Tender For Special Rep To Bldg No T-25 (1,2&3) At Old Si Lines, Hamid Enclave Bairagarh Under Ge Bhopal
Tender Value
35.65 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
8 days left
EMD
71500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Rep To Bldg No T-25 (1,2&3) At Old Si Lines, Hamid Enclave Bairagarh Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge |
| 3 | S&F Tubes 15mm dia, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old GI/PVC pipes etc complete all as specified and as directed |
| 4 | S&F Tubes 20 mm dia, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old GI/PVC pipes etc complete all as specified and as directed |
| 5 | M& L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed |
| 6 | M&L for vitrified ceramic tiles light shade 9-10 mm thick (square/rectangular) polished, of any shade area of each tiles exc 0.42 sqm but not exc 1 sqm each, in floors etc fixed over and including over Screed bed or beding layer of cement mortar 15mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 7 | M&L for vitrified ceramic tiles light shade 9-10 mm thick (square/rectangular) polished, of any shade area of each tiles exc 0.42 sqm but not exc 1 sqm each, in vertical surface/skirting etc fixed over 10mm thik cement mortar rendering set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 8 | M&L for Non skid coloured Ceramic tiles 7-8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floor etc fixed over Screed bed or beding layer of cement mortar 15mm thick in CM 1:6 set jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 9 | M&L glazed coloured ceramic tiles in vertical surfaces with matching highlighter 450x300x7-8mm thick fixed over 10mm thik cement mortar rendering jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete all as specified and directed. |
| 10 | M&L for heavy duty Parking /outdoor tiles minimum 10mm thick (square/rectangular) area of each tiles not exc 0.11 sqm, in floors and skirting set and jointed in neat cement slurry and fixed over 15mm thick screed bed in CM 1:4 incl demolition of old tiles all as specified and directed. |
| 11 | M&L for granite tiles of 15-18 mm thick on vertical surface such as skirting, dado, steps, wash basin table top, flooring, kitchen slab, machine cut beddded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including rendering 15 mm thick back coat in CM (1:6) including Demolition old stone slab and tiles complete all as specified and directed. |
| 12 | S&F in reapir 18mm plywood grade BWR, type BB fixed with screws to timber frame work including dismantling old boarding complete all as specified and directed. |
| 13 | S&F in reapir 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed. |
| 14 | S&F 100 mm Stainless steel handle, cast type, polished bright complete all as specified and directed. |
| 15 | S&F Cabinet Hinges Soft Close SS 8 Crank complete all as specified and directed |
| 16 | S&F magnetic catcher for cupboard shutter complete all as specified and directed |
| 17 | S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 100mm complete all as specified & directed by Engineer -in -Charge. |
| 18 | S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 150mm complete all as specified & directed by Engineer -in -Charge. |
| 19 | S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 200mm complete all as specified & directed by Engineer -in -Charge. |
| 20 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. complete all as specified and directed. |
| 21 | S&F 4mm thick plain sheet glass ordinary quality nexc 0.50 sqm in each pane all as specified and directed. |
| 22 | S&F of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 23 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge |
| 24 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4.0 sqm each complete all as specified and directed. |
| 25 | S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65*100 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as directed |
| 26 | All as per item no 24.00 here-in-before but size 65x 125mm complete all as directed. |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as directed. |
| 28 | All as per item no 26.00 here-in-before but gauzed/ glazed shutter complete all as directed (Wiremesh wiil be measured and paid separately. |
| 29 | S&F solid PVC door frame(approved color) of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing complete all as specified and directed. |
| 30 | S&F Factory made solid panel PVC door shutter(approved color and pattern) 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed. |
| 31 | S & F stainless steel 100mm size Butt hinges, medium weight cold rolled, and fixed complete all as specified and as directed. |
| 32 | S&F Stainless steel 150mm long tower bolts of premium quality all as specified and directed. |
| 33 | S&F Stainless steel 150 mm size handles, fabricated type premium quality all as specified and directed. |
| 34 | S&F Stainless steel 300mm size sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, and fixing bolts of premium quality and fixed complete all as specified and directed |
| 35 | S&F 300mm Aluminium sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 36 | S&F in repair for vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including 32mm PTMT waste coupling and 32mm corrugated waste pipe complete all as specified and as directed. |
| 37 | S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing cistern and flush pipe) all as specified and directed. |
| 38 | S&F in repair CP swan neck wash basin mixutre 15mm dia, mixing hot & cold water, fancy type, cast copper alloy, screwed down high pressure, screwed for iron pipe etc complete all as specfied and directed by engr in charge. |
| 39 | S&F in repair CP Health faucet( ABS Body) suitable for 15mm dia pipe with 1.25m long flexible steel tube and ABS wall hook incl making connections and fixed in position complete in all as specfied and directed by engr in charge. |
| 40 | S&F chromium plated grating doom 100 mm dia with waste hole all as specfied and directed. |
| 41 | S & F in repair 10 ltrs capacity PVC low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed. |
| 42 | S&F PVC connection 15mm size with PTMT nuts of length 600 mm fixing complete all as specified and directed by engr in charge. |
| 43 | S&F in repairs 15 mm CP Angle/stop cock cast copper alloy, screwed down high pressure screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 44 | S&F in repairs fancy type long body CP bib taps 15 mm dia (having weight not less than 0.575 kg as per SSR Part-I clause 18.15.1 ) cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule , complete all as specified. |
| 45 | M&L PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75mm bore complete all as specified and direcetd. |
| 46 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) |
| 47 | S&F PVC(SWR) pipes 75 mm bore single socketed in any length with rubber rings joints laid in floor or wall complete all as specified and direcetd. |
| 48 | S&F PVC(SWR) pipes 110 mm bore single socketed in any length with rubber rings joints laid in floor or wall complete all as specified and direcetd. |
| 49 | S&F PVC(SWR) bend of the following bore 75 mm, jointed with solvent cement complete all as specified and direcetd. |
| 50 | S&F PVC(SWR) bend of the following bore 110 mm, jointed with solvent cement complete all as specified and direcetd. |
| 51 | S&F PVC(SWR) junction single (single 'T') equal or unequal of the following bore 75 mm, jointed with solvent cement complete all as specified and direcetd. |
| 52 | S&F PVC(SWR) junction single (single 'T') equal or unequal of the following bore 110 mm, jointed with solvent cement complete all as specified and direcetd. |
| 53 | S&F PVC(SWR) vent cowl for following bore 75mm, jointed with solvent cement complete all as specified and direcetd. |
| 54 | S&F PVC(SWR) vent cowl for following bore 110mm, jointed with solvent cement complete all as specified and direcetd. |
| 55 | S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete. |
| 56 | S&F tubular towel rail chromium plated 20 mm dia D type 60 cm long between flanges complete all as specified and directed by engr in charge |
| 57 | S&F Chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union jointed with solvent cement complete all as specified and direcetd. |
| 58 | S&F in repairs Stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed. |
| 59 | S&F in repair 1mm thick stainless steel grade 304 plate rack complete assembeled set of (Size: 31 x 36 x 10 inch) fixed with screws as specified and directed |
| 60 | S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed. |
| 61 | S&F in repairs CP 15mm wall or Sink mixture for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 62 | S&F in repair 5mm thick corner glass shelf (CP bracket) of size not less than 225x 225mm with SS railing fixed with SS screws and PVC rawl plug all as specified and directed |
| 63 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 64 | S & F in repair for designer bevelled edge frameless looking mirror of selected quality glass of min 5mm thick fixed on wall with SS studd (04 Nos min) and screws with plug in required size complete all as specified and directed |
| 65 | S&F 450x350mm size PVC cabinet mirror of superior quality complete all as specified and directed. |
| 66 | M&L for rendering 15 mm thick on fair faces of brick/concrete surfaces cement plaster in CM (1:4) , finished even and smooth without using extra cement and with WPC as per manufacturer's instruction, including taking down of of existing old plaster complete all as specfified and directed. (Note:- WPC shall be measured and paid seperately) |
| 67 | M&L for 10 mm thick rendering in cement plaster 1:6 on other than fair face of brick/ concrete surfaces finished even and smooth without using extra cement including taking down old plaster and raking out joints complete all as specified and directed. |
| 68 | M & L Preparation of new plastered surface and applying two coat of exterior weather proof water base emulsion paint white/coloured over and including one coat of white cement based putty (where it is required) all as specified and directed by Engr-in-Charge. |
| 69 | M & L Preparation of new plastered surface and applying two coats of oil emulsion distemper over three coat of white cement based putty all as specified and directed. (Note : Putty shall be paid and measured separetely) |
| 70 | M&L complete removal of old decorated surface of wall and applying two coat of exterior weather proof water base emulsion paint white/coloured over and including one coat of white cement based putty (avg 3mm thick) all as specified and directed by Engr-in-Charge. Note : Putty shall be paid and measured separetely. |
| 71 | M&L complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and one coat of white cement based putty 1mm thick (average) complete all as specified and directed by Engr-in-Charge. |
| 72 | Demolition of concrete in ground floors and pavings (un reinforced) nexc 15 cm thickness (below or above ground level). |
| 73 | M&L for 75 mm thick , PCC 1:3:6 type C-2 using 20mm graded aggregate as in plinth protection complete all as specified and directed by Engr-in-Charge. |
| 74 | M&L fly ash brick work with modular 'B' bricks, straight or curved on plan to any radius in half brick thick walls using modular bricks build in CM 1:4 including Demolition all as specified and directed |
| 75 | M&L fly ash brick work with modular 'B' bricks in cm 1:6 using modular bricks straight or curved on plan to any radius including Demolition all as specified and directed. |
| 76 | S&F in repair 25mm stainless steel curtain rod (minimum 1mm thick) incl taking down old rods with fittings complete all as specified and directed. |
| 77 | S&F decorative type SS curtain rod bracket/ holder with designer cap of suitable for 25mm dia rod complete all as specified and directed. |
| 78 | S&F MS rolled section/tubular sections in purlin, cross, beam, rafter,posts etc. incl connected cleats, hold fasts etc of grade conforming to Fe 410-O or Fe 310-O all as specified and direcetd. |
| 79 | S&F MS wind ties for roof truss including necessary drilling bolting as riveting etc and similar work to FE 410-S or FE 310-S all as specified and direcetd. |
| 80 | Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to walls as directed. |
| 81 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (precoated AZ 150 micron) of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer including dismantling of old sheets fixed at any location complete all as specified and directed |
| 82 | All as per item No 80.00 here-in-before but plain sheeting, in ridges including dismantling of old sheets fixed at any location ompleted all as specified and directed. |
| 83 | M&L preparation of old painted surfaces of steel and iron surface of any description and applying two coats of synthetic enamel paint complete as specified and directed. |
| 84 | M&L for preparation of new steel surface of any description and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed |
| 85 | M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. |
| 86 | S&F Providing and laying 60mm thick rubber moulded factory made chamfered edge cement concrete glossy finish paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed |
| 87 | M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, sub base etc complete all as specified and directed |
| 88 | S&F anodised aluminium snap grid of size 600x600 mm frame work for false ceiling including dismantling of exiting false ceiling complete all as specified and directed. |
| 89 | S&F Exposed metal frame ceiling with PVC coated calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) |
| 90 | M&L for Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth beyond ; for foundation, etc. or for shafts, wells , cesspits, manholes, pier holes etc n exc 10 sqm on plan and not 1.5 m depth and getting out soft/loose soil complete as directed by Engr in charge. |
| 91 | Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed |
| 92 | Removal of excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed |
| 93 | M&L for reinforced concrete pipes, class NP-2, laid and jointed with collars of 200 mm bore of pipe complete all as specified and directed. |
| 94 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 95 | M&L Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed. |
| 96 | M&L for providing precast cement concrete louvres and jallies, 35mm thick (measured solid), using 1:2:4 type B0 using 12.5mm gradded stone aggregate including all mouldings but excluding frame complete all as specified and directed. |
| 97 | M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed. |
| 98 | M&L 50 mm thick Sand stone slabs in foothpath, sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4, complete all as specified and directed. |
| 99 | S&F rotational moulded polyethylene water storage tank color white 500 ltrs cap cylindrical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I incl dismantling of old broken water storage tank complete all as specified and directed. |
| 100 | S&F rotational moulded polyethylene water storage tank color white 1000 ltrs cap cylindrical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I incl dismantling of old broken water storage tank complete all as specified and directed. |
| 101 | Taking down carefully aluminium / copper point wiring with surface/ concealed PVC conduit or wooden batten ( light, fan, socket, bell or power ) including sunk in cast iron / pressed steel terminal boxes except fitting such as switches, ceiling roses, lamp holders, sockets, regulators, call bell, light fitting any sketch etc and making good disturbed surfaces of walls, floors etc including putty and one coat of similar paint to match the existing surface complete. |
| 102 | Dismantling/taking down of unserviceable old existing service /submain wire of any size all as specified and directed |
| 103 | Dismantling/taking down of unserviceable distribution boards with MCBs all as specified and directed. |
| 104 | M&L for concealed Point wiring One light point/fan point controlled by one switch, using approved color coding as per IS (Red, Black and Green forr singlle phase circuits), with multi-stranded copper conductor stranded copper conductor, 1.5 sqmm nominal cross sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, IS-694 marked with valid CML no., PVC conduit and conduit accessoriees on wall/roof/floor etc. ISI marked with valid CML No. (IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with metal sunken box, modular cover plate for fixing of modular switches, sockets and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following: |
| 105 | All as per ser item No 118.00 here-in-before but one socket outlet 5 pin, 5/6 amps on independent board controlled by one way switch complete all as specified and as directed. |
| 106 | All as per ser item No 118.00 here-in-before but one socket outlet 5 Amps controlled by one switch on the same board. complete all as specified and as directed. |
| 107 | All as per ser item No 118.00 here-in-before but with 2.5 sq mm multi stranded copper conductor cable for one 15 Amps socket outlet complete all as specified and as directed. |
| 108 | Supply and Fix modular socket 6A/16A - 2/3 pin combination for AC connection with MCB SP, 20A complete with metal sunken box and modular cover plate all as specified and as directed and directed by Engr in Charge as per site requirement all as specified and as directed and directed. |
| 109 | Material and labour in repairs for sub main wiring with two single core 10.0 sqmm multi stranded copper conductor, FRLS PVC insulated, unsheathed cable including rigid non metallic PVC conduit medium grade, ISI marked, 20 mm dia for sub main wiring including 10.0 sqmm FRLS PVC insulated and unsheathed stranded copper conductor as earth wire in concealed in wall of make & maching the existing surface make & maching the existing surface and making good to the disturbed surfaces to match the existing surfaces complete including taking down existing unserviceable submain of any size all as specified and directed.Note:- Two runs of 10.0 sqmm copper conductor cable, one run of 10.0 sqmm copper conductor and one run of PVC conduit will be measured as one unit. |
| 110 | Material and labour in repairs for sub main wiring with two single core 4.0 sqmm multi stranded copper conductor, FRLS PVC insulated, unsheathed cable including rigid non metallic PVC conduit medium grade, ISI marked, 20 mm dia for sub main wiring including 4.0 sqmm FRLS PVC insulated and unsheathed stranded copper conductor as earth wire in concealed in wall of make & maching the existing surface make & maching the existing surface and making good to the disturbed surfaces to match the existing surfaces complete including taking down existing unserviceable submain of any size all as specified and directed.Note:- Two runs of 4.0 sqmm copper conductor cable, one run of 4.0 sqmm copper conductor and one run of PVC conduit will be measured as one unit. |
| 111 | S & F Ding Dong bell, 50 Hz, AC, 240 volts, single pole complete all as specified and as directed. |
| 112 | S & F ceiling rose surface bakelight two to three terminal complete all as specified and as directed. |
| 113 | S & F Modular Bell push, 6Amp, 1 module 240 volt complete all as specified and as directed. |
| 114 | S & F Modular switch 1 way, 6A, 240 volts 1 module complete all as specified and as directed. |
| 115 | S & F Modular switch 1 way 16A, 240 volts 1 module complete all as specified and as directed. |
| 116 | S & F Modular Socket, 6A - 2/3 pin combined one module complete all as specified and as directed. |
| 117 | S & F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed. |
| 118 | S & F Modular Fan step regulator, 120W, 240 volts 2 module complete all as specified and as directed. |
| 119 | Supply and fixing Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 120 | S&F LED tube light fitting bright 10 watt, cool day light and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 121 | S&F LED tube light fitting bright 20 watt, slim elegant design. and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 122 | S&F LED tube light fitting two feet 10 watt, slim elegant design, 230 volt and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 123 | Supply and fixing in replacement factory made epoxy powder coated Distribution Board TP & N 4 ways ( VTPN MCCB DB ) and space for MCCB as incomer, with metal door ( IP-43 protection ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated Neutral Bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed.NOTE:- MCCB shall be measured and paid seperatly. |
| 124 | S&F in replacement MCCB 125 Amp, 3 Pole, breaking capacity 36 KA with complete electrical connections by appropriate size of copper lugs, complete all as specified and directed. |
| 125 | Supply and Fix for sheet metal enclosures for SPN DB's 240 volts, factory made double door flush type, IP-54 protection and all as per IS-8623, made from sheet metal 16way 200 Amps rated bus bar to be fixed with wall all accessories complete all as specified and as directed. |
| 126 | S & F MCB, single pole, 240 volts, 6 to 32 Amps 'C' series complete all as specified and as directed. |
| 127 | S & F in replacement MCB SP suitable for 240 volts, AC supply 63 Amps and rupturing capacity not less than 10KA complete all as specified and directed. |
| 128 | S & F in replacement MCB SPN suitable for 240 volts, AC supply 63 Amps, with rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. |
| 129 | M&L for earthing with glavanised steel earth plate elactrode 600x600x6.0 mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below ground leves) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Pt-I 1991 print and as directed.Note:- (i) Item of earthing includes cost of excavation, removing, PCC Chamber, 15mm bore 'medium grade' GI protection Pipe (7.5 Meters long) for earth lead any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of Engr-in Charge. |
| 130 | Supply and fixing LED Bldg/street light fitting 36 Watt, 230 V AC, outdoor type with high pressure die cast aluminum hosing with heat sink, surge protection upto 4 KV, IK 08 protection, PF>= 0.95, rated CCT 5700K and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection and GI pipe 40 mm dia, light grade for mounting bracket bent to shape 1.50 RM and fixing arrangement with two Nos of MS clamps set, nut bolts, washers of suitable size complete all as specified and directed. |
| 131 | Taking down/dismantling of storage type hot water Geyser of 50/35/25 litre capacity from different locations by disconnecting inlet/outlet connections and deposited to E/M office store yard all as specified & directed. |
| 132 | Taking down carefully serviceable/unserviceable exhaust fans of any size from its position, and deposited to E/M office store yard all as specified and directed. |
| 133 | Taking down carefully ceiling fans of any size from its position, and deposited to E/M office store yard all as specified and directed. |
| 134 | Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 135 | Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender