Tender For Development & Upgradation Of Silver City Boat Club, Cuttack
Tender Value
5.44 Crore
Estimated cost
Bid Submission
06 Oct 2026
0 days left
EMD
5.44 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development & Upgradation Of Silver City Boat Club, Cuttack
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Dismantling and removing R.C.C. columns, beams, slab, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m lead.as directed by Engineer-in-charge. as per the direction of the Engineer-in-charge |
| 3 | Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead.as per the direction of the Engineer-in-charge |
| 4 | Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead.as per the direction of the Engineer-in-charge |
| 5 | Double under reamed pile foundation with RCC M20 using 12mm size black hard granite crusher broken chips including cost of borring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.as per the direction of the Engineer-in-charge |
| 6 | 300mm dia and 6.0M long. |
| 7 | For each additional depth of 0.5m beyond initial depth of 6.0m add extra to the rate |
| 8 | Single under reamed pile foundation with RCC M20 using 12mm size black hard granite crusher broken chips including cost of borring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.as per the direction of the Engineer-in-charge |
| 9 | 250mm dia and 3.0M long. |
| 10 | Earth work in excavation in all kinds of soil (Ordinary, hard soil & stoney earth soil ) for foundation trenches within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department as per the direction of the Engineer-in-charge |
| 11 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only).as per the direction of the Engineer-in-charge |
| 12 | Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour, cess and T&P required for the work etc. complete in all respect. as per the direction of the Engineer-in-charge |
| 13 | Providing & laying Plain Cement concrete (PCC ) of proportion (1:2:4) in foundation and floors using 12mm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour, cess and T&P required for the work etc. complete in all respect. as per the direction of the Engineer-in-charge |
| 14 | Providing & laying Plain Cement concrete (PCC ) of proportion (1:1.5:3) in foundation and floors using 12mm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour, cess and T&P required for the work etc. complete in all respect. (For minor repair Works Only) as per the direction of the Engineer-in-charge |
| 15 | R.C.C. work of Grade- M 25 in following works using 20mm size &down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S./TMT/HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position, centering & shuttering as per the direction of the Engineer-in-charge |
| 16 | Foundation and Column Base |
| 17 | Plinth beam |
| 18 | Column & Beam |
| 19 | Chajja |
| 20 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. lifting and placing in position as per design complete including cost of bars , binding wires , including cost of all materials, labour, conveyance, loading and unloading, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights)-Thermo Mechanically Treated bars as per the direction of the Engineer-in-charge |
| 21 | Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), for foundation & plinth with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. |
| 22 | Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), for superstructure with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. |
| 23 | Providing 16mm thick C.P. 1:6 finished even and smooth on masonry walls including racking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. |
| 24 | Providing 12mm thick C.P. 1:6 finished even and smooth on masonry walls including racking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. |
| 25 | Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, ,es of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. |
| 26 | Painting to external surface of building with two coats of weather seal coat of approved shade over coat of primer and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. |
| 27 | Finishing surfaces of walls with Cement based wall Putty (Water based) of approved make & finished smoothand even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes , labour T &P etc complete.as per the direction of the Engineer-in-charge. |
| 28 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 29 | Supplying and fixing of Pre cast kerb stone of size 600mm x300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984(SOR 2022-item no-25.17, Page No-234) as per the direction of the Engineer-in-charge |
| 30 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. (SOR 2022-item no-25.17, Page No-235) as per the direction of the Engineer-in-charge |
| 31 | Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.) as per the direction of the Engineer-in-charge |
| 32 | Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, royality of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. |
| 33 | Supplying, fitting and fixing protection fencing each of panel 2.50mtr. Long and 1.70mtr height vertical above supporting wall top and 500mm embedded in supporting wall, 3nos. 35x35x5mm horizontal angle posts of 2.50mtr length and 500mm embedded in supporting wall, 3nos. 35x35x5mm horizontal angle (one 200mm above wall top, one at bend point and another at inclined end), 3Nos vertical / inclined flat 35x5mm fitted and weided with 11 gauge 25x25mm square wire mesh with all lebour,labour cess, materials and T & P etc complete as directed by the Engineer-in-charge. |
| 34 | Supplying, filling and Spreading moorum and consolidation with VRR including watering and cost and conveyance of moorum as per the direction of the Engineer-in-charge |
| 35 | Providing, supplying, laying, and fixing approved quality HDPE Geocell for strengthening and reinforcement of moorum layers in embankments, roadways, pathways, parking areas, and other civil engineering works, conforming to relevant IS/IRC specifications and approved manufacturer standards. The geosynthetic material shall be of specified tensile strength, durability, and resistance to biological and chemical degradation, suitable for soil reinforcement and load distribution applications. The rate shall include supply of all materials, transportation, handling, loading, unloading, laying, jointing, overlapping, anchoring, labour, tools, equipment, testing, quality control, and all incidental works required for complete installation of the geosynthetic reinforcement system, complete in all respects as per specifications and directions of the Engineer-in-Charge. |
| 36 | Providing and applying approved quality **TerraSil (nano-polymer soil stabilizing additive)** for stabilization, waterproofing, and strengthening of moorum surfaces, roads, pathways, parking areas, shoulders, and other pavement applications, in accordance with the manufacturer's specifications and approved methodology.The work shall include surface preparation, scarification of existing moorum layer to the required depth, mixing of TerraSil solution with water in the specified proportion, uniform spraying and blending with the moorum material using suitable equipment, shaping to the required profile, moisture conditioning, compaction with appropriate rollers to achieve the specified density, and curing as recommended by the manufacturer.The stabilized layer shall provide improved load-bearing capacity, reduced permeability, enhanced resistance to erosion, dust suppression, and increased durability of the moorum surface. The item shall include supply of TerraSil additive, water, mixing, spreading, compaction, testing, quality control, labour, tools, machinery, transportation, loading, unloading, and all incidental works required for complete execution of the soil stabilization treatment as per approved specifications and directions of the Engineer-in-Charge. |
| 37 | Supplying and laying of heavy duty factory made hydraulically pressed and mechanically compacted free cast interlocking pavers of 80mm thick, coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. |
| 38 | Providing dry rubble rock toe with blasted and quarried granite boulders of sizes 30cm and above with all leads and lifts including dumping with packing intrstices properly and surface packing to proper line and level complete as directed by the Engineer-in-charge.(No deduction to be made towords voids in finished section.) |
| 39 | Rough stones dry packing in approns and revetment with hard granite stone 30cm and above size per 1 cum.as per the direction of the Engineer-in-charge |
| 40 | Providing in position, Plain Cement Concrete (PCC) M-25 grade inside the CGCM mattress laid through pumping method and the concrete shall be as per Annexure-J of Amendment No.-3 to IS 456-2000 (Self Compacting Concrete) with 10 mm & downgraded crusher broken hard granite chips mixed in batching and mixing plant, transporting mixed concrete by mechanical means including required quantity of mineral admixture by mass of cementious materials and super plasticizer for workability including cost of all materials, labour and machineries, finishing, curing , clearing the site with all leads, lifts and delifts for all materials as per approved drawings and specifications in canal bed & slope, including cost of construction, maintenance and dewatering of seepage water with all incidental charges including royalty, labour cess etc. complete with construction of cross bonds & ramps as per specification and as per the direction of Engineer-in-Charge. (The measurement shall be made as per actual finished surface area covered with CGCM alongwith concrete with average thickness of 100mm throughout.) |
| 41 | Grouting approns and revetment 23cm deep with Sand.as per the direction of the Engineer-in-charge |
| 42 | Providing, supplying, laying, and fixing **Cementitious Geocomposite Mat (CGCM) with non-woven geotextile backing** of approved grade and thickness, comprising a three-dimensional fibre matrix containing a dry cementitious compound encapsulated between geotextile layers, conforming to the manufacturer's specifications and approved standards.The item shall be suitable for slope protection, drainage channels, embankments, erosion control works, and other civil engineering applications requiring a flexible concrete lining system. The rate shall include all materials, CGCM non-woven mat, anchors, fasteners, hydration, labour, tools, equipment, transportation, loading, unloading, installation, testing, and all incidental works necessary for complete execution as per approved drawings, specifications, and directions of the Engineer-in-Charge. |
| 43 | Providing, supplying, laying, fixing, hydrating, and curing **110 mm thick Cementitious Geocomposite Mat (CGCM)** of approved make and specification, comprising a three-dimensional fibre matrix impregnated with a dry cementitious compound encapsulated between geotextile layers, complete with non-woven backing and conforming to the manufacturer's technical requirements and approved standards.The CGCM lining shall provide a durable, erosion-resistant, impermeable, and low-maintenance protective layer suitable for slopes, embankments, drainage channels, stormwater drains, watercourses, and erosion control applications. The item shall include all materials, CGCM rolls, anchors, fasteners, overlaps, hydration, curing, labour, tools, equipment, loading, unloading, transportation, testing, quality control, and all incidental works required for complete installation as per approved drawings, specifications, and directions of the Engineer-in-Charge. |
| 44 | Supplying, fitting, fixing of stainless steel of 304 grade in hand railing using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90m c/c and stainless square pipe braceng of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification , buffing ,polishing etc. with cost conveyance taxes of all materials , labour , T&P required for completion of the work in all reapect as per the direction of the Engineer- in - charge. |
| 45 | Supplying, fitting, fixing of stainless steel letter of 304 grade of desired size & specification with moulding at sides, polishing and fixing at site with the help of adhesive or screws or nuts, etc including cost of all and complete finished in all respect.as per the direction of the Engineer-in-charge |
| 46 | Providing and fixing 6 mm thick High Pressure Laminate (HPL) cladding over properly designed and fabricated MS frame structure, including supply, cutting, shaping, drilling, and installation of HPL panels of approved make, colour, texture and finish, complete with necessary MS framework, brackets, cleats, supports, fasteners, aluminium/SS profiles, adhesive, sealant, jointing arrangements and all required accessories. The MS frame shall be fabricated from suitable structural sections, duly aligned, welded, cleaned and treated with approved anti-corrosive primer and finish coat, securely anchored to the existing structural surface. HPL panels shall be accurately installed with uniform joints, proper edge finishing and concealed/approved fixing system, including all labour, materials, tools, scaffolding, transportation, wastage and incidentals, complete in all respects as per approved drawings and specifications, measured and paid per Sq.m of finished cladding area. |
| 47 | Providing, fabricating, supplying, transporting, and installing a Portable Shop mounted on a four-wheel chassis complete in all respects, comprising a structural steel frame made up of ISMB, ISMC and Hollow Sections fitted with Base Plate of thickness 3mm for walls, floor and roof, duly welded and finished. The inner and outer surfaces shall be clad with premium-quality High-Pressure Laminate (HPL) sheets of 6mm thickness fixed over suitable backing framework, including all necessary accessories, fasteners, trims, and finishing works. The unit shall be provided with a fixed 12mm thick toughened glass panel of size 8'-0\\" × 8'-0\\" and a front-side toughened glass door complete with fittings, locks, handles, hinges, and all hardware required for proper operation.There are one shutters in each side of the shop The shop shall include provision for one small cupboard and drawer unit for storage purposes. The roof shall be finished internally with PVC ceiling panels fixed over the supporting framework, including all necessary accessories. The item shall also include complete electrical provisions comprising concealed/open conduits, wiring points, switch boxes, socket outlets, lighting points,4 20watt recess mounted led lights of approaved make, 4nos 3watt spot light, 4nos 6watt focus light , wall mounted fan and exhausted fan distribution arrangements, and provision for external electrical connection. The portable shop shall be weather-resistant, structurally stable, and complete with all materials, labour, tools, equipment, transportation, loading, unloading, erection, testing, and commissioning as per approved design and specifications, complete in all respects as per the direction of Engineer-in-charge and Architrct-in-charge |
| 48 | Providing, fabricating, supplying, transporting, and installing a portable Peddler Shop of size 5'-0\\" × 5'-0\\", complete in all respects, comprising an aluminium structural framework fabricated from suitable hollow sections, angles, and members of approved size and thickness complete with all materials, labour, tools, equipment, transportation, loading, unloading, erection, testing, and commissioning as per approved design and specifications, complete in all respects as per the direction of Engineer-in-charge and Architrct-in-charge. |
| 49 | Providing, fabricating, supplying, transporting, and erecting an **FRP Statue of size 10'-0\\" (Length) × 6'-0\\" (Height)**, manufactured from heavy-duty, durable, and weather-resistant **Fiber Reinforced Plastic (FRP)** conforming to relevant ISO standards. The statue shall be formed over a robust internal framework made of galvanized iron (GI) sections of adequate size and strength to ensure structural stability, rigidity, and long service life.The FRP shell shall be of minimum **450 microns thickness**, comprising high-quality fibre mat and resin system with **three-layer FRP lamination**, including gel coat, fibre reinforcement, resin bonding, and all necessary strengthening members. The statue shall be accurately moulded and finished to the approved shape, design, and dimensions.The external surface shall be smoothly finished and coated with premium-grade weatherproof paint, providing a glossy, dust-resistant, UV-resistant, and durable finish. The item shall include all necessary materials, moulding, reinforcement, finishing, painting, fixtures, anchoring arrangements, loading, unloading, transportation, installation, testing, and commissioning, complete in all respects as per approved design, specifications, and directions of the Engineer-in-Charge and Architrct-in-charge |
| 50 | Providing, fabricating, supplying, transporting, erecting, testing, and commissioning a Portable Toilet Block of overall size 20'-0\\" × 20'-0\\", complete in all respects, comprising a structural framework fabricated from ISMB 200, ISMC 200 sections, MS plates, and Hollow Structural Sections (HSS) of approved size and thickness, duly connected with high-tensile nuts, bolts, and welding wherever required to ensure structural stability, strength, and durability.The walls shall be clad internally and externally with 6 mm thick premium-quality High Pressure Laminate (HPL) sheets, fixed over suitable backing framework, including all trims, fasteners, sealants, and finishing accessories. The roof structure shall be complete with weatherproof covering and internally finished with approved quality PVC ceiling panels.The toilet block shall comprise three separate units, namely:Ladies Toilet Unit – comprising 2 Nos. European Water Closets (EWC) 3 Squatting plate urinals and 2 Nos. Wash Hand Basins (WHB) complete with fittings and accessories.Gents Toilet Unit – comprising 2 Nos. European Water Closets (EWC), 3 Nos. Urinals, and 2 Nos. Wash Hand Basins (WHB) complete with fittings and accessories.Differently Abled Toilet Unit – comprising 1 No. European Water Closet (EWC) and 1 No. Wash Hand Basin (WHB), complete with grab bars, accessible fittings, and other provisions as per applicable accessibility standards.The item shall include all internal partitions, doors, ventilation arrangements, sanitary fixtures, CP fittings, traps, pipes, valves, and accessories required for complete functionality. Adequate electrical installations including wiring, conduits, switches, socket outlets, 12 20watt recess mounted led lights of approaved make, , and 4nos exhausted fan, distribution board, exhaust fans, and provision for external power connection shall be provided. Complete plumbing and drainage arrangements including water supply lines, waste pipes, soil pipes, fittings, and provision for external water and sewer connections shall also be included.The rate shall include all materials, labour, fabrication, surface preparation, finishing, loading, unloading, transportation, erection, testing, commissioning, and all incidental works required to complete the portable toilet block as per approved drawings, specifications, and directions of the Engineer-in-Charge and Architrct-in-charge |
| 51 | Providing, fabricating, supplying, transporting, erecting, testing, and commissioning a **Security Room** of approved dimensions, complete in all respects, comprising a structural framework fabricated from **ISMB 200, ISMC 200 sections, MS plates, and Hollow Structural Sections (HSS)** of approved size and thickness, assembled using high-tensile nuts, bolts, and welding as required to ensure structural strength, stability, and durability.The walls shall be clad internally and externally with **6 mm thick premium-quality High Pressure Laminate (HPL) sheets** fixed over suitable backing framework, including all necessary trims, mouldings, sealants, fasteners, and finishing accessories. The roof shall be constructed over the structural steel framework and finished internally with approved ceiling material, complete with weatherproof treatment and all ancillary works.The security room shall be provided with suitable entrance door(s), aluminium/uPVC windows with glazing, ventilation openings/louvers, and all required hardware fittings. Adequate natural and mechanical ventilation shall be provided to ensure comfortable occupancy and proper air circulation.The item shall include complete **electrical installations**, comprising concealed/open conduits, wiring, 2 nos 20 watt LED light fixtures, switches, socket outlets, distribution board, earthing arrangements, and provision for external electrical connection, complete for functional operation.The rate shall include all materials, labour, fabrication, cutting, welding, fastening, surface preparation, finishing, loading, unloading, transportation, erection, testing, commissioning, and all incidental works necessary for completion of the security room as per approved drawings, specifications, and directions of the Engineer-in-Charge. |
| 52 | Design, Supply, fabrication, delivery & irrection of Tensile fabric roofing of SION 900GSM (belgium make) or any equivalent make including rigginf screws , clamps, tensioning Hardware , Tension cable, kedar rod installation with cable, Hardware /aluminium flat , extruded section EDPM gasket with necessary lifting Arrrangements necessary sacaffolding & painting with enamel paint etc. complete including cost of all material , all labour, sundrise T&P etc.complete is all respect as per the direction of the instruction of Enginner-in-charge. |
| 53 | Providing, assembling, and installing heavy-duty 8 ft diameter outdoor dining Round Shape (Fabric- dark Cream C 802) middle pole umbrella with powder-coated aluminium pole (dia 38–48 mm) and 8 reinforced ribs. Canopy fabricated from 280–320 GSM 100% solution-dyed acrylic fabric, featuring UPF 50+ UV resistance, waterproof PU coating, and apex wind vent. Includes crank-lift mechanism, stainless steel hardware, and 25–30 kg weighted stabilizing base, complete with all fittings, delivery, and labor as directed E.I.C |
| 54 | Providing and installing Stackable Arm chair with Aluminium frame powder coated finished with natural cane polish wooven with synthetic wicker. (Diamension: W51 x D58 x h 87 x SH45 x AH63 cms, 4.7 kgs) as per the direction of the instruction of Enginner-in-charge. |
| 55 | Providing, assembling, and installing Dining Table with Aluminium Frame powder coated. Table top in high pressure Laminate. (Diamensions: Dia 90 x H 75 cms) as per the direction of the instruction of Enginner-in-charge. |
| 56 | Providing, assembling, and installing Cast iron and Wood Strip bench 45 kg Age Group: Universal Stand /Legs : Design bench weight : 45kg Wood Strip : 8 Strip (3x1 inch ) 54 inch , Weight Capacity 170kg ( 3 persons ) Bench total height 800mm From Ground , bench seat Height : 487mm Bench Length : 1400mm Wooden fnish &polish as per the direction of the instruction of Enginner-in-charge. |
| 57 | Providing And Painting two coats of duco paint of Approved Shade over one Coat of Duco Primer of ESDEE, TARALAC, SPARKLE, DYNA or Any equivalent make etc. complete is all respect as per the direction of the instruction of Enginner-in-charge. |
| 58 | Providing Decorative Art painting With two Coats of Duco Paint of approved shade over one coat of Duco primer of ESDEE, TARALAC, SPARKLE, DYNA or Any equivalent make etc. complete is all respect as per the direction of the instruction of Enginner-in-charge. |
| 59 | Providing, supplying and fixing twin-compartment 120 Ltr dustbin comprising two separate FRP bins for dry waste (blue colour) and wet waste (green colour), mounted on a sturdy MS stand with suitable support, brackets and fasteners. FRP bins shall be durable, lightweight, corrosion-resistant and suitable for outdoor use, with smooth, easy-to-clean surfaces and clearly marked waste categories. Rate shall include fabrication, painting/powder coating of MS stand, transportation, installation, fixing and all necessary accessories, complete as directed by Engineer-in-Charge |
| 60 | Supply of good quality garden soil preferably red alluvial /sandy loam with texture neither too coarse nor too fine with a fair degree of water retaining capacity sufficiently porous for microbial activity, containing adequate humus with a Ph range from 6.5 to 7.5 should be free from any undesirable inorganic materials like wastages of construction, roots and bushes of wild plants, polythene, garbage etc., including cost, conveyance, royalty etc. as per the direction of the EIC . |
| 61 | Lifting & spreading of good soil uniformly over the surface area as per landscape design etc. complete as per the direction of the EIC . |
| 62 | Supply of cow dung manure, well decomposed, garbage free including including cost, conveyance , loading, unloading etc. complete as per the direction of the EIC . |
| 63 | Lifting & Spreading of cow dung manure uniformly etc. complete as per the direction of the EIC . |
| 64 | Supplying & Turfing of Selection-1 grass carpet of 2\\" thick with well grown disease free grass including loading and unloading and delivery at site & Turfing of grass carpet including watering, rolling as per requirement etc. complete as per direction of Engineer-in-charge. |
| 65 | Supplying & Planting of Foxtail palm 6’ ht plants of well established , healthy , disease free type transported with poly bag including cost of transportation , loading / Unloading etc. , planting of each plant at specified location inluding cost of all labour for earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. |
| 66 | Supplying & Planting of Hedge plants kamini 1'6” ht. plants of well established , healthy , disease free type transported with poly bag including cost of transportation , loading / Unloading etc. , planting of each plant at specified location inluding cost of all labour for earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. |
| 67 | Supplying & Planting of Almonda 2½’ ht plants of well established , healthy , disease free type transported with poly bag including cost of transportation , loading / Unloading etc. , planting of each plant at specified location inluding cost of all labour for earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. |
| 68 | Supplying & Planting of Plumeria 6' ht plants of well established , healthy , disease free type transported with poly bag including cost of transportation , loading / Unloading etc. , planting of each plant at specified location inluding cost of all labour for earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. |
| 69 | Supplying & Planting of Ficus panda 3'0” ht. plants (bushy type) of well established , healthy , disease free type transported with poly bag including cost of transportation , loading / Unloading etc. , planting of each plant at specified location inluding cost of all labour for earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. |
| 70 | Supplying & Planting of Sampen palm 5'0” ht. plants of well established , healthy , disease free type transported with poly bag including cost of transportation , loading / Unloading etc. , planting of each plant at specified location inluding cost of all labour for earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. |
| 71 | Supplying & Planting of Pandanus 1'0” ht. plants of well established , healthy , disease free type transported with poly bag including cost of transportation , loading / Unloading etc. , planting of each plant at specified location inluding cost of all labour for earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. |
| 72 | Supplying & Planting of Bakul 6’ ht plants of well established , healthy , disease free type transported with poly bag including cost of transportation , loading / Unloading etc. , planting of each plant at specified location inluding cost of all labour for earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. |
| 73 | Supplying & Planting of Alternanthera 1'0'’ ht plants of well established , healthy , disease free type transported with poly bag including cost of transportation , loading / Unloading etc. , planting of each plant at specified location inluding cost of all labour for earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. |
| 74 | Supplying & Planting of Syngonium 1'0'’ ht plants of well established , healthy , disease free type transported with poly bag including cost of transportation , loading / Unloading etc. , planting of each plant at specified location inluding cost of all labour for earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. |
| 75 | Supplying & Planting of Juniper 4’ ht plants of well established , healthy , disease free type transported with poly bag including cost of transportation , loading / Unloading etc. , planting of each plant at specified location inluding cost of all labour for earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. |
| 76 | PH INSTALLLATION |
| 77 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes (selfit / ring fit type ) with all PVC fittings of Finolex /Prince/Supreme make as per IS 13592 to walls with nails, bobbins and wooden plugs or laying in trenches including all pipe fittings, jointing materials, tools plant, labour & all material, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. |
| 78 | 160mm dia PVC (SWR) pipe class \\"A\\" ( with wall thickness of 3.2mm to 3.8mm) |
| 79 | 110 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 2.20 mm to 2.70 mm) |
| 80 | 75 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 1.8 mm to 2.20 mm ) |
| 81 | Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware Pedestal wash basin of size 48 x36.5x13.5 cm dia of Hindware make having cat no - 10098 or equivalent type of approved make with Ped-11032 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in- charge. |
| 82 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-FLP-CHR--5053PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 83 | Supplying all materials, labour, T&P and fixing Pillar cock of Jaquar Cat. No.-PRS-031 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of AJAY/ ASHIRVAD/ ASTRAL / SUPREME / ORI-PLAST ETC)confirming to ASTM F442 Specific-2 having thermal stability for hot & cold water supply SDR 11 , including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 85 | 20 mm nominal outer dia Pipes |
| 86 | 25 mm nominal outer dia Pipes |
| 87 | 32 mm nominal outer dia Pipes |
| 88 | 40 mm nominal outer dia Pipes |
| 89 | 50 mm nominal outer dia Pipes |
| 90 | Providing and fixing UPVC pipes of Schedule- 80 ( AJAY/ ASHIRVAD/ ASTRAL / SUPREME/ ORI-PLAST ETC) including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer inCharge. |
| 91 | 25 mm nominal outer dia Pipes |
| 92 | 32 mm nominal outer dia Pipes |
| 93 | 50 mm nominal outer dia Pipes |
| 94 | Providing and fixing UPVC fullway valve of approved make and quality with all materials, labour, tools, plant, scafolding , making good the damages caused, complete in all respects as per the direction of the Engineer-in-charge |
| 95 | 25mm dia |
| 96 | 32mm dia |
| 97 | 50mm dia |
| 98 | Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification as per direction of Engineer-in-charge. |
| 99 | 110mm dia Single Junction with door |
| 100 | 100mm dia Double Junction with door |
| 101 | 110mm dia Cowl |
| 102 | 110mm dia Plain Bend |
| 103 | 110mm dia SWR Door Bend |
| 104 | 100mm dia End Plug |
| 105 | 110mm dia Pipe clip |
| 106 | 75mm dia Plain Bend |
| 107 | Design, supplying, installing, testing & commissioning of Johkasou technology Sewage Treatment plant of capacity 20 KLD (excluding all Civil & construction work) for the following duty: The STP is consist of FRP tank with a footprint of approx. 60% of conventional plants Of size 2.4 M (Width) X 5.26 M (Length) X 2.48 M(Height). Volume of Tanks 1,2 not less than 17.25 m3. The tank consists of Sedimentation and separation chamber, anaerobic section, chlorination box Power consumption is up to 50% lower in comparison to conventional plants (0.4 kWh). Sound must be lower than 60db. Tank can be installed both above ground & below ground. Treatment Capability of Daiki Packaged STP, pH - 6.0 – 8.0, BOD- 20 Mg/L, COD - <70 Mg/L, TSS- Less than 30 Mg/L, OIL & Grease (Mg/L)- <10, T-N - Less than 70 Mg/L, F-Coliform– Less than 100 MPN/100ml Tank consist of 1 nos bar screen of msep material, 2 nos feed pump of CI body of capacity 0.8 cum/hr with head 10-13 mtr, 1 nos Blower for collection tank twin lobe type of capacity 8.0cum/hr with 4000mm/wg, 4 nos Coarse bubble diffuser (disc type) of pvc /epdm material. (Make- Daiki/ equivalent) as per direction of Engineer-in-charge. |
| 108 | ELECTRICAL INSTALLATION |
| 109 | Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/RR KABLE/KEI/Gloster of following size cables as per direction of Engg.-in-Charge. |
| 110 | 3.5core x 95sq mm |
| 111 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 112 | Supplying and making end termination with 3.5 core x95 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. |
| 113 | S/I/T&Commissioning of LT OUTDOOR floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD)as per direction of Engg.-in-Charge. 3P+N Type 1+2 SPD 50 kA/pole with 600A HRC backup fuse shall be installed in the incomers. (Make of SPD-Legrand/Siemens/Schneider/ABB) shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.Provision of cable alley chamber is mandatory. All the feeders shall have ON/OFF/TRIP indication.as per direction of Engineer-in-charge. |
| 114 | In commer-1-01 number of 160A 4P Icu=100%Ics,25Ka MCCB with TM release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula |
| 115 | In commer-2- 01 number of 100A 4P Icu=100%Ics,25Ka MCCB with TMR based release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula |
| 116 | Changeover- 01 no of 100A 4P onload changeover switch ( DG 01 NO)(Make-Legrand/Siemens/Schneider/ABB) |
| 117 | Busbar-1&2 04 numbers of 200Amps Aluminium busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing) |
| 118 | Out going- 5 numbers of 100-63Amps 4P MCCB.Icu=100%Ics,16Ka TMR based release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula |
| 119 | Instrument- (i) 06 numbers phase indicating lamp with toggle switch & HRC fuse. |
| 120 | (ii) 02 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication(iii) All the MCCB outgoing feeders shall have digital ammeter with CT of suitable class 1 rating.(Make-Legrand/Siemens/Schneider/ABB)(iv) 3P+N Type 1+2 SPD 50 kA/pole with 600A HRC backup fuse shall be installed in the incomers. (Make of SPD-Legrand/Siemens/Schneider/ABB) |
| 121 | Supplying,installation,testing & commissioning Of Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required as per direction of Engg. in charge. |
| 122 | Supplying & laying of 6 swg GI WIRE at 0.5m below the ground as strip earth electrode including connection/termination with nut ,bolt ,spring washer etc as required(jointing shall be done by over laping and with 2 sets of brass nut ,bolt & spring washer spaced at 50mm . as required as per direction of Engg. in charge. |
| 123 | Supplying & laying of 25mm x 5 mm GI strip at 0.5m below the ground as strip earth electrode including connection/termination with nut ,bolt ,spring washer etc as required(jointing shall be done by over laping and with 2 sets of brass nut ,bolt & spring washer spaced at 50mm . as required as per direction of Engg. in charge. |
| 124 | Supply, delivery, installation and testing of 5 meter long aesthetically designed Single Arm decorative lighting pole with cast aluminium base casting on thetop. Pole shall be made up of Mild Steel Body and coated with zinc rich primer & pure polyester powder coating of black with gold embellishment finish. Body size of the pole will be Ø88.9mm and having base Plate of size Ø230 x12mm thick with provision for founation bolt. Pole is Compatible for Ø70mm size for cable entry & exist. Junction Box service door is made up cast aluminium and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 32A 4pole terminal connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge. (Make: K -lite Drive way orna bishop KP-12017/homedec/jaquar/Philips/equivalent). |
| 125 | Supply, delivery, installation and testing of 50W LED,110lmens/watt Pendent Light made up of Spun Aluminium Body with clear acrylic diffuser and one cast aluminium crown ring on the middle & another one on the top. System Lumen Output should be minimum 120Lm/W, Type - IV optical distribution and protected with IP 65, Surge Protection : 6KV, THD : <10%. (Make: K -lite Imperial KL-24893/homedec/jaquar/Philips/Equivalent).as per direction of Engineer-in-charge. |
| 126 | Construction of RCC foundation by using M20 grade RCC and Fe 415 grade reinforcement in the foundation by considering the SBC as 10 T per sq mtr and fixing the 4 nos. fdn bolts in that foundation for installation of pole with street light on that foundation(Details Drawing of the foundation attached). The work shall be excuted as per the direction of EIC.The structural calculation, wind load calculation and civil foundation shall be duly approved by the competent authority from civil wing (SE/CCE/Competant authority)before execution of the work.as per direction of Engineer-in-charge. |
| 127 | SITC of 3 meter long decorative lighting pole with 50W LED Post Top light with die-cast aluminium housing and coated with zinc rich primer & pure polyester powder coating of Jet Black Finish, UV Stabilized Clear Polycarbonate diffuser. CCT-3000K, 110lmens/watt,CRI-≥70, IP-65, IK-08, SDCM≤ 3, Lumen maintainance >60,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >88%, Optical Distribution : Type II. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-65/66 protection and other parameters as required by the Engineer-in- Charge. Pole shall be made up of Mild Steel Body with decorative cast iron casting base on the bottom. Pole shall be coated with zinc rich primer & pure polyester powder coating of black & gold embellishment finish. Body size of the pole will be of minimum dia Ø88.9mm and having base Plate of size 200x 200 x12mm thick with provision for founation bolt. Pole is Compatible for Ø70mm size for cable entry & exist. Junction Box service door is made up cast aluminium and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 32A 4pole terminal connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge. (Make: K -lite Pole KP-12018-300 + KL-24518) /homedec/jaquar/Philips/equivalent). |
| 128 | Supply, Installation, testing & commissioning 9W LED Bollard light having Die cast aluminium body and coated with zinc rich primer & pure polyester powder coating of Black Finish, UV Stabilized Translucent Acrylic diffuser. CCT-3000K, CRI-≥70, IP-65, SDCM≤ 3, Lumen maintainance >60,000 burning hours as per L70 B10, Power Factor : >0.90, THD : <10%, Surge Protection : Inbuilt 4 KV, Efficiency : >85%, Optical Distribution :120degree. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-65 protection and other parameters as required by the Engineer-in- Charge. (Make: K -Lite Ritu Bollard KL-6951) / homedec/jaquar/Philips/equivalent) |
| 129 | Supply, Installation, Testing and Commissioning of 18W LED Focus Light having CCT 3000K +/-355K as per ANSI , CRI>80, SDCM<3. The fixture housing must be Made of extruded Aluminium housingfor better thermal healing & Powder coated by Corrosion resistant Nano coating technology. Luminaire must have minimum Ingress protection of IP66. The fixture should be equiped with stabilized Injection moulded special PC diffused optics ensuring low glare. The luminaire must have Integral high efficiency electronic thermally isolated constant current IP66 driver with operating voltage range of 90-205V, power factor > 0.95, THD < 10%, with Inbuilt surge protection of : 3kV and upgraded with integrated External IP67 protected SPD of 10KA surge protection .Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015. CE Certified, ROHS compliant, BIS Certification for Luminaires & Drivers. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. Make: K -lite Nebula KL-22782or, homedec/jaquar/Philips/equivalent). |
| 130 | Supply, Installation, Testing and Commissioning of 50W LED Focus Light having CCT 3000K +/-355K as per ANSI , CRI>80, SDCM<3. The fixture housing must be Made of extruded Aluminium housingfor better thermal healing & Powder coated by Corrosion resistant Nano coating technology. Luminaire must have minimum Ingress protection of IP66. The fixture should be equiped with stabilized Injection moulded special PC diffused optics ensuring low glare. The luminaire must have Integral high efficiency electronic thermally isolated constant current IP66 driver with operating voltage range of 90-205V, power factor > 0.95, THD < 10%, with Inbuilt surge protection of : 3kV and upgraded with integrated External IP67 protected SPD of 10KA surge protection .Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015. CE Certified, ROHS compliant, BIS Certification for Luminaires & Drivers. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Navi KL-24288 ,homedec/jaquar/Philips/equivalent). |
| 131 | Supplying and laying of one number PVC insulated armoured and PVC sheathed XLPE AL. conductor power cable of 1.1 KV grade POLYCAB/FINOLEX/HAVELLS/KEI/RR Kabel/Gloster of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 132 | 4core x10sqmm |
| 133 | 4core x 16 sq mm (OFP TO IND. TIMER PANEL) |
| 134 | 4 core x 4 sq mm (for small power/LIGHT TO POLE) |
| 135 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 136 | Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. |
| 137 | Supplying and making end termination with 4 core x10 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. |
| 138 | Supplying and making end termination with 4 core x16 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. |
| 139 | Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. Make-POLYCAB/FINOLEX/HAVELLS/KEI/RR Kabel/Gloster as per direction of Engg.-in-Charge |
| 140 | Providing,fixing and laying of fallowing dia HDPE pipePN16 ISI marked in ground complete with fitting as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity .make : sudhakar /eqv as per direction of Engg.-in-Charge |
| 141 | 50 mm dia |
| 142 | 40 mm dia |
| 143 | STREET LIGHT: S/I/T&Commissioning of LT OUT DOOR double door cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & painted by simens gray powder coated paint is designed as G.A drawing. (FOR USE) with 63A FP MCCB, 16kA, adjustable thermal relaese, Ics=100%Icu 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 63 A 3P contactor, 100A Aluminium busbar, OLR,RYB,ON,OFF trip indication, 3P+N Type-II SPD 40ka alongwith 63A, 4P MCB,C series, 10kA for the incoming feeder,04 nos 16A 4P MCB,C,10KA as outgoing with 100A stud connector with Undervoltage and overvoltage voltage monitoring relay, Make of- MCB legrand dx3/ schneider acti9 A9N/ Siemens betaguard/ ABB ( SB 200), Make of- MCCB legrand dPx3/ schneider CVS/ Siemens 3VA/ ABB Formula, Make of SPD-ABB/siemens/Schneider/Legrand/OBO/Dehn as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 5 years of acceptance of materials.The panel should be mounted on hot dip GI C channel alongwith RCC foundation.The GA Drawing shall be approved by the SEEC(R&B), Odisha, Bhubaneswar before execution of the work as per direction of Engg.-in-Charge |
| 144 | Supply,installation,testing and commissioning of Supply of 9meter long aesthetically designed QUADRA MAST light pole. Pole shall made up of Hot Dip Galvanized Body and coated with zinc rich primer & pure polyester powder coating and finished with jet black colour and 3 coat Marine grade. The pole shall be suitable for fitting of 4nos of 200W flood light with polycarbonate module lens. Dimension of light must be 607 x 200 x 230mm. Body size of the pole will □150mm from bottom and 100mm size from middle to top. The Pole shall have base Plate□300 x 16mm thick with provision for founation bolt fittings. Pole is Compatible for 70mm size for cable entry & exist. Junction Box service door is made up cast aluminium of size 325 X 90mm and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 4pole studd connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge.(Make: K -lite Pole /Jaquar/Philips/Homdec/equivalent). Provision of GI pipe earthing for High mast with 2.5 M long 40 mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour. (2nos per mast required) Approved colour after treatment along with provision of masonary pedestal duly finished with plaster and painting with GI pipe for cable entering as required.. (2nos per mast required) as per direction of Engg.-in-Charge |
| 145 | Construction of RCC foundation by using M20 grade RCC and Fe 415 grade reinforcement in the foundation by considering the SBC as 10 T per sq mtr and fixing the 4 nos. fdn bolts in that foundation for installation of pole with Solar light on that foundation (Details Drawing of the foundation attached). The work shall be excuted as per the direction of EIC.The structural calculation, wind load calculation and civil foundation shall be duly approved by the competent authority from civil wing (SE/CCE/Competant authority) before execution of the work. |
| 146 | SITC of 200W Outdoor Flood LED lights with polycarbonate module lens provided with silicon gasket for efficient ingree protection with silicon potted driver, IP66, IK08 , bottom opening maintanance , LPW not less than 120.Input Voltage: 85-265V AC ,Body : pressure Die cast Aluminium housing designed to act as heat sink for proper heat dissipation, IP66, CRI greater than eual to 70, burning hours 50,000 hrs, pf greater than 0.95, THD less than 10% as per the Drawing for inspection as required Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj/ equivalent as rerquired & as per direction of Engg.-in-Charge.The luminaire should be Replacement Warranty will be 2 years as per direction of Engg.-in-Charge |
| 147 | S/I/T&Commissioning of LT OUT DOOR double door cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & painted by simens gray powder coated paint is designed as G.A drawing. (FOR USE) with 63A FP MCCB, 16kA, adjustable thermal relaese, Ics=100%Icu 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 63 A 3P contactor, 100A Aluminium busbar, OLR,RYB,ON,OFF trip indication, 3P+N Type-II SPD 40ka alongwith 63A, 4P MCB,C series, 10kA for the incoming feeder,04 nos 16A 4P MCB,C,10KA as outgoing with 100A stud connector with Undervoltage and overvoltage voltage monitoring relay, Make of- MCB legrand dx3/ schneider acti9 A9N/ Siemens betaguard/ ABB ( SB 200), Make of- MCCB legrand dPx3/ schneider CVS/ Siemens 3VA/ ABB Formula, Make of SPD-ABB/siemens/Schneider/Legrand/OBO/Dehn as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 5 years of acceptance of materials.The panel should be mounted on hot dip GI C channel alongwith RCC foundation.The GA Drawing shall be approved by the SEEC(R&B), Odisha, Bhubaneswar before execution of the work as per direction of Engg.-in-Charge |
| 148 | Supply, Installation, Testing and Commissioning of 20W, 1000mm length LED Wall Washer light having 6063 Aluminium Alloy and coated with zinc rich primer & pure polyester powder coating of Jet Black Finish, UV Stabilized toughened glass diffuser and with 3 coat Marine grade. CCT-3000K, CRI-≥70, IP-67, IK-07, SDCM≤ 3, Lumen maintainance >60,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 2.5KV, Efficiency : >85%. Luminaries shall be provided with required IP67 driver and Power connector. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Wall Washer KL-23265/Philips/Panasonic/Wipro/Crompton/Bajaj/Havells/LT/ equivalent).as per direction of Engg.-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender