Tender For Addition/Alteration To Iit Building Near Corps Hq Building And Certain Deposit Works At Bb Cantt, Srinagar.
Tender Value
9.55 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
15 days left
EMD
19100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Iit Building Near Corps Hq Building And Certain Deposit Works At Bb Cantt, Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cable, pipe etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil, complete all as specified and directed. |
| 2 | M & L for Plain Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation, filling and masss concreate, complete all as specified and directed. |
| 3 | M&L for Brick work with subclass B bricks, staright or curved on plan exc 6.00 mtr mean redius, biult in 1:6 cement mortar, complete all as specified and directed. |
| 4 | Returning filling in incl spreading leveling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed. |
| 5 | Removing of excavated soil not exceeding 50 M and depositing where directed at a level not exc 1.5 M above the starting point, complete all as specified and directed. |
| 6 | M & L for reinforced cement cocnrete Type B1 (1:2:4) (Nominal Mix) using 20 mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. |
| 7 | Mild steel(TMT bars) bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 8 | Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 9 | Formwork to sides and soffits of floor or roof beams, beam haunchings, Lintel beam, beams , girders, bressummers, lintels, cantilevers, shelves including supports, over-hangs, etc. also splays between floors and beams, etc, flat, rough finished surfaces of concrete, complete all as specified and as directed. |
| 10 | S&F anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame (Sliding or openable), glazed with 5.5mm thick tinted glass or ACP panel sheet including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size, including mortice lock vertical type of mild steel 4 levers of size 100mm, floor door stopper including fixing of powder coated aluminium decorative grill of size of mesh 75mm to secure glass wherever fixed etc as mentioned here in below, complete all as specified and as directed. |
| 11 | S&F Powder coated Anodised aluminium frame for partations of single groove section size 63.40 x 38.10 x x1.50 mm thick and double groove section size 63.50x 38.10x1.53mm thick including fixing of 5.5 mm thick tinted glass or Aluminium panel sheet with rubber packing complete with one or more rebates including joining cleat,complete all as specified and directed. |
| 12 | M & L for plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) 75 mm thick, as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2, complete all as specified and directed. |
| 13 | M & L for plain cement concrete type B-0, 1:2:4 (using12.50 mm graded crushed stone aggregate, 25 mm thick, for sub base of floors finished the surface even and fair without using extra cement, complete all as specified and directed. |
| 14 | M&L for vetrified tiles 9 to 10 mm thick dark shade (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in CM (1:4) for laying floor finishes, complete all as specified and directed. |
| 15 | M&L for vetrified tiles 9 to 10 mm thick dark shade (square/ rectangular) as in skirting/dado, wall, vertical serfaces etc. set and jointed in neat cement slurry and pointed in white or colour cement to match and iincluding 10mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 16 | M&L for Australlian wood panelling 10mm thick including 9mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats) and fixed, complete all as apecified and directed. |
| 17 | S&F aluminiun anodised snap grid ceiling of frame size 600x600mm, main Tee section of size 36.5mmx25mm x1.4 mm thick , cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders including 4mm thick E board ceiling HPSC fixed to aluminium frame complete as per manufacturer's instructions, complete all as apecified and directed. |
| 18 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars shutters (openable for windows); barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as apecified and directed. |
| 19 | M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer exposed to view surfaces, complete all as specified and directed. |
| 20 | M & L 15mm thick rendering on brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement , complete all as specified and directed. |
| 21 | M & L 15mm thick rendering on brick work or concrete surface in cm 1:4 to be finished even and smooth without using extra cement, complete all as specified and directed. |
| 22 | Material and labour for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 23 | Material and labour for Granite (of any Type) work table rubbed and polished 18-20 mm thick machine cut, in steps, jams, pillars, window cills, cooking platforms and like fixed over 10 mm thick cement mortar in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to macth with shade of granite , complete all as specified and directed. |
| 24 | Rounding the edge of stone slabs one edge such as in steps, cooking platforms, and the other simmilar situation , complete all as specified and directed. |
| 25 | M&L for plain cement concrete type B-2 1:2:4 (using 40mm graded crushed stone aggregete) as in foundation and mass concrete of fixing steel posts or other similar works, complete all as specified and directed. |
| 26 | S & F 3mm Aluminium composite panel (ACP) sheet of any colour fixing in wall penling, lacades, wall clading including fixing of necessary aluminium frame for fixing sheet and decorated bedding on joints and all corners edges of wall & all joints fill with colored silicon, complete all as specified and directed. |
| 27 | S&F 12 Inch Polished Stainless Steel letter 5mm thick (304 Grade) fixed on , complete all as specified and directed. |
| 28 | M&L for Making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes or heavy duty PVC box and duly fixed it concealed in wall or surface on wall and alongwith providing of back and face top covered plate frame or electro plated plastic laminated sheet for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc., complete all as specified and directed for the following:- |
| 29 | One light point / fan point wiring system controlled by one way switch, complete as all as specified and directed. |
| 30 | One 5 Amp socket outlet point wiring system fixed on independent board and controlled by one way switch, complete as all as specified and directed. |
| 31 | Description all as per serial item No 28 here-in-before, but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system, complete as all as specified and directed. |
| 32 | Supply & fixing of modular type switch 5/6 Amps 220 Volts AC,one module , complete as all as specified and directed. |
| 33 | Supply and fixing of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modula, complete as all as specified and directed. |
| 34 | Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module, complete all as spcified ad as directed. |
| 35 | Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modula, complete all as specified and directed |
| 36 | Supply and fixing of one/two modular type step type electronic fan regulator with having hum free step alongwith speed control know, complete as all as specified and directed. |
| 37 | Supply and fixing ceiling rose three terminals type made out of polycarbonate , isolated body complete all as specified and directed. |
| 38 | Supply and fix recessed/ceiling concealed mounted down lighter light fitting of round/Square flate shapes decorative type with high efficiency PMMA fiffuser soft glare free light with drivers & LED luminaire of rating capacity in 15 Watt to 18 Watt 220 volt AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed. |
| 39 | Supply and fixing of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete fitting, complete all as specified and directed. |
| 40 | Supply and fixing of LED street light fitting of rated capacity 35Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete light fitting set including providing of suitable dia of GI bracket and it to as per match/setting thefitting fixture base hole attechment system and including providing of suitable type of flate fexible two/three core cable and makong electric connection all as specified and directed. |
| 41 | Supply and fixing of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting chanel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection as required at sit, complete all as specified and directed. |
| 42 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 12 way type 220 volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection, complete all as specified and directed. |
| 43 | Supply and fixing of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed. |
| 44 | Supply and fixing of MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB, complete all as specified and directed. |
| 45 | Supply and fixing of MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed. |
| 46 | Supply and fixing of ceiling fan of size 1200 mm sweep min air delivery 210 CFM with BEE normns 5 star rating of single phase 220 Volt AC along with blade and down rod, complete all as specified and directed . |
| 47 | Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 4 Sqmm and 1 Run of 4 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall and making good all disturbed surfaces match to the existing surface, complete all as specified and directed. Note: 3 runs of 4 sqmm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 48 | Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 16 sqmm 2 core including laid in trenches or fixing on poles or passing through pipes, complete all as specified and directed. |
| 49 | M&L for locally available river sand in trenches 15 cm below cable and 8cm above / around UG cable for cable protection, in duct under and above the cables including punning around cable, complete all as specified and directed.Note: - Punned thickness shall only be measured and paid. |
| 50 | Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other, complete all as specified and directed. |
| 51 | Supply ,fix and testing of Voltage stabilizer for automatic operation, Voltage protection ,Display model ,three phase, naturally oil cooled, indoor type & designed for input variation between 300 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 50 KVA including suitable size of PCC Plinth and cover shed of Angle Iron and CGI sheet for protecton and proper covering, complete all as specified and directed amd having following specification :- |
| 52 | (i) Input voltage 300 volt to 480 volt(ii) Rated frequency 50 HZ(iii) Response time not to exceed 20 miles second(iv) No distortion in wave form(v) Efficiency more than 98 %(vi) Digital display Voltmeter /Ammeter with malfunctional meterProtection(i) Overload short circuit protection(ii) High & low voltage cut toff(iii) Bypass arrangment incase of emergency(iv) Single phase preventor &spike and surge protectionDigital indicators(i) Power indicator(ii) Voltage indicator(iii) Frequency meter(iv) Power factor indicator(v) Ammeter,Voltmeter,Temparature meter(vi) Phase sequence indicator(vii) Oil level indicator |
| 53 | Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 70 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes, complete all as specified and directed. |
| 54 | Earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with 32x6mm size GI strip as earth lead, by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender