Tender For Replacement Of Solar Modules, Solar Water Heater And Electrical Panels, Connected Accessories Dameged/Defected During Cyclon Asna At Icgs Jakhau And Cgra Naliya Under Ge (I) (Cg) Gandhinagar
Tender Value
32.71 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
22 days left
EMD
65500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Solar Modules, Solar Water Heater And Electrical Panels, Connected Accessories Dameged/Defected During Cyclon Asna At Icgs Jakhau And Cgra Naliya Under Ge (I) (Cg) Gandhinagar
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' |
| 2 | Design, supply, erecting, installing, testing and commissioning Solar PV module of 10800 Wp capacity at roof top at CGRA Naliya/ICGS Jakhau with Suitable Nos of Solar Photovoltaic module of Topcon Bi-facial half cut PV cells having Suitable power rating not less than 500Wp with Min Efficiancy = 21 %. Make : MNRE/GOI approved ALMM , BIS 5 Star rated , SPV Modules shall be essentially indigeneously manufactured (Made in India) only. including MMS Structure made of Hot dipped galvnized iron comprising of sub components/sub systems including DC & AC Cable compatible to the existing plant and meeting the specifications as given subsequently complete all as per specification and directed.Make of SPV module: Havells/ Adani/ Waaree/ Vikram Solar/ Luminous. |
| 3 | Design, supply, erecting, installing, testing and commissioning Solar PV module of 15750 Wp capacity at roof top at ICGS Jakhau / Naliya (where suitable) with Suitable Nos of Solar Photovoltaic module of Topcon Bi-facial half cut PV cells having Suitable power rating not less than 500Wp with Min Efficiancy = 21 %. Make : MNRE/GOI approved ALMM , BIS 5 Star rated ,SPV Modules shall be essentially indigeneously manufactured (Made in India) only. including MMS Structure made of Hot dipped galvnized iron comprising of sub components/sub systems including DC & AC Cable compatible to the existing plant and meeting the specifications as given subsequently complete all as per specification and directed.Make of SPV module: Havells/ Adani/ Waaree/ Vikram Solar/ Luminous. |
| 4 | Design, supply, erecting, installing, testing and commissioning Solar PV module of 9900 Wp capacity at roof top at 10 Acr/1 Acr (where suitable) Jhakau with Suitable Nos of Solar Photovoltaic module of Topcon Bi-facial half cut PV cells having Suitable power rating not less than 500Wp with Min Efficiancy = 21 %. Make : MNRE/GOI approved ALMM , BIS 5 Star rated , SPV Modules shall be essentially indigeneously manufactured (Made in India) only. Including MMS Structure made of Hot dipped galvnized iron comprising of sub components/sub systems including DC & AC Cable compatible to the existing plant and meeting the specifications as given subsequently complete all as per specification and directed.Make of SPV module: Havells/ Adani/ Waaree/ Vikram Solar/ Luminous. |
| 5 | NOTE FOR BOQ ITEM NO 1.00 TO 3.00:-(i) Engineer in charge ensure that the solar PV module including all sub component and system of suitale rating not less then 600 wp submitted by the contractor shall be of appropriate size and shape to match/ Compatable with the existing servicieable panel being a replacement to the existing damage panels. (ii) Extra DC Cable will be paid only where Cable faulty, Panel/ Structure operational.(iii) Contractor has to make whole plant operational at the Location mentioned Above. (iv) Contractor has to make its Own arrangemnets for accesesbility of Roof. |
| 6 | (v) Minimum required Numbers of PV modules of not less than 600 Wp each having efficiency not less than 21% at standard test condition, fill factor more than 0.75, plant performance ratio more than or equivalent to 75% in accordance with IEC:61724 & made of high transmittivity glass and glass front surface shall give high encapsulation gain. (transmittance above 90% and bending less than 0.3%) Electrical parameters of solar PV module under STC of irradiance not less than 1000 W/m2 , Air Mass 1.5 and 25°C cell temperature will be as under- Max Peak power Pmax STC : not less than 600 WpCurrent at Pmax Imp (A) STC : not less than 14.80 AVoltage at Pmax Vmp (V) STC : not less than 40.54 VoltShort circuit current Isc STC : not less than 15.82 AOpen circuit voltage Voc STC : not less than 48.30.00 Volts (vi) Rated output of modules shall have positive tolerance of 3-5% & no negative tolerance is allowed. (vii) It shall perform satisfactorily in relative humidity 85 ± 5% with temperature -10 °C to +85°C (Cell) and should withstand wind 200 Km/Hr on the surface of the panel. (viii) PV modules must be warranted for their output peak watt capacity, which shall not be less than 90% of the initial value at the end of 10 years and 80% of the initial value at the end of 25 years.(ix) Each module shall have RFID tag encapsulated with Solar Cells bearing the following details. |
| 7 | ●Name of manufacturer of PV module●Name of manufacturer of solar Cell●Month and year of manufacture (Separated for cell & module)●Made in india only (separately for solar cell & module)●Peak wattage, Im, Vm and fill factor of the module.●Date of year of obtaining IEC PV module qualification certificate including the test lab issuing IEC certificate.●Unique Serial No and model No of Module. ●I-V curve of Module●The mechanical structures, electrical works and overall workmanship of the grid solar power plant must be warranted for a minimum of 5 Years.●Name of the test lab issuing IEC certificate.●Other relevent information on traceability of solar cells and modules. Please Enable Macros to View BoQ information |
| 8 | ●Name of manufacturer of PV module●Name of manufacturer of solar Cell●Month and year of manufacture (Separated for cell & module)●Made in india only (separately for solar cell & module)●Peak wattage, Im, Vm and fill factor of the module.●Date of year of obtaining IEC PV module qualification certificate including the test lab issuing IEC certificate.●Unique Serial No and model No of Module. ●I-V curve of Module●The mechanical structures, electrical works and overall workmanship of the grid solar power plant must be warranted for a minimum of 5 Years.●Name of the test lab issuing IEC certificate.●Other relevent information on traceability of solar cells and modules. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender