Tender For Construction Of Kalyan Mandap With Boundary Wall At Maidankel Gp
Tender Value
95 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
5 days left
EMD
95000
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendujhar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Kalyan Mandap With Boundary Wall At Maidankel Gp
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in hard soil or Gravelly soil within 50 m initial lead & 1.50 m initial lift including levelling & dressing the bed & lifting the excavated materials within initial lead as per direction of Er. in Charge clear from work site with laying in layers of 0.30 m in depth , breaking the clod to maximum 5 to 7 cm in size & rough dressing the bed including cost of all labour etc. all complete . |
| 2 | Filling sand in foundation & plinth well watered & rammed including cost , conveyance to site , royalty , cess DMF & EMF and additinol royalty etc all taxes of all materials & cost of all labour complete |
| 3 | C.C. ( 1 : 3: 6 ) using 40 mm size hgcb metal free from weathered skin & all foreign materials including cost , conveyance to site , watering and curing,royalty , cess DMF & EMF and additinol royalty etc all taxes of all materials & cost of all labour complete |
| 4 | C.C. ( 1 : 2: 4 ) using 12 mm size hgcb chips free from weathered skin & all foreign materials including cost , conveyance to site , watering and curing,royalty , cess DMF & EMF and additinol royalty etc all taxes of all materials & cost of all labour complete |
| 5 | R.C.C. work in C.C. M-20 Grade of concrete using 20 mm & down graded size hg chips including hoisting & laying the concrete, watering and curing etc. including cost of centering and shuttering for the work etc. all complete to required levels laid in layers including cost, conveyance to site , royalty , cess DMF & EMF and additinol royalty etc. all taxes of all materials & cost of all labour complete Base of Column |
| 6 | Plinth Band |
| 7 | Column & Beam (Ground floor)) |
| 8 | Staircase |
| 9 | Lintel(Ground Floor) |
| 10 | Chhaja |
| 11 | Roof Slab ( Ground Floor) |
| 12 | Fly ash brick masonry in cement mortar (1:6) including watering and curing etc. complete including cost conveyance, royalities, cess DMF & EMF and additinol royalty & taxes of all mateirals & cost of all labour with T & P required for the work etc all complete in all respect as per direction of the Engineer in charge in super structure. In F/P (Ground Floor) |
| 13 | In Superstructure (Ground Floor) |
| 14 | Fly ash brick masonry in cement mortar (1:4) including watering and curing etc. complete including cost conveyance, S/S |
| 15 | Cutting, Straightening coiled or bent up TOR steel, bending, binding, welding and jointing if necessary and tying the grills and placing in position including cost of binding wire 18 to 20 gauge as required for R.C.C. works and providing fan hooks, hoisting, lowering, and laying the grills in floors and others etc. including cost of steel, conveyances, labour, royalties taxes with T & P etc. all complete in all respect as per the Direction of the Engineer in charge |
| 16 | 20mm thick cement Plaster in CM (1:4) over stone work in inside including racking out joints finishing smooth with proper plumb and line, curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T & P required for the work etc comp.and as per direction of Engineer-incharge |
| 17 | 6 mm thick cement plaster in C.M ( 1 : 4 ) to RCC surface finished smooth including closed deep chipping and slury treatment including cost, conveyance to site , royalty , cess DMF & EMF and additinol royalty etc all taxes of all materials & cost of all labour etc. all complete . |
| 18 | 16 mm thick CP (1;6) after racking out the joints including watering & curing etc. complete with cost , conveyance, royalty,cess DMF & EMF and additinol royalty etc all taxes of all materials and cost of all labour etc. all complete |
| 19 | 12 mm thick CP (1:6) after racking out the joints including watering & curing etc. complete with cost , conveyance, royalty,cess DMF & EMF and additinol royalty etc all taxes of all materials and cost of all labour etc. all complete . |
| 20 | Supplying, fitting, and fixing up window(sliding type) made up Aluminium section 9778 as windows frame,section No.4095,4096 and 9777,3994 as shutter frame with 5mm.thick black glass as panel fitted with rubber beading including locking arrangement including all fittings ,cost of glass etc. complete as per direction of Engineer-in-charge. |
| 21 | providing and laying 60 mm thick factory made CC inter locking paver block of M30 grade made by block making mechine with strong vibroatray compaction of approved size |
| 22 | Supplying , fitting & fixing of M.S. angle framed & square bar grilled and Door & Windows with Grills and shutter of approved design & size provided with horns or W.I. Clamps including cost , conveyance etc. all taxes of all materials & cost of all labour complete . |
| 23 | Painting two coats of synthetic enamel paint over a coat of primer of approved quality and approved shade confirming to ISI on steel work to give an even shade including sand papering and making the surface smooth in all floors at all heights including cost, conveyance,taxes of all materials, labour,cess T& P scaffolding required for the work and complete. |
| 24 | Priming one coat with any approved primer to including watering and curing complete with cost of all materials and cost of all labour and cess with T & P. required for the works etc. all complete. |
| 25 | Wall painting 2 coats to walls with Plastic Emulsion paint of any approved shade on New work after cleaning the surface including watering & curing etc. complete including cost of weather coat & cost of all labour and cess with T & P. required for the works etc. all complete . |
| 26 | Wall painting 2 coats to walls with Water proffing Weather coat paint of any approved shade on New work after cleaning the surface including watering & curing etc. complete including cost of weather coat & cost of all labour and cess with T & P. required for the works etc. all complete . |
| 27 | Supplying, fitting & fixing Vitrified Tile 600mmx600mm Plain Ivory in floors of size 600mm x 600 mm of approved make conforming IS:13755 laid on 20 mm thick cement mortar(1:4)and filling joints with white cement of approved quality including cost of all materials, taxes, labour, T&P , etc. required for the work all complete as per direction of Engineer-incharge(for new work only) |
| 28 | Fixing Vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm plain (Ivory) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the Vitrified tiles including rubbing and polishing complete including cost of precast tiles. |
| 29 | Fixing ceramic Tiles (30cmx30cm / 40cmx40cm special plain/printed series ceramic floor tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755) in floor , treads or steps and landing on a 25mm thick bed of cement mortar 1:1 (1cement: 1sand) jointed with neat cement slurry mixed with pigment to match the shades of the ceramic tiles including rubbing and polishing, cost of precast tiles complete as per direction of Enginer-in-charge |
| 30 | Fixing colour Glazed tiles in wall on 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including polishing complete as per direction of Engineer-in-charge. |
| 31 | Fixing Vitrified industrial Tile of premium grade having thickness 8mm to 10mm confirming to IS 4457 of size 300mmx300mm in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the Vitrified tiles including rubbing and polishing complete including cost of precast tiles. |
| 32 | Supplying, fitting and fixing of Unplasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Three Track -Three panel sliding window - 60 Series duly manfactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and winodw sash 39 mm x 58 mm x 2.5mm capable of mounting single glazing system structurally reinforced with hot dip glavanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINt GOBAIN make duly fixedwith EPDMweathering seal resistant and thesystem is to be installed using Reinforced large coupler at the siteusing anchor fasteners, siliconrubber sealant, easy glazing/deglazing at siteetc, including costand conveyance ofall materialsaccessories, labourcharges, materialsand productconforming toASTM D 638-14,EN-477-95 andother applicablecodes andstandards and as per direction ofEngineer inCharge.(Rategiven by Ofice ofthe Engineer-INChief (Civil) OdishaNirman Soudha |
| 33 | Supplying, fittingand fixing of Unplasticised PolyVinyl Chloride(UPVC)(FENESTA/NCLVEKA LTD)casement Door -60 Series dulymanfactured usingUPVC reinforcedprofiles of 60mm x55 mm x 2.5 mmfor outer frames,102 mm x 60 mm x2.25mm forcasement doorSash Profile and74 mm x 60 mm x2.5 mm mullionprofile capable of mounting singleglazing system structurallyreinforced with hotdip glavanised upto 50 microns ofminimum thicknessof 2.0 mm prefabricated &welded through fusion welding thedoor sash shall befitted with 12mmthick WPC Boardof green ply makeduly fixed withEPDM weatheringseal resistantaccessories likeclipping lockingsystem made of aluminium 1 no perset of sashes andthe system is to beinstalled at the siteusing anchor fasteners, siliconrubber sealant, easy glazing/deglazing at siteetc, including costand conveyance ofall materialsaccessories, labourcharges, materialsand productconforming toASTM D 638-14,EN-477-95 andother applicablecodes andstandards and asper direction ofEngineer inCharge. (Rategiven by Ofice of |
| 34 | Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes,labour,T&P,e tc.complete. and as per the direction of Engineer in Charge. |
| 35 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost,conveyance, taxes of all materials, labour,T&P etc. required for the complete in all respect. and as per direction of Engineer in Charge |
| 36 | Supplying, fitting, and fixing of PVC Door including all cost of material & Labour etc. complete as per direction of Engineer-in-charge. |
| 37 | Supplying,fitting & fixing of MS Square pipe in hand railing using 50X50X5mm. thick square hallow pipe with Balustrade of size 50mm.x50mm. x5mm.@ 0.90m.C/C and MS square pipe bracing of size 32mm.x32mm.x3mm. In 3 rows in stair case as per approved design and specification,buffing,polishing etc. with cost, conveyance, taxes of all materials labour T & P etc. required for the completion in all respect. |
| 38 | Earthwork in hard soil or gravelly soil within 5 Km.mechanical carriages and spreading in filling area/road berm within initial lead and lift including dressing and leveling the bed, etc. as per direction of Engineer-in-Charge.) |
| 39 | Providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D1785/1989(Sch-80) |
| 40 | 25mm dia ASTMD Pipe |
| 41 | 20mm dia ASTMD Pipe mtr |
| 42 | supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls fo |
| 43 | Supplying all materials, labour, T&P for providing fitting and fixing of brass/C.P fittings of the f |
| 44 | 15 mm dia C.P Bib cock (Long Body) |
| 45 | Angle coak make Jaguar/ Cera/ Hindware and equivalent |
| 46 | 25mm dia FW Valve |
| 47 | 20mm dia FW Valve |
| 48 | Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindri |
| 49 | Supplying all materials, labour, T&P and fixing wash hand basin with hole for pillar tap with C.I/M |
| 50 | Supplying all materials, labour, T&P and fixing pedestrial for wash hand basin complete recessed at |
| 51 | Supplying all materials, labour, T&P and fixing C.P/Brass waste of the following nominal diameter fo |
| 52 | Supplying all materials, labour, T&P and fixing P.V.C waste pipe of the following nominal diameter f |
| 53 | Supplying all materials, labour, T&P and fixing 15 mm dia P.V.C connection pipe of the following nom |
| 54 | 15mmx15mm Brass Elbow |
| 55 | 20mmx20mm Brass Elbow |
| 56 | 25mmx20mm Brass Elbow |
| 57 | 20mm x 1.5\\" CP Nipple |
| 58 | 20mm Elbow (PVC) |
| 59 | 25mm Elbow (PVC) |
| 60 | 32mm Elbow (PVC) |
| 61 | 25mm Tee (UPVC) |
| 62 | 110mm dia OD PVC Pipe |
| 63 | 110mm dia PVC Bend |
| 64 | 110mm dia PVC Tee |
| 65 | 110mm dia PVC Door Tee |
| 66 | 75mm dia OD PVC Pipe |
| 67 | 75mm dia PVC Bend |
| 68 | 20mm Brass MTA |
| 69 | 25mm Socket (Sc80) |
| 70 | 20mm Socket (Sc80) |
| 71 | Solvent Cement (UPVC) 237 ML pack |
| 72 | Taflon tape |
| 73 | Clamp for fixing of PVC Pipe |
| 74 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR |
| 75 | Group-B L.P- F.P- C.B.P- |
| 76 | Group-C L.P- F.P- C.B.P- |
| 77 | S/F of 5 step type Modular electronic Fan Regulator anti bacterial ISI Marked with all connection co |
| 78 | Supplying,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 n |
| 79 | Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal |
| 80 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & |
| 81 | Supplying and Installation of AC Point having 16-20A DP MCB, C series enclosure, Schneider/Siemens/L |
| 82 | 2 no single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm co |
| 83 | 2 no single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm co |
| 84 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single cor? 1.5 sq. mm cop |
| 85 | 4 nos slngle cora 8 sq. mm copper wlra for phase ond neutrol and 02 noa of slng!a4 sq. mm coppor wlre for oartli contlnuly conductor In 32 mm dia non motalllcheavy duty conduit. (4X0+2X4) |
| 86 | 4 nos single core Î0 sq. mm copper wlre for phase and neural and 02 nos of slnglecore 6 sq. mm copper wlra for earth conllnuty conductor In 40 mm dia non mata|IIc heavy duty conduit. (4X10+2X6} |
| 87 | EARTHING Supplying,installation,testing & commissioning of materials and installation of Gl earth plate 600mm x 600mm x 6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineerin-charge |
| 88 | Providing and fixing 25 mm X 5 mm dia G.I strip on wal/surface With required DMC insulator and nut bolt connection etc. as required. |
| 89 | Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. |
| 90 | Quality control Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender