Tender For Comprehensive Maintenance Of Otm Accn At Subathu Under Ge Kasauli.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Oct 2026
8 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance Of Otm Accn At Subathu Under Ge Kasauli.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Section - I |
| 2 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.50 sqm complete all as specified and as dircted by Engineer-in-Charge. |
| 3 | Supply and fixing for 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil puty (or beading, any type) in squares n.exc. 0.5 sqm in each pane complete all as specified and dircted by Engineer-in-Charge. |
| 4 | All as per above but 3 mm thick in squares exc.0.5 sqm in each pane-ditto- |
| 5 | Supply and fixing for Figured glass thickness 4 mm, pin hea type and glazing with oil putty in squares n exc 0.5 sq. m in each pane |
| 6 | Supply and fixing for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed by wooden beads or fixed in steel windows by screws complete all as specified and as directed by Engineer in Charge. |
| 7 | Supply and fixing for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm and incl dismantling old sheets, complete as directed by Engr-in-Charge. |
| 8 | Same as item No 6.00 above but plain steel sheet as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape, cut to designed shape (Jhhallar) etc and incl dismantling old sheets, complete all as specified. |
| 9 | Material and labour for Steel work in tubular trusses including special shaped washer etc. complete usingERW or induction butt welded tubes conforming to I.S. 1161- 1979 grade St.-240 and incl dismantling old iron/mild steel work complete all as specified and directed. |
| 10 | Supply and fixing for rolled mild steel in joist, channel, angle or tee sections fixed independently , without connecting plates etc quality conforming to Fe 410 W (Gde E-50 quality A) complete as specified and directed by Engr-in-Charge |
| 11 | Supply and fixing for framed work such as grills, gratings, etc with ends of bars sholderedcand /or riveted or forged into spikes, framed guard bars,barred iron dooes,ladders, framed balustereds, walk ways railing frameworks of water tank and similar works and incl dismantling old iron/mild steel work, all as specified and as directed. |
| 12 | Material and labour for Providing and fixing tiled false ceiling of designer tiles(high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design ( Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, and Dismantling wall and ceiling board (fibre, pulp , insulation etc) or insulation boards/ slabs any thickness all complete at all heights as per directions of EIC. |
| 13 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 14 | Supply and fixing for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawingcomplete all as specified and directed by Engr-in-Charge. |
| 15 | Dismantling of water tanks exc 250 ltrs capacity but not exc 500 ltr capicity and removal at site |
| 16 | Supply and fixing for Rotational moulded PVC, Triple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple(inlet & outlet) etc. but excluding connection of ball valve, over drain pipe complete all as specified and directed. |
| 17 | Dismantling of water tanks exc 500 ltrs capacity but not exc 1000 ltr capicity and removal at site |
| 18 | Supply and fixing for Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with inlet & outlet connections with 15/20mm ball valve & including all fittings such as GI tank nipple 150 mm long with washer & plug etc, complete all as specified and directed. |
| 19 | Material and labour for cleaning existing RCC/PVC Tank of capacity exc 250 ltrs but n.exc 500 Ltr by mentioned process all as directed by Engr-in-charge. |
| 20 | Same as above, but capacity exc 500 ltrs but n.exc 1000 Ltr all as directed by Engr-in-charge.Note: For above item Nos. 18.00 & 19.00 Tank cleaning process includes (a) Dewatering & Removing all settled silt, scale & Dust from inside of tanks using brush manually and applying bleaching power, allowed to rest for 1 hour. (b) Cleaning and rinsing the tank using fresh water to wash out complete and allowed to dry for 30 min. (c) Writting detals of 7 cm height using synthetic enamel paint(white/black colur) to mention date of cleaning including rubbing out old letters written over the tank, complete as specified. |
| 21 | Demolition of cement concrete in ground floors and pavings n exc 15cm thick ( below or above GL) complete all as specified and directed. |
| 22 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed. |
| 23 | Material and labour for joint free Non Skid glazed ceramic tiles (coloured) 600x600x 7 to 8mm thick (square/rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:6) and incl dismantling old floor tiles with bed, complete all as specified and directed by Engr-In- Charge. |
| 24 | Material and labour for joint free glazed ceramic coloured tiles 300mm x 600mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4 and incl dismantling old wall tiles with bed, complete all as specified and directed by Engr-In- Charge. |
| 25 | Material & Labour brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 and incl demolition of old brick work, complete all as specified & directed. |
| 26 | Same as above but except bricks all as specified. |
| 27 | M&L for Rendering 15mm thick on fair faces of old brick work or concrete surfaces at any height incl walls, cornices, chajjas, sun shades etc. in CM 1:4 finished even and smooth without using extra cement and with or without water proofing compound (2% 0f cement content) (External surface) incl necessary using scafolding or shuttering and taking down old plaster, complete all as specified and directed by Engr-In- Charge. Note: If WPC used, then it will paid separately. |
| 28 | Supply only Integral waterproofing compound all as specified as per manufacture instruction complete all as specified and directed by Engr-In- Charge. |
| 29 | Material and labour for preparation of new plastered or unplastered surfaces of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint, complete all as specified. |
| 30 | Material and labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement (Internal surfaces) and taking down old plaster, complete all as specified and directed by Engr-In- Charge. |
| 31 | Material and labour for for applying 3 mm thick (achieved in two coats) wall care putty of new undecorated plastered surfaces of wall complete all as specified and directed |
| 32 | Material and labour for Rendering 5mm thick on ceiling surface in CM 1:3 finished even and smooth and taking down old plaster, complete all as specified and directed by Engr-In- Charge. |
| 33 | Material and labour preparatin of new / previously untreated surface walls & ceiling by applying two coats of oil bound distemper (OBD) on wall surfaces over a coat of primer complete all as specified and directed by Engr-In- Charge. |
| 34 | Supply and fixing in repairs curtain rails anodised aluminium alloy with fixing brackets etc complete all as specified |
| 35 | Taking down chowkhats or frames with shutters (without taking off shutters) not exceeding 1.5 sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge. |
| 36 | Taking down chowkats or frames with shutters (without taking off shutters) exceeding 1.5sq.m and not exc 4.00sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge. |
| 37 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing at site as required complete all as specified & directed by Engineer-in-Charge. |
| 38 | Supply and fixing for 125 x 60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, Peg etc complete all as specified . |
| 39 | Supply and fixing for 105x60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, Peg etc complete all as specified . |
| 40 | Supply and fixing for Flush shutters 30 to 35mm thick for door shutter, solid core construction, with block board core and plywood face panels, commercial type on both side. |
| 41 | Supply and fixing for 2nd class hard wood 35mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze,etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of door shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed |
| 42 | Supply and fixing for 2nd class hard wood 30mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of window shutters as specified in SSR Part-1, complete all as specified and directed. . |
| 43 | Supply and fixing for Factory made box type steel window with side hung shutters (glazing) with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars, including flat iron 50 x 6 mm for cover gaps and flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. Note : Glass/Wire mesh required for fixing in window will be measured and paid for separately |
| 44 | -Ditto-as item no 42.00 above but Gauged shutter without glazing bars. |
| 45 | Supply and fixing for Factory made box type steel section ventilator with top/centre hung shutter double leaf shutter for glazing and wire gauze with pintle hinges & 01 No 150mm mild steel tower bolt, hinges, steel peg stay, steel handle to each shutter, steel handle dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. Note : Glass/Wire mesh required for fixing in ventilator will be measured and paid for separately. |
| 46 | Supply and fixing for factory made Solid PVC door frame of size 50 mmx 47 mm made out of 5mm wood grain printed PVC sheet reinforce with M.S square tube as per specification complete all as specified and directed by Engr-in-charge. |
| 47 | Supply and fixing for factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for styleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvetn cement supplying and fixing in the frame at site as per specification and as per drawing complete all as specified |
| 48 | Supply and fixing for butt hinges 125mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed. |
| 49 | Supply and fixing for butt hinges 100mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed. |
| 50 | Supply and fixing for barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed. |
| 51 | Supply and fixing for barrel tower bolts aluminium anodised extruded section of size 150 mm complete all as specified & directed. |
| 52 | Supply and fixing for barrel tower bolts aluminium anodised extruded section of size 100 mm complete all as specified & directed. |
| 53 | Supply and fixing for aluminium fabricated type extruded handles of size 150 mm complete all as specified & directed. |
| 54 | Supply and fixing for aluminium fabricated type extruded handles of size 125 mm complete all as specified & directed. |
| 55 | Supply and fixing for Aluminium locking bolts, anodised, with bolt not less than 10mm dia, 100 mm size as in repairs, complete all as specified & directed. |
| 56 | Supply and fixing for brass mortice lock, vertical type,4 levers, size 100 mm, as in repairs, all as specified and directed |
| 57 | Supply and fixing for 9 mm thick Pre laminated interior grade both side laminated board in repairs, complete all as specified |
| 58 | Material & Labour for Plain Cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed. |
| 59 | Supply and fixing for 300 mm size MS door spring including roller and roller plate by means of welding complete all as directed by Engineer-in-Charge |
| 60 | Supply and fixing for 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts, fixed on plate or staple plate complete all as specified & directed. |
| 61 | ditto as Item No. 59.00 above above but in repairs |
| 62 | double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring but fixed in repair all as specified |
| 63 | Door seal strip with plastic beading, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 64 | Material and labour preparing new surfaces of wood or wood based material exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer. |
| 65 | Material and labour for preparing new steel surfaces exc 10cm girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 66 | Material and labour for Welding in repairs not exceeding 2.5cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as gates, grills, doors, windows etc., complete all as specified and as directed. |
| 67 | Supply and fixing for in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 68 | Dismantling boarding, any description, fixed in any position with nails |
| 69 | Supply and fixing for Prelaminated Medium density fibre board 18/19mm thick, interior grade pre laminated one side with decorative choice laminations and other side balancing white lamination, fixed to timber framework with screws as in walls panelling, almirah, kitchen cabinates etc, fixed in repair, complete all as specified and directed by Engineer-in-charge. |
| 70 | Material and labour for external teak wood lipping (decorative), 6mm thick of block board or veneered particle board/MDF fixed with nails. |
| 71 | Material & labour piano hings, mild steel bright finish width of flap 30mm fixed in repair including taking out the existing complete all as specified and directed by Engineer-in-Charge. |
| 72 | Supply and fixing for magnetic catches 75mm brass body for use in cup boards of kitchen, ward robes etc. fixed as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 73 | Supply and fixing for 40mm dia cupboard knob of brass, polished, fixed with nut screw and washer, fixed as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 74 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed. |
| 75 | Material and labour for machine cut Granite slab 18-20 mm thick as in steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing, polshing and dismantling old granite with bed, complete all as spd. |
| 76 | Material and labour for Rounding to edges of stone slabs any thick as in in steps, jambs, pillars, cokking plateforms and likes complete all as specified |
| 77 | Material and labour for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and Screed bed or beding layer of morter 20mm thick in cement morter 1:4 for laying floor finishes to receiving the kota stone and dismantling old granite with bed, complete all as specified and directed. |
| 78 | Material and labour for 20 mm black/white/green marble stone, laid over cement screed bed 20 mm thick as like over shelves, floors etc and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick cement screed bed in CM(1:6) incl cutting, waste, rubbing, mirror polshing and dismantling old marble with bed etc complete all as spd complete all as specified. |
| 79 | Material and labour for Mirror/diamond polishing with rubbing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.Note:- for above items Granite, Kota stone & Marble (i) The rate of stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and stone polishing to achieve the desired stone finish all as spfd. |
| 80 | Material and labour for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler one or more coats on old work complete all as specified and directed. |
| 81 | Material and labour PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in shelves / slabs and like with and incl use and waste of necessary form work and demolition of RCC as in chajja/shelves, RCC Tank, kitchen chimney etc., including removal complete all as specified. |
| 82 | Material and labour for MS TMT Bars 8mm/10mm dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 83 | Material and labour for 16 to 18mm Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment and dismantling all as specified and directed. |
| 84 | Providing and fixing white rigid PVC sheet cladding for parking shed ceiling/wall lining, of approved make and quality, minimum 5 mm thick, fixed to GI/wooden framework with stainless steel screws, including necessary trims, joints, corner mouldings and accessories complete. The PVC sheets shall be weather-resistant, termite-proof, water-resistant, easy to clean and conform to relevant IS specifications/manufacturer's standards. The work shall be executed as per MES specifications and directions of Engineer-in-Charge, complete in all respects.If the PVC sheet is intended for roofing rather than ceiling/wall cladding, the description will be different. Let me know whether it is: |
| 85 | Amount of credit of Rs 182133.75 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender