Tender For Repair To Fencing, Area Drainage, Reinforced Cement Concrete Cover, Hardstanding And Repair Of Sand Butt With Misc Works Of Fire Range As Well As Various Location Under Age B/R-Ii At Afs Chakeri Kanpur
Tender Value
49 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
10 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Fencing, Area Drainage, Reinforced Cement Concrete Cover, Hardstanding And Repair Of Sand Butt With Misc Works Of Fire Range As Well As Various Location Under Age B/R-Ii At Afs Chakeri Kanpur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts(wood, steel or R.C.C.) any section, including taking out embedded in concrete or brick portion and making good disturbed. |
| 2 | Dismantling wire mesh/chain link fencing any type complete all as specified and directed. |
| 3 | Dismantling of Barbed wire fencing / concertina coil fencing any type complete all as specified and directed. |
| 4 | Excavating in post holes (or similar holes) in soft / loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm. |
| 5 | M&L for PCC 1:3:6 Type C2 using (40mm graded aggregate) as in foundation/post holes Complete all as specified and directed. |
| 6 | S&F Mild steel angle iron for posts and struts as in fencing post including cutting tops to shape as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc.) including all necessary drillings, bolting or riveting, etc. and similar confirming to Fe 290 Gde E-165complete all as specified and directed. |
| 7 | S&F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured separtely). |
| 8 | S&F for 1.00m dia concertina coil hot dipped prime galvanized punched tape string core (2.8mm thick wire of ring tensile strength of 165Kg/50mm tape (0.52mm thick) and having 0.915m dia (appx) after stretching, stretched length of 9.00m (maximum) including GI-U clips for laying over boundary wall with angle iron complete all as specified and directed. |
| 9 | M & L for restraining re-scuring including making good staples etc galvanised. 2 strand, steel barbed wire of any description and restraining and refixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed. |
| 10 | Supply only chain link fencing M S galvanised (4 mm thick) fencing of square shape mash of size 50 mmx 50mm complete all as specified and directed. |
| 11 | Fixing only chain link fencing or welded wire mesh of any description complete all as specified and as directed. |
| 12 | M&L for mild steel plain straining bars 10 mm dia cut to length bent to shape required including making hooks at end woven in chain link and fixed with nut and bolts Fe 410 (W)Gde Fe 410-W(Gde E-250) quality -A or Fe-290 (Gde E-165) complete all as specified and directed. |
| 13 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 14 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitings and hanging also fastening and fixing complete all as specified and as directed. (Fe-290 Gde E-165). |
| 15 | S&F 1.25 mm thick Mild steel, plain, blacksheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bendingor turning up, mitred angles, etc. as required and directed. |
| 16 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 17 | M&L Brick work old size sub class ' B' bricks straight or curved in plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 18 | M&L Brick work (except bricks) old size sub class ' B' brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 19 | Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 20 | M&L for 15mm thick rendering on fair faces of brick wall in CM (1:4) finished even & smooth, complete as specified and directed.Note : The rate is inclusive of required scaffolding to execute the work upto the height of 12m and cleaning of the site after completion. |
| 21 | Providing and fixing precast cement concrete Type B0 (1:2:4) using 12.5mm aggregates louvres and jallies, 50 mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed. |
| 22 | M & L for preparing new plastered surface and applying two coats of cement base paint complete all as specified and as directed. |
| 23 | Complete removal of existing treatment i.e. white wash ,colour wash etc. applying Two coats of cement base paint (approved colour) complete all as specified and directed. |
| 24 | M&L cement concrete Type C-2 (1:3:6) as in surface channel and drain, complete all as specified. |
| 25 | M & L for cement concrete Type B1 (1:2:4) using 20mm graded aggregates in lintets, parapets and copings, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete as specified and directed. |
| 26 | Demolition of cement concrete (unreinforced) including top finish tile,paver block etc in ground floors including top finish and pavings n exc 15 cm thickness (below or above ground level incl tiles/stones if any. |
| 27 | M & L for cement concrete Type D2 (1:4:8) 40mm graded aggregate as in foundations,filling and mass concrete complete all as specified and directed. |
| 28 | M&L for sand filling /sand cushioning for bed of interlocking tiles complete all as specified and as directed. |
| 29 | M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thick, M-40 grade with grey cement all as specified and directed by Engr-in-Charge. |
| 30 | M&L for PCC 1:3:6 type C-1 (20 mm graded aggregate ) in copings, kneelers, apex stones, bed plates, kerbs stones, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as specified and directed. |
| 31 | M & L for preparation of old painted surfaces of cement concrete pathways / chequered tile paths / interlocking paver blocks and applying two coat of high-performance acrylic floor coat emulsion on prepared cement concrete or paver block surfaces. The surface shall be thoroughly cleaned of dust, grease, vegetation and fungal growth complete in all respects as per manufacturer specifications and instructions. |
| 32 | M & L for cement concrete 100 mm thick Type B2 (1:2:4) using 40mm graded aggregate as harstanding, floors and pavings, finished even and smooth without using extra cement etc. complete as specified and directed. |
| 33 | M & L for glass dividing stripes 3mm thick 38mm width inserted in position and conform to design, complete as specified and directed. |
| 34 | M&L 75 mm thick cement concrete type C-1 1:3:6 mix (20mm graded agg) as in flooring /paving/plinth protection including finishing even & smooth w/o using extra cement complete all as specified and directed. |
| 35 | M&L for preparation of new or previously untreated surfaces and applying two coats of synthetic enamel paint over a coat of redoxide, zinc chrome primer of same make complete all as specified and as directed |
| 36 | M&L for preparation of old painted steel surface and applying one coats of synthetic enamel paint complete all as specified and as directed |
| 37 | Removing / Taking out of sand (fine aggregate) and saw dust from small arms range/firing butt. The serviceable materials of sand and raw dust are segregated by sieving and stacking a side for re-use complete all as specifed and as directed. |
| 38 | M&L for fine aggregate (approved sand) and saw dust mixed at (1:1) ratio (one part of sand and one part of saw dust) and spread, levelled, compacted to a true and inclined finished surface, complete all as directed by Engineer-in-Charge. |
| 39 | Description all as per Ser Item No. 38 above but except sand and saw dust complete all as directed by Engineer-in-Charge.Note- (i) Sand and Saw dust are obtained from Sl item No.37 (ii) Mixing ratio shall be 1:1 (one part of sand and one part of saw dust). |
| 40 | Removal of sand and saw dust obtained from ser item No.37 above to a distance n.exc 50m and depositing where directed of a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 41 | Demolition of reinforced cement concrete of any description all as directed by Engineer-in-Charge |
| 42 | M & L for pre-cast RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in manhole cover / drain covers /beams set in CM 1:6 also placing & properly fixing the covers at specified location using Mechanical means / manually complete all as specified.Note : Contractor should make his own arrangement for removing old unserviceable drain covers using Hydraulic Crane or any other mechanical means necessary. No Extra payment shall be admissible for the same. |
| 43 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and directed. |
| 44 | Removing of demolished meterial to a distance of 500m or under, beyond the lead included in the rates, including loading, unloading complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender