Tender For Providing Of Certain Minor Works At Af Stn Muradpur And Amritsar
Tender Value
9.05 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
9 days left
EMD
18105
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Certain Minor Works At Af Stn Muradpur And Amritsar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Sep-2026 | CORRIGENDUM NO 1 | Other | 12-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out all as specified and directed. |
| 2 | M&l for removal of excavated material in soft / loose soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed. |
| 3 | Returning,filling in trenches including spreading watering and well ramming in layers not exc 25cm thick in soft.loose soil complete all as specified and as directed . |
| 4 | Supply and depositing earth and filling in layers not exceeding 30cm including spreading , levelling , watering, well raming/rolling and finishing to the required size,shape etc n exc1.5 m high from the base complete all as specified and directed by Engr-in-Charge . |
| 5 | M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone aggr as in sub base/foundation all as specified and directed by engineer in charge. |
| 6 | M&L for 75 mm thick PCC 1:2:4 type B-2 using 40 mm graded crushed stone aggr as in floors, paths and mass concrete to be laid in alternate bays all as specified and directed by engineer in charge. |
| 7 | M&L for Reinforced cement concrete design mix M-25 using 20mm graded aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. |
| 8 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions. |
| 9 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 10 | S&F mild steel TMT bars 10mm dia and over cut to length bent to shape reqd, incl cranking bending spirally for hooping for col,hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia or securing with clips qty confirming to Fe-410W(Gde- E-250) or Fe-290(Gde-E-165) complete all as specified and as directed. |
| 11 | S& F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) all as specified and directed by engineer in charge . |
| 12 | S&F mild steel bolts purpose made with hexagonal or square head one end and screwed the other , or screwed both ends; each screwed end to be fitted with washers and one hexagonal nut exc. 90 cm long , having dia not exc 12mm all as specified and directed by EIC . |
| 13 | M&L MS plate(plain or chequred)channels,square cut or notched (ordinary and counter sunk)forming holes, without any attachment also fastening and fixing completeall as specified and directed by EIC. |
| 14 | M&L, Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and as directed. |
| 15 | Material and labour for 15mm thick cement plastering on fair faces in cm 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement upto height 12 mtr complete all as specified and directed by engineer in charge |
| 16 | Material and labour, preparing of newly plastered surfaces of wall and applying two coats of white wash complete all as specified and directed. |
| 17 | M&L for two coat synthetic enamel paint over a coat red oxide primer on new steel surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete all as specified and directed by Engineer-in-Charge. |
| 18 | M&L for supply and fixing 5mm thick rubber sheet with fabric backing or insert and plain coloured or marbled topping, matt or glossy,with ribbed or fluted topping laid in floors with approved adhesive all as specified and directed by Engr-in-Charge . |
| 19 | M&L for Demolition of cement concrete in any position and any description complete all as specified and directed by Engr-in-Charge. |
| 20 | M & L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring , finishing cement concrete surface even and smooth complete all as specified and directed by Engr-in-Charge. |
| 21 | Design, Supply, installation, testing and commissioning of CPRI Approved, Cubical type, floor mountedAPFC panelof 150 KVAR rating, Outdoor type factory fabricated made out of CRCA sheet of 3.0 mm thick fully enclosed and mounted on 50 x 50 x 6mm thick 600mm long leg with front and rear openable double door shutterdust and vermin proof complete with locking arrangement having a system of bus bars of Aluminiumof 500 Amps duly insulated and mounted on Epoxy/porcelain insulators in totally enclosed chamberwith three phase and neutral 415 volts AC system prewired with suitable copper wire PVC insulatedwith all control accessories, provision of suitable cable glands, duly powder coated of approved qualityover a coat of red primer with sufficient free space complete to include the following accessories in ser No 21.1:- |
| 22 | (a) 315 Amp 4 Pole 36 kA MCCB Adjustable Thermal & Fixed Magnetic, Icu = 100% lcs - 01Nos.(b) Digital Three Phase Ammeter - 01Nos.(c) Digital Three Phase Voltmeter - 01Nos.(d) R-Y-B Indicating Lamps - 01 Set.(e) 08 Steps Automatic Power Factor Correction Relay - 01 Nos.(f) 63 Amps 3 Pole MCB 10KA C-Curve with 25Kvar Capacitor Duty Contactor & 25Kvar Heavy-dutyCapacitor Bank - 05 Nos.(g) 25 Amps 3 Pole MCB 10KA C-Curve with 10Kvar Capacitor Duty Contactor & 10Kvar Heavy-dutyCapacitor Bank - 02 Nos.(h) 16 Amps 3 Pole MCB 10KA C-Curve with 5Kvar Capacitor Duty Contactor & 5Kvar Heavy-dutyCapacitor Bank - 01 Nos.Note: -The Panel manufacturer should have followed Govt. Approved Certificates:• CPRI Certificate not less than 2 yrs. Old.• CPRI Certificate for Temperature Rise for 4000A, 100kA (IS/IEC: 61439-1 & 2).• CPRI Certificate for Short Circuit (IEC-61439-1 & 2) withstand strength should be 70kA rms for 1.0Sec with intial peak of 154kApkFloor Mounted using angle iron 50 x 50 x 6mm frame (bottom portion of panel), grounded by PCC foundation with 1:2:4 type C1 with 20mm graded stone aggregate. The thimbles, ferrules and cable entry boxes with cable gland for connecting cables including locking arramgement, painting with two coat of synthetic enamel paint over a coat of red oxide primer complete as specified and directed. |
| 23 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 300 Sqmm 3.5 Core |
| 24 | Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender