Tender For Repairing Potholes Work In Patches Due To Excessive Rainfall On Bishnupur-Aishmali Road From Ch 9.00 Km To 10.00 Km Under Quality Control Sub Division No. I Of Nadia Highway Division No. Ii During The Year 2026-27
Tender Overview
Project Description
Tender for Repairing Potholes Work In Patches Due To Excessive Rainfall On Bishnupur-Aishmali Road From Ch 9.00 Km To 10.00 Km Under Quality Control Sub Division No. I Of Nadia Highway Division No. Ii During The Year 2026-27
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Sep-2026 | DATE CORRIGENDUM | Date | 01-Oct-2026 |
| 2 | 01-Oct-2026 | DATE EXTENSION | Date | 05-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Repairing Pot-holes with Bituminous Macadam(Grading - II, for compacted thickness of upto75mm) cum 1111.12 Filling Pot Holes with Bituminous Macadam using Mobile Hot Mix plant (6-10 TPH) with approved crushed aggregates of specified gradingpremixed with bituminous binder @3.4% by wt. of the total mix, transported to site and laid in the pot hole prepared before hand by cutting the edges to get a firm vertical face and by removing all the failed and loose materials including dust and applying tack coat evenly on the sides and on the surface as per specification, rolling the filled depression with 8-10 tonne smooth wheeled roller to achieve the desired compaction, including the cost and carriage of stone aggregates andbitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of all operational staff, quality control except the cost of tack coat complete as per direction of Engineer-in-charge. Payment to bemade on the basis of the loose net volume of the stone aggregates used in the work. |
| 2 | Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (MS) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet(Reference to MORT&H's specification clause 503). i)On bituminous surface @ 0.20kg- 0.3kg /sqm. |
| 3 | Providing, laying and rolling of open - graded premix surfacing of20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required leveland grades (Reference to MORT&H's specification clause 510). |
| 4 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference toMORT&H's specification clause 511) Providing and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. |
| 5 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender