Tender For Comprehensive B/R Maintenance Of Otm Accn Of Zone ‘C At Mil Stn Dagshai Under Ge Kasauli
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Oct 2026
15 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive B/R Maintenance Of Otm Accn Of Zone ‘C At Mil Stn Dagshai Under Ge Kasauli
BOQ
| Sl. No. | Item Description |
| 1 | SCHDULE 'A' |
| 2 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified |
| 3 | Supply and fixing 0.60mm thick Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in any position or slope upto 15 mtr of height including Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings complete all as specified and as directed. complete all as specified and directed. |
| 4 | Supply and fixing 0.60mm thick Pre-painted galvalume aluminium zinc coating GI based plain steel sheet of approved colour having tensile strength of 550 Mpa as in ridges, valley gutters etc ,fixed with self tapping screws in any position or slope upto 15 mtr of height including dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings complete all as specified and as directed. complete all as specified and directed. |
| 5 | Supply and fixing for Fibre glass 2mm thick reinforced translucent corrugated sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc. complete all as specified and directed. |
| 6 | Supply and fixing 0.63 mm thick galvanised corrugated mild steel sheeting, class-8 with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, ISI marked in roofs, walls etc. with grade of zink coating 275, complete all as specified and directed. |
| 7 | Supply and fixing 0.80 mm thick Plain, galvanized mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zink coating 275 complete all as specified and directed. |
| 8 | Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete all as specified and directed. |
| 9 | Material and labour for 2nd class hardwood (Hollock) clean sawn in scantlings, in any position in unframed work, complete all as specified and directed |
| 10 | Supply and fixed in repair 40 mm thick boarding in Floors and Skirting Planed one side, with butt joints and fixed with nails complete all as specified and directed. |
| 11 | Supply and fixing GI Clip in Metal Ceiling plain Globel white colour tiles of size 600 x 600 mm, 0.5 mm thick with 25 mm height, made of GI sheet having galvanizing of 100 gsm/sqm (both side inclusive) , factory painted, 20 % perforation area with 1.8mm dia holes and having NRC of 0.5 module, which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to center, suspending the main C carrier of size 10x38x10mm made of GI steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6mm, rawl plugs of size 38x12 mm and C carrier suspension clip and mair carrier bracket at 1000 mm c/c. Inverted triangle shaped spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centres with help of suspension brackets. Wherever the main C carrier and T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in into spring T , The grid is suspended from the roof with min 6mm GI rods for quick adjustment at max 5000mm length or as per manufacturer instructions etc complete all as specifie and directedNote : Work shall be done by authorised applicator of the manufacturer. |
| 12 | Dismantling wall/ceiling board (fibre, pulp, insulation, etc) or insulation boards/slabs/kitchen cup board, any thickness, including cover fillets and Supply and fixing Plywood 6mm thick, grade BWR, type BB, fixed with screws to timber frame work in ceiling complete all as specified and directed. |
| 13 | Material and labour for Plain fillets 2nd class hard wood exe 13 sqcm and not exe. 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads including dismantling timber scantlings 40 sqcm and under in section, in ceiling complete all as specified and directed. |
| 14 | Material and labour in repair for Plain fillets 2nd class hard wood exe. 6 sqcm and not exe. 13 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed. |
| 15 | Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc. and material and labour for Brick work with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete, all as specified and directed. |
| 16 | Material and labour for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and material and labour coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3, complete all as specified and as directed. |
| 17 | Material and labour for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and material and labour Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed. |
| 18 | Material and labour for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and material and labour for Virified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15 mm thick screed bed 1:6 complete all as specified and as directed. |
| 19 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc and material and labour for 18-20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc.,complete all as specified and as directed. |
| 20 | Rounding to edges of stone slabs one edge as in steps, cooking platform and other similar situation complete all as specified and as directed.. |
| 21 | Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work , and removal the rubbish/ demolished material outside defence land, complete all as specified and directed. |
| 22 | Material and labour for providing reinforced cement concrete 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) in beams, cantilevers, lintels over 1.50m span, complete all as specified and directed. |
| 23 | Providing pre cast cement concrete type B1 1:2:4 (20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. , with plain fair faces, including hamfers, weatherings, throating etc. and setting in mortar 1:4 complete all as specified and directed. . |
| 24 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, for rough finished surface of concrete complete all as specified and directed. |
| 25 | Material and labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed . |
| 26 | Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and material and labour for 10mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 27 | Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.Material and Labour for 15mm thick rendering on surface of any description of brick work, concrete surfaces in cement mortar 1:4 mixed with and including WPC @2% by weight of cement or as per manufacturer’s instructions,finished even and fair, complete all as specified and as directed. |
| 28 | Material and labour for preparation of plastered or unplastered new surfaces of walls of and applying two coat of cement base paint over a coat of cement priming coat of any approved tint complete all as specified and as directed. |
| 29 | Material and labour for preparation of new plastered surface and applying two coats of oil bound distemper on wall over a coat of 2mm thick wall care putty over coat of chalk whiting primer complete all as specified and as directed. |
| 30 | Taking down wooden chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete all as specified and as directed. |
| 31 | Taking down shutter of any description, exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and as directed. |
| 32 | Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete all as specified and as directed. |
| 33 | Taking down and refixing in same location after making nessary repair and make the shutter fit for use, shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed . |
| 34 | Supply and fixing for 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified. |
| 35 | Supply and Fixing 35mm thick, 2nd class HW, Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed. |
| 36 | Supply and Fixing 30mm thick,Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified. |
| 37 | Supply and Fixing IInd Class HW 35mm thick, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats, complete all as specified. |
| 38 | Supply and Fixing 30mm thick 2nd class hardwood, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified and as directed . |
| 39 | Supply and Fixing for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed . |
| 40 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directedNote : Rates are included for M.S. hold fast/ lugs or SS dash fasteners. |
| 41 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 42 | Supply and fixing aluminium powder coated section, as in frame and shutters for door, window, ventilators of standard section and thickness as directed , cut and jointed together with cadium plated steel screws, plugs for fixing screws, etc. complete all as specified. Note-(i) Fixing of shutter with frame shall be as per manufacturers instructions and fitting shall be paid under this item. (ii) Aluminium section shall be of Make “Jindal/Hindalco / Indalco”. (iii) Thickness of powder coating shall not be less than 50 micron. (iv) Frame shall be one or more rebate as per requirement at site. |
| 43 | Supply and fixing anodised Anodised, powder coated (thickness of powder coating not be less than 50 micron), aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 44 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. |
| 45 | Supply and fixing Mild steel work for framed work such as grills, (12mm sqm bars for window / ventilators for guard bars) grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 46 | Supply and fixing in repair Welded steel wire fabric(weight n.exc 4kg/sqm) complete to wood or steel members complete all as specified and directed |
| 47 | Material and Labour for preparing new or untreated steel surface of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 48 | Material and labour for 9mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination ,fixed in aluminium frame work complete all as specified and directed. |
| 49 | Supply and fixing sheet glass 5.0 mm thick glass plain sheet ordinary quality in square exc 0.5 sqm in each pane fixed to aluminium frame with glazing clips etc., complete all as specified and directed. |
| 50 | Supply and fixing for sheet glass 3mm thick, ordinary quality , in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified. |
| 51 | Supply and fixing stainless steel 100 mm long, butt hinges, medium weight and fixed with stainless steel screws complete all as specified and directed. |
| 52 | Supply and fixing stainless steel 200mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed. |
| 53 | Supply and fixing stainless steel 150mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed. |
| 54 | Supply and fixing stainless steel 150mm long handles 'D' type (Heavy duty) glossy finish and fixed with stainless steel screws complete all as specified and as directed. |
| 55 | Supply and fixing stainless steel 200mm long sliding door bolts, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed |
| 56 | Supply and fixing stainless steel 300mm long sliding door bolts, plate type, with bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed |
| 57 | Supply and fixing of 18/19 mm thick Prelaminated particle board, interior grade,prelaminated both sides with decorative choice lamination fixed with screws to timber frame-work, including dismantling of boarding, any description, fixed in any position with nails, complete all as specified and directed. |
| 58 | Supply and fixing continuous (piano) hinge, mild steel bright finish or electro galvanised, width of flap when open 30 mm complete all as specified and directed. |
| 59 | Supply and fixing magnetic catches 100 mm brass body for use in cup boards of kitchen, ward robes etc. fixed as in repairs complete all as specified and directed. |
| 60 | Material and Labour for preparing new wood surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 61 | Material and labour for 9mm thick plywood, 5 No of ply, grade BWR, type BB fixed with screws over timber frame work or over existing wooden planks flooring complete all as specified and directed.Note : Rates are included for preparation of existing wooden planks flooring surface plane, smooth and free from any overhead nails or screws etc and filling the uneven surfaces, depressions, holes on existing wooden planks flooring with mixture of sawdust and wood glue before fixing of plywood. |
| 62 | Material and labour in repairs for PVC tiles / sheets1.5 mm thick laminated plain coloured, marbled mosaic or motled finish, laid with approved rubber based adhesive in floors complete all as specified and directed. |
| 63 | Supply and fixing in repair of 25 mm dia curtain rods, mild steel wall thickness 0.80mm, powder coated with fixing metal ornamental holder and side finals(in pair for each door and window)as approved, fixing with PVC wall plugs bracket and brass screws complete all as specified and directed. |
| 64 | Supply and fixing 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) |
| 65 | Supply and fixing 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) |
| 66 | Supply and fixing in repair, 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534) |
| 67 | Supply and fixing 75mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall confirm be to IS 5382-1985) |
| 68 | Supply and fixing 75 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534) |
| 69 | Supply and fixing 75mm dia of outlet, PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified..(Note- UPVC fittings shall be conforming to BS 4515 DIN 19531 and DIN 19534) |
| 70 | Supply and fixing ( in repair), bib tap screwed down high pressure, long nose with flange,fancy type, cast copper alloy, chromium plated, ISI marked, with capstan head screwed down suitable for 15mm bore pipe or union, complete all as specified. (Note : Weight of bib tap shall not be less than 0.575 Kg) |
| 71 | Supply and fixing in repair, fancy type, angle cock, 15mm dia, cast copper alloy, chromium plated, ISI marked, screwed down, high pressure with capstain head, screwed both ends for iron pipes or for unions complete all as specified and as directed. Make-Prima Art No- PLF-6205 or equivalent model in makes mentioned in Appendix 'B' of tender document . |
| 72 | Supply and fixing in repairs, swan neck Pillar cock, CP 15mm bore cast copper alloy with chromium plated screwed both ends,fancy type, screwed down hidh pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and as directed. |
| 73 | Supply and fixing in repair, 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified and as directed . |
| 74 | Supply and fixing in repair, aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed . |
| 75 | Supply and fixing, water storage tank 500 ltr capacity HDPE Triple layer, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, ISI marked including taking down the unserviceable water tank and removing from site, complete all as specified and directed |
| 76 | Supply and fixing, water storage tank 1000 ltr capacity HDPE Triple layer, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, ISI marked including taking down the unserviceable water tank and removing from site, complete all as specified and directed |
| 77 | Supply and fixing 15mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for 15mm bore iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.28 kg as approved, complete all as specified and directed. |
| 78 | Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed . |
| 79 | Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed . |
| 80 | Supply and fixing of 15mm dia tubes, medium grade, galvanized, ISI Marked, with all fittings such as sockets, bends, elbows, tees etc, fixed to walls and ceiling or laid in floors, including cutting existing steel tubing and screwing, if required for alterations and additions, complete all as specified and directed. |
| 81 | Supply and fixing of 20mm dia tubes, medium grade, galvanized, ISI Marked, with all fittings such as sockets, bends, elbows, tees etc, fixed to walls and ceiling or laid in floors, including cutting existing steel tubing and screwing, if required for alterations and additions, complete all as specified and directed. |
| 82 | Supply and fixing as in repair Vitreous China pedestal wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand and 32mm bore CP coupling long shank , waste fitting complete all as specified and as directed . |
| 83 | Supply and fixing as in repair brass chromium plated wall/sink mixer for mixing hot & cold water for 15mm bore pipes including all connecting fittings, screwed down for iron pipe and fixed complete all as specified and as directed |
| 84 | Supply and fixed (as in repair) for cast copper alloy, chromium plated mixer for mixing hot and cold water,capstan heads, screwed down high pressure with long screwed shank and fly nuts, fancy type screwed for iron pipes and fixed bore of pipe 15mm ,complete all as specified. |
| 85 | Supply and fixing in repair, Gun metal, globe or gates valves, with iron wheel head, screwed down, high pressure, heavy duty, ISI marked, screwed both ends for iron pipe or for union of 20 mm bore complete all as specied and directed.Make- Cat No PGT-1402 of PRIMA or equivalent model in makes mentioned in Appendix 'B' of tender document. |
| 86 | Supply and fixing as in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white including fixing bolts, PVC water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated complete all as specified and as directed . |
| 87 | Supply and fixing in repair, vitreous china squatting pan of orissa pattern, size 680 x 470 mm , white (Ist quality) with ‘P’ or ’S’ trap, with front or back inlet and integral foot rests of any pattern (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc including including provision of cement concrete (1:5:10) type E2 with stone aggregate and making good to existing floor surface and connection to flush pipe etc. complete all as specified and directed. |
| 88 | Supply and fixing 10 litre capacity virgin polypropylene cistern, ISI marked, coloured at low level complete with PVC bend/flush pipe and making all connection including taking down existing high or low level unerviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified. Make: CERA/ HINDWARE / PARRYWARE, |
| 89 | Supply and fixing in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm making good wall by painted or distempered finish to match existing complete all as specified and directed. |
| 90 | Material and labour Coloured Prepolished chequered cement concrete tiles (30cmx30cmx25mm thick) in white cement and pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified, including demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons, etc. removing the rubbish outside the defence land ,complete all as specified and directed. |
| 91 | Material and labour PCC 75mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed. |
| 92 | Demolition of cement concrete in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and directed. |
| 93 | Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons, etc. removing the rubbish outside the defence land ,complete all as specified |
| 94 | Material and Labour for Machine pressed precast cement concrete with grey cement and pigment, rubber moulded, interlocking designer paver blocks, in any and shape, confirming to IS-15658-2006 of 60mm thickness, M-35 grade in path, hard standing, etc. laid over and including 50 mm thick bedding layer of sand complete, all as specified and as directed. |
| 95 | Material and Labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in fixing of hold fasts, copings, bed plates,kerbs or mud stops, lintels upto 1.50m span, plinth courses , seismic and other bands and the like, finished the surface fair and even, including necessary form work complete all as specified and directed. Note- If reinforced concrete, reinforcement shall be measured and paid for separately. |
| 96 | Supply and fixing of Powder coated aluminum three track sliding Glazed window with three shutters, Aluminum 03 shutters sliding, each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces.(i) Window frame of cross section 101mm x 40mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x1.1 mm thick. (iii) Sliding shutter frame of cross section 40x18x1mm.(iv) Aluminium glazing strip of size 18.2x16.66mm. (v) 4mm thick float glass superior quality make Modi float for 2 Nos shutter. (vi) IDE rubber gasket for fixing glass. (vii) Locking cleat per shutter - 01 No (viii) Two nos sliding rollers per shutter (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm for one shutter. (xi) Fixing screws for frame with wall - 06 No per window(x) Anodised aluminium grill fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size.(Note : 1. The rates shall be inclusive of provision of and fixing of rubber packing/gasket. Glass pane and wire gauge shall be measured and paid for separately. Thickness of Powder coating shall not be less than 50micron. |
| 97 | Supply and fixing solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and on and including PVC frame as per specifications and drawing, complete all as specified and directed. |
| 98 | Supply and fixing steel rolling shutter gear operated type with bevel gear box and crank handle, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or manual type complete all as specified and directed. |
| 99 | Supply and fixing Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 100 | Supply and fixing Ball bearing for rolling shutters all included complete all as specified and directed. |
| 101 | Amount of credit of Rs. 119048.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender