Tender For Repair & Maintenance Of Elect Supply Distribution System Dg Set Alongwith Connected Items At Ferozepur Under Ge (Af) Bhisiana
Tender Value
8 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
18 days left
EMD
16000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of Elect Supply Distribution System Dg Set Alongwith Connected Items At Ferozepur Under Ge (Af) Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Filling in replacement of transformer oil up to minimum level, break down value of transformer oil should not be less than 50 KV, complete all as specified and as directed by Eng -in - Charge. |
| 2 | Material & Labour for filtration/dehydration of transformer oil up to break down valve reaching upto 50 KV dilectric strength, complete all as specified and as directed by Eng -in - Charge.NOTE : Contractor will arrange filtration plant machine at site of transformer. Dehydration work will be carried out in working condition and electric supply will be taken from same transformer. |
| 3 | Supply and fixing in replecement MCCB 400 Amp 4 Pole of rupturing capacity 36 KA, complete all as specified and directed by Engr-in-Charge. |
| 4 | Supply and fixing in replecement MCCB 250 Amp 4 Pole of rupturing capacity 36 KA, complete all as specified and directed by Engr-in-Charge. |
| 5 | Supply and fixing in replecement MCCB 200 Amp 4 Pole of rupturing capacity 36 KA, complete all as specified and directed by Engr-in-Charge. |
| 6 | Supply and fixing in replecement MCCB 160 Amp 4 Pole of rupturing capacity 25 KA, complete all as specified and directed by Engr-in-Charge. |
| 7 | Supply and fixing in replecement MCCB 125 Amp 4 Pole of rupturing capacity 16 KA, complete all as specified and directed by Engr-in-Charge. |
| 8 | Supply and fixing in replecement MCCB 100 Amp 4 Pole of rupturing capacity 16 KA, complete all as specified and directed by Engr-in-Charge. |
| 9 | Supply and fixing in replecement MCCB 63 Amp 4 Pole of rupturing capacity 16 KA, complete all as specified and directed by Engr-in-Charge. |
| 10 | Supply and fixing in replacement of 120 LM/watts, IK-08, 120watt LED Flood light for highly efficient LED Flood light with lens made of pressure die cast aluminium housing, extruded aluminium heat sinks & enclosed with toughened glass IP-66 fitted on the wall/ roof top/ pole/ High Mast tower etc. with the help of nuts, bolts, clamps PCC work including connection with 2.5 Sqmm 3 core copper wire from MCB to light fitting with and including PVC pipe and , complete all as specified and as directed by Eng -in - Charge. Note :- All T&P i.e ladder, tools, safety gloves etc will be provided by the contractor without any extra cost. |
| 11 | Supply and fixing in replacement of 60 watt LED street light fitting 120 LM/watts, IK-08, Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics including connection with 2.5 Sqmm 3 core copper wire from MCB to light fitting with and including PVC pipe complete with IP 65/ 66 protection complete all as specified and as directed by Eng -in - Charge. Note :- All T&P i.e ladder, tools, safety gloves etc will be provided by the contractor without any extra cost. |
| 12 | Supply and fixing in replacement of LT cable XLPE insulated, armoured and PVC bedded 1100 volts grade, heavy duty with aluminium conductor 240 Sqmm 3.5 core laid in ducts/ through pipes, in floor, on poles, in trenches, complete all as specified and as directed by Eng -in - Charge. |
| 13 | Supply and fixing in replacement of LT cable XLPE insulated, armoured and PVC bedded 1100 volts grade, heavy duty with aluminium conductor 95 Sqmm 3.5 core laid in ducts/ through pipes, in floor, on poles, in trenches, complete all as specified and as directed by Eng -in - Charge. |
| 14 | Supply and fixing in replacement of LT cable XLPE insulated, armoured and PVC bedded 1100 volts grade, heavy duty with aluminium conductor 70 Sqmm 3.5 core laid in ducts/ through pipes, in floor, on poles, in trenches, complete all as specified and as directed by Eng -in - Charge. |
| 15 | Supply and fixing in replacement of LT cable XLPE insulated, armoured and PVC bedded 1100 volts grade, heavy duty with aluminium conductor 25 Sqmm 4 core laid in ducts/ through pipes, in floor, on poles, in trenches, complete all as specified and as directed by Eng -in - Charge. |
| 16 | Supply and fixing in replacement of LT cable XLPE insulated, armoured and PVC bedded 1100 volts grade, heavy duty with aluminium conductor 16 Sqmm 4 core laid in ducts/ through pipes, in floor, on poles, in trenches, complete all as specified and as directed by Eng -in - Charge. |
| 17 | Supply and fixing in replacement of LT cable XLPE insulated, armoured and PVC bedded 1100 volts grade, heavy duty with aluminium conductor 10 Sqmm 4 core laid in ducts/ through pipes, in floor, on poles, in trenches, complete all as specified and as directed by Eng -in - Charge. |
| 18 | Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep for foundation of poles/ stays/ cables/ Pipe lines etc and getting out in soft/ loose soil, complete all as specified and as directed by Engr-in-Charge. |
| 19 | Returning, filling in including spreading, leveling, watering and well ramming in layers each not exceeding 25 cm thickness. complete all as specified and as directed by Engr -in - Charge. |
| 20 | Removing surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point. Complete all as specified and as directed by Engr -in - Charge. |
| 21 | Material and labour for sand cushioning with a layer of sand 8 cm thick before laying of cables and 15 cm thick after laying of cable in trenches complete all as specified and as directed by Eng -in - Charge. |
| 22 | Suppling & laying old size sub class 'B’ bricks laid flat in trenches over the cable with length of bricks perpendicular to the direction of cable, adjacent/ abutting each other, complete all as specified and as directed by Eng -in - Charge. |
| 23 | Material and labour for Preparation of old Steel Surfaces and applying two coat of synthetic enamel of silver paint to Steel tubular Pole height of pole 9/11 mtr from ground level, and painting in Yellow and black strips of 30 CM height each including numbering of Pole No with black paint, and painting of coping complete all as specified and as directed by Engr-in-Charge.Note: Each pole shall be painted in Black & Yellow upto 1 metre from ground and above that pole shall be painted in White & Silver paint above 1 metre. |
| 24 | Supply and fixing in replacement of LT cable straight through Jointing kit size 6 sqmm to 35 Sqmm, complete all as specified and as directed by Eng -in - Charge. |
| 25 | Supply and fixing in replacement of LT cable straight through Jointing kit size 50 sqmm to 120 Sqmm, complete all as specified and as directed by Eng -in - Charge. |
| 26 | Supply and fixing in replacement of LT cable straight through Jointing kit size 150 sqmm to 300 Sqmm, complete all as specified and as directed by Eng -in - Charge. |
| 27 | Supply and fixing in replacement of Cable end jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of 50 sqmm to 95 sqmm complete all as specified and as directed by Eng -in - Charge. |
| 28 | Supply and fixing in replacement of Cable end jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm.complete all as specified and as directed by Eng -in - Charge. |
| 29 | Material and labour for Taking down unserviceable LT UG cable any type from trenches and removing the fault and relaying of LT UG cable after rectifying the fault and making cable in serviceable condition of 1100 V grade UG cable cf size from 95 to 240 sqmm, 3.5 core including relaying of bricks, sand and refixing as existing complete all as specified all as directed by Engr-in-Charge.Note : (i) Straight through joints shall be measured and paid seaprately under respective item of BOQ. (ii) Excavation, Returning, filling, removal will be measured and paid separately. |
| 30 | Material and labour for Taking down unserviceable LT UG cable any type from trenches and removing the fault and relaying of LT UG cable after rectifying the fault and making cable in serviceable condition of 1100 V grade UG cable of size from 10 to 70 Sqmm 2 to 4 core including relaying of bricks, sand and refixing as existing complete all as specified all as directed by Engr-in-Charge.Note: (i) Straight through joints shall be measured and paid seaprately under respective item of BOQ. (ii) Excavation, Returning, filling, removal will be measured and paid separately. |
| 31 | Material and labour for Relaying/ Rerouting including taking down unservicable HT XLPE cable from trench of any size and any type after fault detection and rectification including neccessary connections complete all as specified and directed by Engr-in-charge.Note :- Earth work measured and paid seperately. Please Enable Macros to View BoQ information |
| 32 | Material and labour for Relaying/ Rerouting including taking down unservicable HT XLPE cable from trench of any size and any type after fault detection and rectification including neccessary connections complete all as specified and directed by Engr-in-charge.Note :- Earth work measured and paid seperately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender