41 | Half brick masonry with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand) |
| 42 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 43 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet |
| 44 | Lettering with black lapan paint of approved brand and manufacture |
| 45 | Day to day maintenance of carpentary wors by engaging one skilled carpenter and one unskilled helper as per direction of EIC. |
| 46 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. |
| 47 | Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of Size of Tile 600 x 600 mm |
| 48 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Gutter .(600 mm over all girth) |
| 49 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. |
| 50 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with lsl, lS:3564, embossed on the body,door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 51 | Providing stainless steel butt hinges 100x58X1.9 mm lS : 12817 marked in a phased manner as per requirement of approved make as perdirection of ElC. |
| 52 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper |
| 53 | Cleaning of drains including removal of earth/ slush/ mud/ silt etc. from drains including disposal of the same within a lead of 50 metres. |
| 54 | Upkeeping of concrete pavement/ Black topped roads excluding coal transport road by brooming and disposal of collected debris/ waste at collection pit/ dustbins or at specified locations within a lead of 50 metres including all tools & plants like spade, basket, brooms with handle stick complete as per the direction of Engineer-In-Charge |
| 55 | Cutting of grass with grass cutting machine/grass mower (Operation based on petrol) to required shape as per the instruction of the Engineer-in-charge. |
| 56 | Cleaning of septic tank with removal of sludge night soil etc, complete with putting the waste materials by digging pit within a distance of 1.00km and covering the same as per the instruction of EIC. |
| 57 | Cleaning and Uprooting of trees/plants/vegetation/debris etc. on the existing building including uprooting of rank vegetation on the buiding blocks, water tanks, chajja, kitchen/sanitary pipes, walls, etc. including reparing plastering incuding cutting branches or trunks of fallen trees at different places of quarter line and disposal upto nearest dustbin with all lead and lift as per directions of Engineer in charge. |
| 58 | Removal of chokage / blockage of inspection chambers by removing silt, sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of Engineer-In-Charge. |
| 59 | Disposal and dead animals like street dogs, pigs, cats, etc. as and when required including digging of pit and buring the same as per instruction of EIC. |
| 60 | Disposal and dead animals as and when required including digging of pit and buring the same as per instruction of EIC(a)Dead Disposal and dead animals like Cow,Ox,Buffalow, etc. as and when required including digging of pit and buring the same as per instruction of EIC. |
| 61 | Removal of chokage / blockage of manholes by removihg silt, sludge and other foreiSn material5 and disposal of the same to the nearest dustbins etc. complete as per the direction of Engineer in charge. |
| 62 | Removal of chockage /blockage of lewer lines by removing silt, sludge and other foreign materials and disposal of the sarne to the nearest dustbins etc. Complete as per the direction of Engineer in charge. |
| 63 | Carriage of garbage or earth mixed other wastes by tractor trolley including manual loading and unloading and disposing at garbage dumps or at any other specified location as perthe direction of Engineer-ln-Charge.(For lead of I km) |
| 64 | clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 65 | Trimming of trees & cutting of dead part of trees in colony,near other structures etc and disposal of the same at an appropriate place as per instruction of Engg I/c. |
| 66 | Supplying BI- larva 25WPas per direction of EIC |
| 67 | Spraying insecticide in drains in and around the colony area,mine premises,parts of premises under Nandira Colliery,Talcher Area for a period of twoyears as per instruction of EIC |
| 68 | Thermal fogging operation for mosquito control by vehicle mounted machine from 5pm to 8 pm including machine cost, cost of insecticide(Cyphenothine 5% EC 10ml or pyrepherium 2% extra @20ml per liter of Diesel)( cost of Driver and Operator etc all should be paid by contrator as per direction of EIC.) |
| 69 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 20 mm nominal outer dia Pipes |
| 70 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work : 25 mm nominal outer dia Pipes |
| 71 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work : 20 mm nominal outer dia Pipes |
| 72 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes |
| 73 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore |
| 74 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore |
| 75 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia nominal bore |
| 76 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 40 mm dia nominal bore |
| 77 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 50 mm dia nominal bore |
| 78 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 79 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal borebore |
| 80 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 81 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :610x460 mm bowl depth 200 mm (kitchen sink without drain board) |
| 82 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 83 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 84 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 85 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 86 | Providing and fixing white vitreous china water closet squatting pan (lndiantvpe) :Long pattern W.C. pan of size 580 mm |
| 87 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 88 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm |
| 89 | Providing and fixing on wall face unplasticized PVC – moulded fittings / accessories for unplasticized rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to IS: 5382 leaving 10mm gap for thermal expansion: Bend 87.5 degree: 110mm bend. |
| 90 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe |
| 91 | Providing and fixing un-plasticised PVC pipe clips of approved design to unplasticized PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1cement : 4coarse sand) and making good the wall etc. complete: 110mm. |
| 92 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore |
| 93 | Providing and fixing of 100mm G.I pipes complete with G.I fittings including trenching & refilling(External work) all complete as per instruction of the EIC. |
| 94 | Providing and fixing of 150 mm G.I pipes complete with G.I fittings including trenching & refilling(External work) all complete as per instruction of the EIC. |
| 95 | Providing 50mm dia G.I flange as per instruction of EIC |
| 96 | Providing 80mm dia G.I flange as per instruction of EIC |
| 97 | Providing and fixing 150mm dia G.I flange of approved quality as per instruction of EIC |
| 98 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :100mm Class I |
| 99 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 125 mm diameter : Class I |
| 100 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :150mm Class II |
| 101 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. of approved make as per instruction of EIC(the tail pieces will be paid separately) : 80mm dia of class -II |
| 102 | Providing brass spindle suitable for CP pillar cock, CP bib cock of approved make as per direction of ElC |
| 103 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil.Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 104 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia |
| 105 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia |
| 106 | Providing 600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and guard rail of standard size of approved make as per direction of EIC. |
| 107 | Providing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore of approved make as per instruction of EIC |
| 108 | Providing Brass stop-cock 15 mm dia confirming to relevant IS of approved make as per direction of EIC. |
| 109 | Providing C.P. brass waste for sink or wash basin : 32 mm as per instruction of Engineer-in-Charge |
| 110 | Providing 32 mm cp waste for wash basin of 4inch long of approved make as per direction of EIC |
| 111 | providing coupling 40 mm for kitchen sink of approved make as per direction of EIC |
| 112 | Providing brass R.S. (20mm to 15 mm) of approved make as per instruction of EIC. |
| 113 | Providing brass R.T. (20mm to 15 mm) of approved make as per instruction of EIC. |
| 114 | Providing CPVC FTA brass of approved make as per direction of EIC |
| 115 | Providing Cpvc brass MTA(25 mm) of approved make as per direction of EIC |
| 116 | Provlding Brass bib-cock 15 mm dia confirming to relevant lS of approved make as per direction of ElC. |
| 117 | Providing 15 mm CP brass pillar tap of approved quality by (PLAZA brand or equivalent) as per instruction of Engineer-in-charge. |
| 118 | Providing Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore confirming to relevant IS as per direction of EIC. |
| 119 | Providing CPVC reducing Elbow 90° of approved make as per direction of EIC. 25 x 20 mm dia |
| 120 | Providing CPVC PLAIN ELBOW- 20mm dia of approved quality as per instruction of Engineer-in-charge. |
| 121 | Providing CPVC reducing Tee of approved make as per direction of EIC. 40 x 25mm dia |
| 122 | Providing CPVC TEE - 20mm dia of approved quality as per instruction of Engineerin-charge |
| 123 | Providing CPVC UNION - 25mm dia of approved quality as per instruction of Engineer-in-charge. |
| 124 | Providing Stainless steel Spindle with check nut for 4\\" Valve approved make as per directlon of EIC |
| 125 | Providing Stainless steel Spindle with check nut for 6\\" Valve approved make as per directlon of EIC |
| 126 | Providing at site of gland packing of approved quality for valve as per instruction of EIC |
| 127 | Providing CPVC SOCKET - 25mm dia of approved quality as per instruction of Engineer-in-charge. |
| 128 | Providing CPVC SOCKET - 20mm dia of approved quality as per instruction of Engineer-in-charge. |
| 129 | Providing flush bend for flushing cistern of length 1.00 Mtr of approved make as per direction of EIC. |
| 130 | Providing CPVC PLAIN ELBOW- 25mm dia of approved quality as per instruction of Engineer-in-charge. |
| 131 | Providing CPVC Tank nipple 25MM dia of approved quality as per instruction of Engineer-in-charge. |
| 132 | Providing PVC washer suitable for brass bib cock and stop cock of approved make as per direction of EIC |
| 133 | Providing M-seal adhesive or equivalent (in packets of 100 gm) as per instruction of Engineer-in-Charge. |
| 134 | Providing brass spindle suitable for CP pillar cock, cp bib cock of approved make as per direction of ElC |
| 135 | Providing CPVC solvent |
| 136 | Providing CPVC ball valve of approved make as per direction of EIC. 20 mm dia |
| 137 | Providing Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia of approved make as per direction of ElC. |
| 138 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore |
| 139 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore. |
| 140 | Providing polyethylene waler storage tank cover as per inslruction of Engineer-in-charge. |
| 141 | Providing 15 mm PTMT bib cock of approved make as per direction of EIC |
| 142 | Providing PTMT pillar cock of approved quality and colour . 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms of approved make as per instruction of EIC. |
| 143 | Providing CPVC UNION - 32mm dia of approved quality as per instruction of Engineer-in-charge. |
| 144 | Providing CPVC UNION - 40mm dia of approved quality as per instruction of Engineer-in-charge. |
| 145 | Providing CPVC UNION - 50mm dia of approved quality as per instruction of Engineer-in-charge. |
| 146 | Providing CPVC RS 25MM to 30MM dia of approved quality as per instruction of Engineer-in-charge |
| 147 | Providing CPVC RS 32MM to 40MM dia of approved quality as per instruction of Engineer-in-charge |
| 148 | Providing CPVC reducing Tee of approved make as per direction of EIC: 25X20mm dia |
| 149 | Providing CPVC reducing Tee of approved make as per direction of EIC: 40X25mm dia |
| 150 | Providing CPVC PLAIN ELBOW- 32mm dia of approved quality as per instruction of Engineer-in-charge |
| 151 | Providing GI ELBOW 40MM dia of approved quality as per instruction of Engineer-in-charge |
| 152 | Providing CPVC TEE - 32mm dia of approved quality as per inslruction of Engineer-in-charge. |
| 153 | Providing CPVC TEE - 40mm dia of approved quality as per inslruction of Engineer-in-charge. |
| 154 | Providing CPVC SOCKET - 32mm dia of approved quality as per instruction of Engineer-in-charge. |
| 155 | Providing CPVC SOCKET - 40mm dia of approved quality as per instruction of Engineer-in-charge. |
| 156 | Providing PVC VALVE 25mm dia of approved quality as per instruction of Engineer-in-charge. |
| 157 | Providing PVC VALVE 32mm dia of approved quality as per instruction of Engineer-in-charge. |
| 158 | Providing PVC VALVE 40mm dia of approved quality as per instruction of Engineer-in-charge. |
| 159 | Day to day maintenance of water supply net work and plumbing work etc. with all labour cost but excluding cost of materials as per instruction of Engineer Incharge. |
| 160 | Cleaning of over head water tank (HDPE / Masonary) by applying bleaching powder, washing the tank neatly as per instruction of EIC (Upto 2000 Litre capacity) |
| 161 | Supplying pig lead at site of work |
| 162 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lid |
| 163 | Providing and fixing CP Health Faucet with CP Tube & Hook set and Bib cock two in one quater turn of Jaquar make or approved equivalent quality complete set i/c cost of labour and materials complete as per instruction of EIC. |
| 164 | Providing GI clamp of approved make as per instruction of EIC |
| 165 | Providing PTMT - Towel Rail (600 mm) of approved make as per direction of EIC |
| 166 | Providing PVC 'P' trap 100 mmX100 mm for European pan of approved make as per direction of EIC |
| 167 | Providing pvc 100 mm X100 mm nahani trap of approved make as per direction of EIC. |
| 168 | Supplying and providing harpic solution or its equivalent approved brand for cleaning of toiletes as and when required basis as directed by Engineer in Charge |
| 169 | Supplying and providing Soap based multi-use cleanser and deodorant (BENGAL CHIEMICALS tiger brand white phenyl or its equivalent approved brand) in sealed container(s) of 500ml capacity and distributing the same to all residential quarte(s) and service building(s) as directed by Engineer-in-Charge. |
| 170 | Supply and providing of black phenyl (BENGAL CHEMICAL Lamp brand) or its equivalent approved brand in sealed container of450 ml capacity as per direction of Engineer-in-charge. |
| 171 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender