Tender For Special Repair To Certain Living-In Accn At Af Stn Bhisiana Under Ge (Af) Bhisiana
Tender Value
1.44 Crore
Estimated cost
Bid Submission
17 Oct 2026
14 days left
EMD
2.19 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Certain Living-In Accn At Af Stn Bhisiana Under Ge (Af) Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer in Charge. |
| 2 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 3 | Material and Labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 4 | Material and Labour rendering 5mm thick in CM (1:3) on fair faces of concrete surfaces as in celling finished fair and even without using extra cement complete all as specified and directed by Engr-in-charge. |
| 5 | Material and labour for rough cast plaster on brick wall consisting under coat of cement and sand mortar (1:4) not less than 10mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even, complete all as specified & directed by Engr-in-charge. |
| 6 | Material and labour for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-charge. |
| 7 | Material and labour for Complete removal of existing treatment and preparation of old plastered / unplastered surfaces of walls/parapats and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-charge. |
| 8 | Material and labour for prepration of new plastered surfaces of Ceiling and applying three coats of white wash on Ceiling ,complete all as specified and directed by Engr-in-charge. |
| 9 | Material and labour for prepration of old plastered surfaces of Ceiling and applying one coats of white wash on Ceiling ,complete all as specified and directed by Engr-in-charge. |
| 10 | Material and labour for prepration of new plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed by Engr-in-charge. |
| 11 | Material and labour for prepration of old plastered surfaces of walls and applying one coats of white wash ,complete all as specified and directed by Engr-in-charge. |
| 12 | Material and labour for Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper acrylic/distemper oil emulsion acrylic, white or tinted over and including a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material and labour for Complete removal of existing treatment and preparation of old plastered surfaces of walls and applying two coats of Oil bound distemper acrylic /distemper oil emulsion acrylic , white or tinted over and including a priming coat on wall surfaces complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material and labour applying 1-2 mm thick wall care putty on walls, including making surface even and smooth using sand paper before applying Priming coat, complete all as specified and directed by Engr-in-charge. |
| 15 | Demolition of cement concrete unreinforced of any description in any position not exceeding 150 mm thick (below or above ground level), complete all as specified and as directed by Engineer-in-charge. |
| 16 | Material and labour for hardcore of broken bricks of gauge n exc. 63 mm , deposited , spread, levelled and compacted in layers n exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection finishing cement concrete surface even and fair without using extra cement with and including making construction joint at a interval not exceeding 3.00 m and at each corner and filled with sealing compound with grade A(normal) in 25/30 , complete all as specified and as directed by Engr-in-charge. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specifed and directed by Engr-in-charge. |
| 19 | Material and labour for 25 mm thick cement concrete Type B1(1:2:4) (20 mm graded stone aggregate), as in sub base of floor , complete all as specified and directed by Engr-in-charge. |
| 20 | Material and labour for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) for laying floor finishes complete all as specified and directed by Engr-in-charge. |
| 21 | Material and labour for Glazed ceramic coloured tiles in vertical surface 350x250x7 mm / 450x350x7mm thick including 10mm thick cement plaster rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr-in-charge. |
| 22 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed by Engr-in-charge. |
| 23 | Material and labour for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick screed bed of CM1:4 including rubbing and polishing complete all as specified and directed by Engr-in-charge. |
| 24 | Material and labour for machine cut kota stone slab 14-16 mm thick in riser of steps ,skirting, dado and pillar laid over cement screed and cement slurry including 10mm thick cement plaster 1:3 CM to receive kota stone and jointed rubbing and polishing complete all as specified and directed by Engr-in-charge. |
| 25 | Material and labour for Granite stone (of any Type) work table rubbed and polished 18-20 mm thick machine cut,in steps, jams,pillars,window cills,cooking platforms and like laid and bedded over 15 mm thick cement mortar in CM(1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge. |
| 26 | Rounding the edge of stone slabs one edge such as in steps, cooking platforms, and the other similar situation , complete all as specified and directed by Engr-in-charge. |
| 27 | Material and labour for old/existing granite/ kota stone polishing and rubbing surface complete all as specified and directed by Engr-in-charge. |
| 28 | Demolition of cement concrete (unreinforced) exc 15 cm thickness but above ground floor, sunken floor, complete all as specified and directed by Engr-in-charge. |
| 29 | Material and labour for 15 mm thick rendering in cement mortar (1:3) as in sunken portion walls and floor,mixed with water proofing compound 3% by weight of cement, finishing surfaces even & smooth without using extra cement complete all as specified and as directed by Engr-in-charge.Note :- water proofing compound shall be measured and paid under appropriate item of this BoQ |
| 30 | Supplying only integral water proofing compoung, mixed as per instruction given over it, complete all as specified and directed by Engr-in-charge. |
| 31 | Material and labour for bitumen hot blown any grade, applied hot,in two coats to concrete surfaces at the rate of 1.5 Kg per Sqm per coat, including cleaning of surfaces, complete all as specified and directed by Engr-in-charge. |
| 32 | Material and labour for laying 50 micron polythelene film, black in floors of sunken, complete all as specified and directed by Engr-in-charge. |
| 33 | Material and labour for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in filling of sunken floor and mass concrete complete all as specified and as directed by Engr-in-charge. |
| 34 | Material and labour for 50 mm dia GI Spout pipe fixed in sunken floors by means of cutting holes in wall fixed and beded in cement mortor/PCC (1:2:4) and making good the disturbed portion of wall including taking down old unserviceable pipe complete all as specifed and directed by Engr-in-charge. |
| 35 | Taking down soil, PVC pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-neck,etc. including removal from site (measured over all as fixed along the centre line over fittings and accessories) complete all as specifed and directed by Engr-in-charge. |
| 36 | Supply and fixing 150 mm bore PVC (SWR) pipes (Medium duty) single socketed in any length with rubber ring joints fixed to walls/floor with and including stack clamps, nut bolts etc complete all as specifed and directed by Engr-in-charge. |
| 37 | Supply and fixing 150 mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engr-in-charge. |
| 38 | Supply and fixing in repair stack clamp for 150 mm bore pipe out of 50 mm by 5 mm flat iron and 16 round round iron stay.including bolt and nuts and securing ends of stay to walls or roof complete all as specified and directed by Engr-in-charge.Note: This item is to be executed independently and not to be measured under item No. 36,39 and 42 |
| 39 | Supply and fixing 110 mm bore PVC (SWR) pipes (Medium duty) single socket in any length with rubber ring joints fixed to walls/floor with and including stack clamps, nut bolts etc complete all as specified and directed by Engr-in-charge. |
| 40 | Supply and fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engr-in-charge. |
| 41 | Supply and fixing 110mm PVC (SWR) branch piece, single (single 'Y'/'T') equal or unequal complete all as specified and as directed by Engr-in-charge. |
| 42 | Supply and fixing 75 mm bore PVC (SWR) pipes (Medium duty) single socketed in any length with rubber ring joints fixed to walls/floor with and including stack clamps, nut bolts etc complete all as specified and as directed by Engr-in-charge. |
| 43 | Supply and fixing 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engr-in-charge. |
| 44 | Supply and fixing 75mm PVC (SWR) branch piece, single (single 'Y'/'T') equal or unequal complete all as specified and as directed by Engr-in-charge. |
| 45 | Supply and fixing in repair stack clamp for 75 mm bore pipe out of 50 mm by 5 mm flat iron and 16 round round iron stay.including bolt and nuts and securing ends of stay to walls or roof , complete all as specified and directed by Engr-in-charge.Note: This item is to be executed independently and not to be measured under item No. 36,39 and 42 |
| 46 | Supply and fixing in repair stack clamp for 100 mm bore pipe out of 50 mm by 5 mm flat iron and 16 round round iron stay.including bolt and nuts and securing ends of stay to walls or roof , complete all as specified and directed by Engr-in-charge.Note: This item is to be executed independently and not to be measured under item No. 36,39 and 42 |
| 47 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed by Engr-in-charge. |
| 48 | Material and labour 15 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors , complete all as specified and directed by Engr-in-charge. |
| 49 | Fixing only 15 mm dia steel tubes any grade to walls and ceilings or laying in floors, including new fittings as required complete all as specified and directed by Engr-in-charge. |
| 50 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-charge. |
| 51 | Material and labour 20 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-charge. |
| 52 | Fixing only 20 mm dia steel tubes any grade to walls and ceilings or laying in floors, including new fittings as required complete all as specified and directed by Engr-in-charge. |
| 53 | Cutting chases, pining in making good to facing where required and pointing in cement mortar 1:3 for concealed water tubing , cutting not exc 10 cm girth , complete all as specified and directed by Engr-in-charge. |
| 54 | Dismantling PVC water tanks Exceeding 500 Ltr and n exc 1000 Ltr and removal to store complete all as specified and directed by Engr-in-charge. |
| 55 | Supply and fixing 1000 ltrs capacity rotational moulded polythelene water storage tank three layered white colour (cylindrical vertical with closed top) hoisted and fixed in positions including necessary fittings complete all as specified and directed by Engr-in-charge. |
| 56 | Material and labour for 20mm Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed as in repairs,complete all as specified and directed by Engr-in-charge. |
| 57 | Material and labour for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed Screwed both ends for iron pipes or for union and fixed in repair to 20mm dia of pipe,complete all as specified and directed by Engr-in-charge. |
| 58 | Material and labour for Vitreous china squatting pan , 'Orissa' pattern, size 580 x 440 mm white , with integral foot rests complete including provision of lime concrete bedding fixed as in repairs, complete all as specified and directed by Engr-in-charge. |
| 59 | Supply and fixing in repair PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-charge. |
| 60 | Supply only PVC (SWR) 'P/S’ trap 100 mm bore complete all as specified and directed by Engr-in-charge. |
| 61 | Supply and fixing in repair vitreous china urinal bowl type (back or corner wall type) half stall complete including providing and fixing plugs bedding urinal agianst in wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement, fixing automatic flushing cistern with brackets flush pipe, grating and Union for discharge pipe complete all as specified and directed by Engr-in-charge. |
| 62 | Supply and fixing in repair china wash down water closet padestal pattern white excluding flush pipe and fix to position, including seat cover and connection to drain etc all as specified as directed by Engr-in-charge. |
| 63 | Supply and fixing in repair Health faucet (ABS Body) mild steel pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-charge. |
| 64 | Supply and fixing in repair Toilet paper holder of stainless steel fixed to walls complete all as specified and directed by Engr-in-charge. |
| 65 | Supply and fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass corner shelf 12cm wide with chromium plated bracket guard and CP railing 60cm long complete all as specified and directed by Engr-in-charge. |
| 66 | Supply and fixing in repair 10 litre capacity PVC valveless , syphonic action type , flushing cistern, low level ,white, with inlet, ball valve, float and handle,complete with flush pipe of polythelene of low or high density or PVC 32 mm dia , including brackets / fastening assesories complete all as specified and as directed by Engr-in-charge. |
| 67 | Supply and fixing in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers incl glass self assembly complete all as specified and as directed by Engr-in-charge. |
| 68 | Supply and fixing in repairs white colour viterous china wash basin oval type (18 x13x7 inch size) including brackets 32mm dia CP waste coupling, waste pipe , short connection completed in all specified and directed by Engr-in-charge. |
| 69 | Supply and fixing in repair CP Brass chromium plated bottle traps 32 mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap, complete all as specified and as directed by Engr-in-charge. |
| 70 | Supply and Fixing in repair wash hand basin Brass CP mixture 15mm bore for mixing hot and cold water screwed down for 15 mm iron pipe and fixed , complete all as specified and directed by Engr-in-charge. |
| 71 | Supply and fixing in repair 15 mm dia bore CP angular stop cock/angle valve with wall flange cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed by Engineer-in-charge. |
| 72 | Supply and Fixing in repair 15 mm dia bore CP concealed stop cock copper alloy chromium plated with long shank , fancy type,screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed by Engineer-in-charge. |
| 73 | Supply and Fixing in repair PVC connections 15 mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engr-in-charge. |
| 74 | Supply and Fixing in repair PVC connections 15 mm size with PTMT nuts of length 600 mm,complete all as specified and directed by Engr-in-charge. |
| 75 | Supply and Fixing in repair, 15 mm dia Bib taps , fancy type Chromium plated , screwed down , screwed for iron pipe or for brass ferrule.complete all as specified and directed by Engr-in-charge. |
| 76 | Supply and Fixing in repair, brass CP Wall mixer, 15 mm bore, for mixing hot and cold water , screwed down for iron pipe and fixed ,.complete all as specified and directed by Engr-in-charge. |
| 77 | Supply and Fixing in repair, Brass Chromium plated shower rose 125 mm size with or without swivel joints,including fixing to steel pipe or union complete all as specified and directed by Engr-in-charge. |
| 78 | Supply and Fixing in repair, stainless steel soap dish ,complete all as specified and directed by Engr-in-charge. |
| 79 | Supply and Fixing in repair, Brass CP tubular towel rail of 20 mm dia, D type ,60 CM long between flange complete all as specified and directed by Engr-in-charge. |
| 80 | Suply and Fixing in repair coat hooks of six pegs made out of stainless steel 45 cm long (as per sample) , complete all as specified and directed complete all as specified and directed by Engr-in-charge. |
| 81 | Taking down Chowkhats or frames (door/window) of any type not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charge. |
| 82 | Taking down chowkats & shutters without taking off shutters from the frame, size of opening exc. 1.50 sqm but not exc 4 sqm each. complete all as specified and as directed by Engr-in-charge. |
| 83 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engr-in-charge.Note: 1. M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid for separately under respective items of this BoQ. Note:2. For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 84 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engr-in-charge. Note: 1. M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid for separately under respective items of this BoQ. Note:2. For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 85 | Supply and fixing Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed by Engr-in-charge. |
| 86 | Supply and fixing 35mm thick plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces using 2nd class Hard wood as in rail and style. The size of rail and style as per IS-1003 (part – I), kiln seasoned and chemically pressure treated, complete all as specified and directed by Engr-in-charge. |
| 87 | Supply and fixing 35mm thick glazed and skelton shutter IInd class hard wood ,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of member of shutters as specified in SSR part-1 , section 8 , clause 8.24(a) . complete all as specified and directed by Engr-in-charge. |
| 88 | Supply and fixing 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as specified and as directed by Engr-in-charge. |
| 89 | Supply and fixing 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-charge. |
| 90 | Supply and fixing 150 Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-charge. |
| 91 | Supply and fixing 300 mm aluminium alloy, anodised , sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed ,complete all as specified and directed by Engr-in-charge. |
| 92 | Supply and fixing floor door stopper of size 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floors fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 93 | Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 94 | Supply and fixing in repairs steel window/ventilator of box section having 1.25 mm thick CRC sheet frame with double shutter inside gauged shutter and outside glazed shutter with one nos steel handle in each shutter,one nos peg stay in each shutter ,complete with glazing bars and 08 Nos of 10 x 10 mm square guard bars in equal spacing, devoited or welded as per sample incl one coat of red oxide primer all as specified and directed.( The rates includes 4 mm thick plain sheet glass and galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and 2 coat of synthetic enamel paint over a coat of zinc chrome primer) Note : The design of window to be facilitated by cooler fixing provision where ever required complete all as specified and directed by Engr-in-charge. |
| 95 | Supply and fixing galvanized stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple complete all as specified and directed by Engr-in-charge. |
| 96 | Supply and fixing in repairs galvanized stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple complete all as specified and directed by Engr-in-charge. |
| 97 | Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete all as specified and directed by Engr-in-charge. |
| 98 | Supply and fixing sheet glass 4mm thick ordinary quality and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed by Engr-in-charge. |
| 99 | Dismantling brick tiles or terracing tiles single layers on roof complete all as specified and directed by Engr-in-charge. |
| 100 | Demolition of mud in roofs, any thickness including plastering/pcc padding and leaping (where full thickness removed or only a part thereof) complete all as specified and directed by Engr-in-charge. |
| 101 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including dismantling existing membrane complete all as specified and as directed by Engr-in-charge. |
| 102 | Material and labour for brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and as directed by Engr-in-charge. |
| 103 | Material and labour for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor, roof etc complete all as specified and directed by Engr-in-charge. |
| 104 | Material and labour for providing cement concrete type BO (1:2:4) 12.5 mm graded stone aggregate for providing slope, maintain level , roof kerbs or mud stops rounded or chamfered edges complete all as specified and directed by engr-in charge |
| 105 | Material and labour for 10 mm thick cement screed bed or beding layer / plaster in cement (1:4) mixed with water proofing compound on concrete roof surface, complete all as specified and directed by Engr-in-charge. |
| 106 | Material and labour for APP based polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with forced application over roof surface with a coat of hot blown bitumen conforming to IS-3384-1965 of grade 85/25 @ 1.2 kg/Sqm at bottom of the membrane as bonding material, complete all as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge. |
| 107 | Demolition of Brickwork or stone/ boulder masonary, built in cement mortar or cement lime mortar.complete all as specified and directed by Engr-in-charge. |
| 108 | Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6 m mean radius , buit in cement mortar (1:6), complete all as specified and directed by Engr-in-charge. |
| 109 | Material and labour for Chipping of slab/ columns/ beams/ chajjas/ parapet/roof projection/balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brushes etc complete all as specified and directed by Engr-in-charge. |
| 110 | Material and labour for Cleaning & applying rust remover in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 6-8 sqm/ltr not less than 50 microns dft with Sika friazinc R or equivalent to reinforcement surface as per manufacturer’s instructions including all scaffolding , machinery, tools tackles and clearing of debris complete all as specified and directed by Engineer-in-Charge. |
| 111 | Material and labour for applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified mortar or micro concrete with two coats of Sikadur 32 LP (EPOXY BONDING AGENT) NO SBR MATERIAL IS TO BE USED. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete complete all as specified and directed by Engineer-in-Charge. |
| 112 | Material and labour for applying to the damaged concrete portion of slab/ columns/ beams/ chajjas/ parapet /roof projection/ balcony / staircase with single component, fiber reinforced, dual shrinkage- compensated thixotropic, cementitious patch Repair Mortar SIKA MONOTOP 122F (having the technical parameters mentioned in material specifications) capable of applying an average up to 20-25mm thick in single layer initially by hand and finishing with troweled carefully compacting the same around the rebar and finishing to bring it in line with existing concrete surface with an average specified thickness complete all as specified and directed by Engineer-in-Charge. |
| 113 | Material and labour for providing pourable, shrinkage compensated, free flowing and self-compacting superior performance Micro Concrete SIKACRETE 145 factory design with selected cement, aggregate and other chemicals. Recommended water and coarse aggregate maximum 15% of bag to be added at site as per manufacturer instruction. Product should strictly meet the requirement of Compressive strength @28 days ~45 N/mm2 (ASTM C109)/ Flexural strength @28 days~7 N/mm2 and Tensile adhesion strength @≥ 2 N/mm2 (28 days, +30 °C) (EN 1542) or as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine etc including leak proof shuttering/form work/scaffoldings as per manufactures's instructions complete all as specified and directed by Engineer-in-Charge. |
| 114 | Demolition of reinforced cement concrete of any description and in any position, cut as required to facilitate demolition, complete all as specified and directed by Engr-in-charge. |
| 115 | Supply and fixing Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated in Fe-290 (Gde E165) etc complete all as specified and as directed by Engr-in-charge. |
| 116 | Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. |
| 117 | Material and labour for preparation of new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer exposed to view surfaces complete all as specified and as directed |
| 118 | Material and labour for treating the soil under plinth protection at the rate of 5 ltr of emulsion per square meter of surface area complete all as specified and directed by Engineer-in-Charge |
| 119 | Material and labour for treating the soil along with external perimeter of building at the rate of 2.25 ltr of emulsion per meter of the perimeter wall complete all as specified and directed by Engineer-in-Charge. |
| 120 | Excavation in trenches not exc 1.5 mtr wide and not exceeding 1.5mtr depth for foundation in soft/loose soil & getting out complete all as specified and as directed by Engr-in-charge. |
| 121 | Returning filling in incl spreading, levelling, watering & well ramming in layers not exc 25cm thick for soft/loose soil complete all as specified and as directed by Engr-in-charge. |
| 122 | Removing excavated material at a distance of 50 m but n.exc 250m and depositing where directed at a lavel .exc 1.50 mtr above the starting point. |
| 123 | Demolition and breaking up of 150 mm dia sewage/ drain pipe with bed concrete set in cement mortar including removing debries out side MD land complete all as specified and as directed by Engr-in-charge. |
| 124 | Material and labour for H.D.P.E. Double wall corrugate (DWC) pipes (ISI marked) 150mm bore SN-8 class as per IS 16098 part II for nonpressure underground drainage and sewerage application with specials including coat of special O rubber ring couplers etc,laid in trenches directly on compacted earth to level/gradient jointing with appropriate class fittings as per manufacturer's instruction including jointing accessories and fittings such as jointing ring,couplers,bend,sockets and jointing material complete all as specified and directed by eng-in-charge. |
| 125 | Supply and fixing Mild steel TMT bars 8mm dia & over cut to length, bent to shape required including crancing, bending spirally for hooping complete all as specified and as directed by Engr-in-charge. |
| 126 | Material and labour for precast cement concrete Type B1 (1:2:4) using 20 mm graded stone aggregate as in cover slabs for manholes etc, set in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 127 | Demolition of cement concrete (unreinforced) in any description and in any position not otherwise specifically provided for including removing debries out side MD land complete all as specified and as directed by Engr-in-charge. |
| 128 | Material and labour for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate in surface channels of drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and as directed by Engr-in-charge.(Note:- Forming fair finished channel shall be measured and paid for separately). |
| 129 | Material and labour for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms , moulds mitred/stopped ends etc complete all as specified and as directed by Engr-in-charge. |
| 130 | Supply and fixing GI wire 4mm dia and above for hanging cloth and hanging with turnbuckles(wire tighteners) required as per site complete all as specified and directed by Engineer-in-Charge |
| 131 | Supply and Fixed in repair MS powder coated Curtain Rods 18 to20 mm bore over doors and windows , with fixing MS powder coated brackets,including screws,rawl plug ,and PVC powder coated fineals / fency type end bulbs at each end of curtains rod, any colour etc complete all as specified and as directed by Engr-in-charge. |
| 132 | Taking down carefully copper/ aluminium point wiring (light fan socket or power) complete along with fittings such as switches, ceiling roses, Pendants regulators Tube fittings and other Kits & fittings/conduit from surface /wall . Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface. |
| 133 | Material and Labour for Point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sq.mm, single core, PVC insulated,unsheathed cable with multistranded copper conductor with ISI mark FRLS grade, conforming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc, including GI terminal boxes 1.6 mm thick with 3 mm thick Hylam Sheet cover having necessary cutting for fixing switches/ sockets including 1.5 Sq.mm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly for:- |
| 134 | (a) One light/fan point controlled by one 1-way switch |
| 135 | (b) One 3/5 pin socket outlet, 5 Amp on independent board |
| 136 | (c) One 3/5 pin socket outlet, 5 Amp on same board |
| 137 | Material and labour for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable as earth continuity conducter to common earth and connected to earth dolly, complete all as specified and directed by Engineer in Charge.Note: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item. |
| 138 | Supply and fixing in repair Switch Modular type, 6 Amp, 240 Volts , one way complete all as specified and as directed by Engr-in-charge. |
| 139 | Supply and fixing in repair Switch Modular type, 16 Amp,240 Volts , one way complete all as specified and as directed by Engr-in-charge. |
| 140 | Supply and fixing in repair of 2/3 pin combined Socket outlet, Modular type, 6 Amp complete all as specified and as directed by Engr-in-charge. |
| 141 | Supply and fixing in repair of 2/3 pin combined Socket outlet, Modular type, 6&16 Amp complete all as specified and as directed by Engr-in-charge. |
| 142 | Supply and fixing in repair of Fan regulator, modular type 120 W-2 Module electronic step type complete all as specified and as directed by Engr-in-charge. |
| 143 | Supply and fixing in repair of modular ceiling rose 65x17mm three terminals after dismantling old one. complete all as specified and as directed by Engr-in-charge. |
| 144 | Supply and fixing in repair BLDC ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor. complete all as specified and as directed by Engr-in-charge. |
| 145 | Supply and fixing in repair LED lights fitting 1x 20W, 220V,AC high efficiency decorative box type with driver, holder including LED tube light complete with all accessories pre-wired and connecting electrically with ceilling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site complete all as specified and directed by Engineer-in-charge . |
| 146 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including complete with all accessories pre-wired and connecting electrically with ceilling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site complete all as specified and directed by Engineer-in-charge . |
| 147 | Supply and fixing in repair exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed by Engineer-in-charge. |
| 148 | Supply and fixing in replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 149 | Supply and fixing in repair MCB SP 6 to 32 Amps, 240 volts curve 'C',breaking capacity 10KA, complete all as specified and as directed by Engr-in-charge. |
| 150 | Supply and fixing in repair MCB SPN 32 /40 Amps, 240 volts, curve 'C', breaking capacity 10 KA, complete all as specified and as directed by Engr-in-charge. |
| 151 | Supply and fixing in repair sheet metal enclosures DB Double door type 8 way SPN 240 volt including 200 Amps rated bus bar rated IP-65 with neutral link complete all as specified and as directed by Engr-in-charge. |
| 152 | Supply and fixing in repair MCCB, three pole, 415 volts, 125 Amps , curve 'C', breaking capacity 25 KA, complete all as specified and as directed by Engr-in-charge. |
| 153 | Supply and fixing in repair sheet metal enclosures DB Double door Verticle distribution type, 04 way, TPN DB , IP43, 415V & suitable for MCCB TP as incomming including shruded neutral bar & Pan assembly with earthing terminal as provided by manufacturer. complete all as specified and as directed by Engr-in-charge. |
| 154 | Supply and fixing in repair Single pole and neutral enclosure with a two pin and earth Plug and socket complete with provision of one single pole MCB 20 Amp SP MCB C Curve 10 KA IP-65 complete all as specified and as directed by Engr-in-charge. |
| 155 | Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc complete all as specified and as directed by Engr-in-charge. |
| 156 | Supply and fixing in replacement LED street light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing along with prismatic polycarbonate modular secondary lens optics with IP 66 ingress protection . 4KV in-built and 10 KV external surge protection with top opening driver cover for easy maintenance with efficacy not less than 120 lm/W heat resistant. The LED driver shall be of isolated type with Costant Current Constant Voltage topology to ensure optimum driving of LEDs. The LED streetlight shall have power factor more than 0.95. The optical compartment shall be covered with heat resistant toughened glass for safety. LED street light shall be of Integral type complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete all as specified and directed by Engineer-in-charge |
| 157 | Supply and fixing in replacement street light GI pipe bracket 32mm dia 1.50metre length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc.complete all as specified and as directed by Engr-in-charge. |
| 158 | Supply and fixing in replacement of wall mounting 2 Watt study lamp fitting including luminaire sleek design & high efficiency for wall and surface mounted applications all as specified and directed by Engineer-in-charge. complete all as specified and as directed by Engr-in-charge. |
| 159 | Material and labour for disconnecting ceilling fan connection and taking down ceilling fan complete all as specified and directed by Enginer-in-Charge. Note :- Unsv ceilling fans to be handed over to AGE E/M store |
| 160 | Taking down ceiling fan of any descrptions, servicing and repairs of fans as required, fixing back, connecting and testing the fan for its satisfactory function including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) complete all as specified and as directed by Engr-in-charge. |
| 161 | Taking down exhasust fan of any descrptions, servcing and repairs of fans as required, fixing back, connecting and testing the fan for its satisfactory function including making good the disturbed surface and matching the colour of wall with the existing colour wash/paint/distemper wherever required (as per the existing ) complete all as specified and as directed by Engr-in-charge. |
| 162 | Material and labour for making provision for fixing exhaust fan bore of dimensions and making good the surface including plaster and paint to match with the existing surface complete all as specified and as directed by Engr-in-charge. |
| 163 | Material and labour for disconnecting geyser/water heater connection complete all as specified and directed by Enginer-in-Charge. |
| 164 | Material and labour for re-fixing geyser/water heater alongwith all electric and water connection complete as specified and directed by Enginer-in-Charge. |
| 165 | Dismantling / Taking down existing unserviceable sub main wiring from batten / conduit of any size all as directed. Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash/ distemper/ OBD to match with the existing surface / location. complete all as specified and as directed by Engr-in-charge. |
| 166 | Material and labour for submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as directed at site complete all as specified and as directed by Engr-in-charge.Note : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length). |
| 167 | Material and labour in replacement of submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 6 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site complete all as specified and as directed by Engr-in-charge.Note : Two runs of 6 sqmm cable alongwith one run of 6 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length). |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender