Tender For Permanent Iron Fencing At Median Verge Garden, Main Carraige Way To Service Road Divider From 0.00 Kmp. To 6.150 Km. Of Kazi Nazrul Islam Avenue ( Vip Road ) In Connection With India Energy Week 2027 Under Barasat Highway Division No. - I
Tender Value
14.29 Crore
Estimated cost
Bid Submission
12 Oct 2026
9 days left
EMD
10 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Permanent Iron Fencing At Median Verge Garden, Main Carraige Way To Service Road Divider From 0.00 Kmp. To 6.150 Km. Of Kazi Nazrul Islam Avenue ( Vip Road ) In Connection With India Energy Week 2027 Under Barasat Highway Division No. - I In The District Of North 24 Parganas.
BOQ
| Sl. No. | Item Description |
| 1 | (A) Cost of Fencing Work : |
| 2 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work (Reference to MoRT&H's specification clause 304). In Ordinary soil by Manual Means (Depth upto 3 m) |
| 3 | Dismentling of FencingDismantling of barbed wire fencing/ wire mesh fencing including posts, foundation concrete, back filling of trenches & pit by manual means including disposal of dismantled material with all lifts and up to a lead of 1000 metres, stacking serviceable material and unserviceable material separately (Reference to MoRT&H's specification clause 202). |
| 4 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres (Reference to MORT&H's specification clause 202) By Mechanical Means Cement Concrete Grade M-15 & M-20 |
| 5 | Sand (Fine, Yellow) Filling in Foundation Trenches with good local sand free from earth not exceeding 150 mm compacted thickness including inundating each layer by profuse water and porking and rammimg layer by layer. Quality of sand is to be approved by the Engineer-in-charge.(Reference to MORT&H's specification 304). |
| 6 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days (Reference to MORT&H's specification 2100). |
| 7 | Supplying, fitting, fixing of New Metal Iron Fencing by M.S.structural works with hollow section (Square or rectangular shape) conforming to IS : 806-1968 & IS : 1161-1998) including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection etc. all complete as per drawing , design and direction of Engineer-in-charge. |
| 8 | Epoxy bonding of new concrete to old concrete (crack / spalling shall be sealed with epoxy injection / grouting coating of epoxy resin @ 0.80kg /sqm should be applied) (Reference to MORT&H's specification 2805) including all cost etc. as per direction of EIC. |
| 9 | Plain cement concrete PCC Grade M30 in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200) including cost of formwork. With Batching Plant, Transit Mixer and Concrete Pump. |
| 10 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. |
| 11 | Brick masonry work with 1st class full size bricks except when necessary to complete the bond in cement morter 1:3 in Sub-Structure complete, including thoroughly soaking the bricks in a tank filled with water for a minimum period of one hour prior to being laid, protecting the green structure from rain by suitable covering and with a minimum Seven days curing etc., but excluding pointing and plastering, as per drawing and Technical. Specifications.(Reference to MORT&H's specifications 1300 & 2200). |
| 12 | Plastering with cement mortar (1:3) on brick work in sub-structure complete all including raking out joints curing, etc as per Technical Specifications (Reference to MORT&H's specifications 1300 & 2200). |
| 13 | Providing and fixing at or near ground level precast cement concrete in kerbs (size: 410 mm x 310 mm x width 150 mm at bottom with circular nosing at top) (Nano kerb) of cement concrete Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with as per specification and direction of engineer-in- Charge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compacted and curing the mortar joints for atleast 3 days including cost and carriage of all materials complete etc. |
| 14 | (B) Cost of Road Safety & Road Furniture Work : |
| 15 | Finishing walls with smooth acrylic paint with silicone additive with required shade new work ( Two or more coats applied @ 1.43 lit / 10 sq.m. over and including priming coat of exterior primer applied @ 0.90 lit. / 10 sq. m. |
| 16 | Painting with best quality synthetic enamel paint of approved make and brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with a ordinary pain of approved make and brand. |
| 17 | Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) |
| 18 | Supplying, providing and fixing of self sticking Vinyl stickering with customized designing. The manufacturing to be done as per the design provided and approved by Engineer in charge including all lead , lifts , labours, scaffolding as necessary all complete. |
| 19 | Supplying & fixing of Hazard Markers of size : 30cm X 90 cm as per IRC :79-1981 ( The above is inclusive of vertical post) |
| 20 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender