Tender For Repair/ Maintenance Of Plinths (Pqc) At Silver Arrow Complex At Stn Sirsa Under Ge (Af) Sirsa
Tender Value
20 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
6 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirsa → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Plinths (Pqc) At Silver Arrow Complex At Stn Sirsa Under Ge (Af) Sirsa
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of lime Concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge. |
| 2 | Material and labour for Reinforced Cement concrete(nominal mix) B0 1:2:4 12.5mm graded aggregate as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engr-in-charge. |
| 3 | Material and labour for Pavement quality concrete(PQC) of minimum 28 days field Flexural strength of 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15 2017, coarse aggregate of clean, hard strong, dense non-porous and durable pieces of crushed stone or gravel, fine aggregates of clean natural sand or crushed stone sand or combination of both using minimum 360 kg/cum of cement with non-circular virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240°C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip-form paver of minimum 7.50 m width, including curing and tining by Texturing cum Curing Machine required surface texturing to be done as specified in clause 10.1.14 and table of IRC 15-2017 complete all as specified and directed by Engr-in-Charge. |
| 4 | Material and labour for Forming 25 mm width expansion joint in concrete slab for full depth of PQC. Early entry saw and subsequent cutting by using diamond bit cutter of appropriate size. straight and smooth edges. Join cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris. The join then filled with pre-molded 25 mm thick compressible polyethylene closed cell type filler board as specified thereafter application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the backup rod and pouring the sealant Placing of closed cell medium density, crossed linked polyethylene foam backup rod of 30 mm dia, over filler board and filled with polyurethane based sealant complying with BS5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) of+/- 30% having minimum 10 year performance guarantee applying masked tape on the edges of joints and removing the masking tape after filling of sealant as per the method specified by the manufacture complete as specified and directed by Engr-in-Charge. Note: The rate quoted by bidder is deemed to be inclusive of sealant, filler board etc any other material required for the item. |
| 5 | Material and labour for TMT Bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed by Engr-in-charge. |
| 6 | Material and labour for Formwork to fair finished surfases soffits of suspended slabs such as roof slabs, floor slabs, landings and sismilar work complete all as specified and as directed by Engr-in-charge. |
| 7 | Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed by Engr-in-charge. |
| 8 | Material and labour for Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed by Engr-in-charge. |
| 9 | Material and labour for Rendering (External) 15mm thick in CM 1:4 on Brick Walls or on Concrete Surfaces, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Fair and Even, complete all as specified and as directed by Engr-in-charge.Note:- WPC will be measured and paid under appropriate item. |
| 10 | Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified and as directed by Engr-in-charge. |
| 11 | Demolition of cement Concrete(unreinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge. |
| 12 | Material and labour for Providing precast cement concrete set in cement mortar 1:4 Type B1 1:2:4(20mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faceswindow or door cills, lintels,bressumers, steps,quoin blocks (for use with masonry), string courses, copings.kneelers, apex stones, pier caps,columns, posts,boundary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin) corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers,weatherings,throat- ing etc. and setting in mortar complete with joints to match complete all as specified and as directed by Engr-in-charge. |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender