Tender For Construction Of Balance Work Of Bus Stand At Rakchham District Kinnaur Hp (Sub Head:- providing and Fixing Flooring providing and laying Wooden Shutters P/A Painting & Ws. And Si Etc). Estimated Cost:-₹ 5,74,348- Earnest Money:-₹ 11,500/-
Tender Value
5.74 Lakhs
Estimated cost
Bid Submission
27 Sep 2026
3 days left
EMD
11500
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Balance Work Of Bus Stand At Rakchham District Kinnaur Hp (Sub Head:- providing and Fixing Flooring providing and laying Wooden Shutters P/A Painting & Ws. And Si Etc). Estimated Cost:-₹ 5,74,348- Earnest Money:-₹ 11,500/- Time:- Three Months.
BOQ
| Sl. No. | Item Description |
| 1 | 15mm (fifteen millimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement: six sand) including curing and carriage of materials within all leads and lifts complete in allleads and lifts complete in all respect as per direction of Engineer in Charge. |
| 2 | Providing form work with steel plates 3 15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surface such as soffits of suspended floors, roofs, landings and the like upto any thickness including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 3 | Providing and laying cement concrete 1:1.5:3 (one cement one and half sand three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landings and shelves and their supports, balconies, beams, girder bressumers and cantilever upto all floor level including carriage of material within all leads and lifts complete in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. |
| 4 | Providing and laying second class brick work using common burnt clay building bricks of approved kiln in super structure upto all height and depth in cement mortar 1:6 (one cement: six sand) including curing complete and carriage of materials within all leads and lifts complete in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. |
| 5 | Providing and laying plain cement concrete M-10 (ten) grade nominal mix 1:3:6 (one cement: three sand six graded stone aggregate 40 mm (forty millimetre) nominal size) in open foundations and plinths as per drawings and technical specification for rural roads clause 802, 803, 1202 and 1203 and curing complete including the cost of form work and carriage of materials in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. |
| 6 | Providing and laying mirror polished 19 mm (ninteen milimeter) thick Kota stone minimum Size 55X55cm (fifty five into fifty five centimeter) of uniform colour in flooring of approved shade as per detail slab flooring over 20 mm (twenty milimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement: 4 coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 7 | Kota stone slabs 25 mm (twenty five milimeter) thick in risers of steps, skirting, dado and pillars laid on 12 mm (tweleve milimeter) (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 8 | White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals |
| 9 | Applying Birla White wall care putty over plaster surface after throughly brushing the suface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the suface including carriage of materials within all leads and lifts complete in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. |
| 10 | Painting Two coats (excluding primming coat) on new concrete/masonry/asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with ready mixed primer as per HPPWD specification of 1990 volume-1 including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 11 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 12 | Painting Two coats (excluding primming coat) on over new steel & other metal surfacesafter and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with ready mixed primer as per HPPWD specification of 1990 volume-1 including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 13 | Providing Tor steel reinforcement for RCC work including bending binding and placing in position including cost of binding wire complete in all floors including carriage of materials within all leads and lifts complete in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. |
| 14 | Providing 2nd class deodar wood work in frames of doors, windows, clere story windows and other frames wrought framed and fixed in position including carriage of materials within all leads and lifts complete in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.. |
| 15 | Providing and foxing 40mm (forty millimeter) thick first class deodar wood panelled glazed or panelled and glazed shutter for doors, windows and clere story windows including black enamelled iron butt hinges with necessary screws and 5 mm thic glass including carriage of materials within all leads and lifts complete in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. |
| 16 | Providing and fixing 40mm (forty millimeter) thick first class deodar wood wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85g (Eighty five) gauge with wire of diameter 0.56mm (zero point five six millimeter) for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of material with in all leads, lifts and other incidental charges complete in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. |
| 17 | Providing and fixing 300x16mm (Three hundred into sixteen millimeter) anodized heavy duty Stainless steel sliding door bolt anodized transparent or died to required colour and shade with bolts and nuts screws etcetra as approved by the Engineer-In-Charge complete including carriage of materials within all leads and lifts complete in all respect |
| 18 | Providing and fixing 250 x10mm (two hundred fifty into ten millimeter) heavy duty Stainless steel tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetra as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect |
| 19 | Providing and fixing 150mm (One hundred fifty millimetre) Stainless steel bright finished hard drawn hooks and eyes anodized transparent or dyed to required shade and colour with necessary screws etcetra as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect |
| 20 | Providing and fixing 100mm (One hundred millimetre) mat finish Stainless steel heavy duty handles anodized transparent or dyed to required shade and colour with necessary screws etcetra as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect |
| 21 | Providsienpgaraatnedly, fixing vitreous China wash down, Orissa Pattern water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately). including carnage of material, labour, tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge |
| 22 | Providing and fixing 100 mm size \\"P\\" or \\"S\\" trap for water closet (squatting pan) including jointing the 2.0 trap with the pan and soil pipe in cement mortar 1:1 (one cement one sand) in vitreous china including carnage of material, labour, tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge |
| 23 | Providing and fixing vitreous china wash basin with single hole for piller trap with CI or MS brackets painted white including cutting holes and making good the same but excluding fitting. With flat back in 550 mm X 400 mm including carriage of material, labour, tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 24 | Providing and fixing C.P. brass pillar tap with capstan head In 15 mm dia (Heavy Duty) including carriage of material, labour, tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge |
| 25 | Providing and fixing CP Connection pipe with brass unions 45cm (forty five centimetre) length 15mm (fifteen millimetre) diametre including carriage of materials within all leads, lifts and other incidental charges complete in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. |
| 26 | Providing and fixing automatic flushing cistern with a pair of C.I. Or M.S. brackets complete with 2.0 fittings including C.I. Syphonic apparatus, mosquito proof lid, CP. Brass unions and coupling for connections with iniet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) including entire carriage of matenals in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals |
| 27 | Providing and fxing vitreous china bowl pattern urinal in flat back type of size 430 mm x 260 mm x 350 mm including connecting the unnal with waste pipe by means of white lead mixed with chopped hemp (waste) pipe to be measured and paid for seperatly including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge |
| 28 | Providing and fixing 20 mm dia (Twenty milimeter) brass bib tap (Superior or heavy type) including entire carnage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 29 | Providing and fixing 1216 mm dia(16 mm OD pipe) Plytheline - Aluminium Polyethylene (PE-AL- 50.C PE) composite pressure pipe UV. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall, .All leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. |
| 30 | Providing and fixing 110 mm dia high pressure PVC spigot and socket, waste and vantilating pipes ISI marked including fixing with approved adhesive etc complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 31 | Providing and fixing 75 mm dia high pressure PVC spigot and socket, waste and vantilating pipes ISI marked including fixing with approved adhesive etc complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 32 | Providing and fixing 110 x 90 mm (One hundred ten into ninty milimeter) PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 33 | Providing and fixing 100 mm (One hundred milimeter) sand cast Iron grating for gully trap. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 34 | Providing and fixing 100mm (One hundred milimeter) nominal bore/diameters PVC plain bend including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 35 | Providing and fixing 75 mm (Seventy five milimeter) nominal bore/diameters nominal bore/diameters PVC plain bend including fixing with approved adhesive etc. complete, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender