Tender For Special Repair Of Toilets In Building Number Sl-12, Toilet Near Bldg No 105 B (Bn Mag) Toilet And Urinal Point Near Pt Ground For Jcos/Ors And Repair/Replacement Of Street Light, Distribution Lines At Military Station Mount Abu
Tender Value
7.58 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
14 days left
EMD
15164
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirohi → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Toilets In Building Number Sl-12, Toilet Near Bldg No 105 B (Bn Mag) Toilet And Urinal Point Near Pt Ground For Jcos/Ors And Repair/Replacement Of Street Light, Distribution Lines At Military Station Mount Abu
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed. |
| 2 | Material & Labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and inted in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7/ 300x600mmx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete. |
| 4 | Taking down cement plaster of any description and material and labour for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, finished even and smooth without using extra cement. |
| 5 | Material and labour for preparation of newly plastered surface of ceiling and applying three coat of white wash complete all as specified and directed. |
| 6 | Taking down cement mortar plaster/terrazo plaster of any description on wall including raking out joints, hacking for key, scrubbing down with water etc. complete all as directed. |
| 7 | Material and labour for 15 mm thick rendering in cement mortar 1:4 using water proofing compound @ 2% by weight of cement in finish coat on other than fair faces of brick wall surfaces, finished even and smooth without using extra cement complete. |
| 8 | Material and labour for preparation of newly plastered surface of walls and applying two coats of cement based paint over a coat of 1 mm thick Birla white wall care putty etc all as specified and directed. |
| 9 | Material and labour for completely removal of existing treatment on surface of walls and applying of two coats of cement base paint over a coat of 1 mm thick Birla white care putty etc. all as specified and directed. |
| 10 | Material and labour for preparation of old surface of ceiling and applying two coats of white wash. |
| 11 | Taking down shutter (window/venti) from the frame, any description n-exceeding 1.00 sqm each including removing from site. |
| 12 | Taking down wooden frame with shutter without taking off shutter from the frame exceeding 1.5 sqm each but n-exceeding 4 sqm each including removing from site. |
| 13 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing. |
| 14 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 15 | S & F Aluminium anodised or powder coated door, window, ventilator ,cabin partiton frame with one or more rebates and shutter sliding or casement windows as reqd . including jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc. complete all as specified and directed by Engr-in-charge. |
| 16 | Supply and fixing of MS butt hinges, medium weight, cold rolled of size 100 mm. |
| 17 | S & F aluminium alloy, anodised, sliding door bolt of length 250 mm with hasp and staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 18 | S & F aluminium anodised barrel tower bolt of extruded section 200 mm long. |
| 19 | S & F 150 mm size aluminium handles, cast type anodised. |
| 20 | S & F in repair vitreous china wash hand basin, white flat back of size 550 x 400 mm including bracket. |
| 21 | Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) white colour including PVC cover. |
| 22 | Supply and fixing in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including trap, and connection to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor fixed complete all as specified and directed. |
| 23 | S & F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and all fittings and connections all as specified and directed. |
| 24 | S & F in repairs Jet spray, chromium plated, for EWC including hinges fixed complete all as specified and directed. |
| 25 | S & F in repairs CP Health faucet with flexible pipe with fixing holders fixed complete all as specified and directed |
| 26 | S & F in repairs two way angle cock chromium plated, fancy type of size 15 mm bore screwed down, high pressure, with or without lettered \\"Hot\\" or \\"Cold\\" with long screwed shanks and flynut, screwed for 15 mm iron pipe and fixed. |
| 27 | Supply and fixing in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) fixed complete all as specified and directed. |
| 28 | S & F in repairs toilet paper holder, chromium plated fixed complete all as specified and directed. |
| 29 | Supply and fixing in repair, brass chromium plated tubular towel rail, 20 mm dia, 'D' type, 60 cm long between flange fixed complete all as directed. |
| 30 | Supply and fixing in repair pillar taps cast copper alloy with capstanb heads, chromium plated, fancy type of size 15 mm bore screwed down, high pressure, with or without lettered \\"Hot\\" or \\"Cold\\" with long screwed shanks and flynut, screwed for 15 mm iron pipe and fixed. |
| 31 | Taking down GI water tubing with fittings including cleaning for re-fixing or removing from site of size 15 mm bore. |
| 32 | S & F of GI water tubing, medium grade with fittings, fixed to wall and ceiling or laid in floor of size 15 mm bore. |
| 33 | Cutting chases in brick wall, girth not exceeding 10 cm for concealing water tubing and making good in cement mortar 1:3. |
| 34 | Supply and fixing in repair stop valve cast copper alloy, chromium plated, fancy type with long shank and cup concealed type of size 15 mm complete all as specified and directed. |
| 35 | Supply and fixing in repair, angle cock cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed, concealed of size 15 mm bore. |
| 36 | Supply and fixing in repair, bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly hande screwed down, screwed for iron pipe or for brass ferrule and fixed, concealed of size 15 mm bore complete all as specified and directed. |
| 37 | S & F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 38 | S & F 75mm PVC (SWR) bends any radius complete all as specified and directed. |
| 39 | S & F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 40 | S & F 110mm PVC (SWR) bends any radius complete all as specified and directed. |
| 41 | Demolition of AC/CI pipe of 100 mm dia, set in cement mortar, fixed in any position. |
| 42 | Demolition of AC/CI pipe of 75 mm dia, set in cement mortar, fixed in any position complete all as specified and directed. |
| 43 | Supply and fixing SGSW gully trap 150 x 100 mm size square or round mouthed type 'P'. |
| 44 | Supply and fixing of 75 mm CI Nahani trap with PTMT gratings (minimum weight 250 gm) including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 all as specified and directed. |
| 45 | S & F in repairs 32 mm PVC waste pipe for wash basin, 600 mm long |
| 46 | S & F in repair PVC connections 45 cm long including 15 mm bore PTMT nuts on both ends complete all as specified and directed. |
| 47 | S & F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cupwashers fixed complete all as specified and directed. |
| 48 | S & F in repair Tubular towel rail, 20mm dia, brass chromium plated, D type, 60cm long between flanges fixed complete all as specified and directed. |
| 49 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed complete all as specified and directed. |
| 50 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness complete all as specified and directed |
| 51 | S&F Chequered cement concrete tiles 30cm X 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments including 15mm thick screed in CM 1:4 complete all as specified and as directed. |
| 52 | M & L for 75 mm thick cement concrete type B-2, 1:2:4 (using 40 mm graded stone aggregate) as in path, floor etc, finished even and smooth without using extra cement, all as specified and directed. |
| 53 | Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. all as directed by Engr-in-charge. |
| 54 | M&L for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed on stone/brick masonry wall surface with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified for One light point / Fan/ bell point controlled by one switch. |
| 55 | (a) One light point controlled by one switch with cables 1.5 sqmm size. |
| 56 | (b) One fan/exhaust fan point controlled by one switch with cables 1.5 sqmm size. |
| 57 | M&L switch piano flush type single pole one way 5/6 Amps. |
| 58 | M&L lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including dismantling old one. |
| 59 | M&L Ceiling rose, 3 phase/PVC/polycarbonate, isolated body including dismantling old one. |
| 60 | S&F LED integrated batten tube light fittings 20W 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed. |
| 61 | M&L MCB SPN DB comprising of sheet metal enclosure single door suitable for mounting MCB 240 Volts 2 way including dismantling old one. |
| 62 | Supply, laying, hanging form overhead electric pole and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 4 sq mm 2 core. |
| 63 | Taking down old unsv exhaust fan, and S&F exhaust fans AC single phase PVC body 240 Volts of size 200mm sweep with louver and complete accessories including making hole with suitable size for Exhaust fan, after completer of work, finishing with cement and plastering and repainting with existing color all as specified and directed by Engr-in-Charge. |
| 64 | Supply, replace, testing and commisioning of LED street lights including providing of two core cable from poles to street lights of length as required on the same pole with fittings having ststem of 90 watt all as directed by Engr-in-Charge. |
| 65 | S&F inreplacement of GI tubing 40mm dia light grade 1.2 mtr long pipe bent to shape 120 degree for mounting of security light and fixed to wall/pole, with suitable MS clamps 4 Nos (minimum width of 50mm and thic-5mm) with nut and bolt and washers including connecting of existing street light with two core copper cable of suitable length complete all as directed. |
| 66 | Material and labour for zebra painting with two coats of IST quality synthetic enamel paint on HT/LT concrete poles up to 1.5 metre height from pedestal in 30 cm height in black & white paints including two coat of cement base paint on pedestal of pole and painting the cross arms with one coat of synthetic/aluminium enamel paint including preparation of steel surfaces and including writing the pole Nos of 100mm height letters / figures with acrylic PVC strip \\"MES/HT or LT ___\\" (pole number) all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender