Tender For Provision Of Laundromat In Otm, At Cdm Under Ge (North) Secunderabad
Tender Value
27.16 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
20 days left
EMD
54500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Laundromat In Otm, At Cdm Under Ge (North) Secunderabad
BOQ
| Sl. No. | Item Description |
| 1 | This Schedule (contains under mentioned Sl. item No. 1.01 to1.03) is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6. |
| 2 | Schedule 'A' Part - I (Building and Structures) Lumpsum price worked out by the contractor for construction of \\"Provision of Mechanical laundry/drying and ironing room with RCC framed structure,ATT, WPT with APP etc complete all as shown on drawing and as per specifications\\" as listed in sch 'A' part-I |
| 3 | Lumpsum price worked out by the contractor for construction of \\"Provn of CGI Sheet Covered shed with all fittings complete all as shown on drawing and as per specification.\\" as listed in Schedule 'A' part-I |
| 4 | Lumpsum price worked out by the contractor for construction of \\"Provision of Dhobi Ghat (03 Stones) complete all as shown on drawing and as per specification.\\"as listed in Schedule 'A' part-I |
| 5 | Lump sum price worked out by the Contractor for “EXCAVATION, EARTH WORK AND SITE CLEARANCE” as listed in Schedule ‘A’ Part - II representing _______ % ______________ percent Above / Below the lump sum price of ₹ 43307.86 inserted by the MES in Schedule ‘A’ Part - II |
| 6 | Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - III representing __________ % ____________ percent Above / Below the lump sum price of ₹ 91048.78 inserted by the MES in Schedule ‘A’ Part - III |
| 7 | Lump sum price worked out by the Contractor for “ INTERNAL WATER SUPPLY ” as listed in Schedule ‘A’ Part - IV representing __________ % __________ percent Above / Below the lump sum price of ₹ 18797.76 inserted by the MES in Schedule ‘A’ Part - IV |
| 8 | Lump sum price worked out by the Contractor for “ (Road/Pavement/Hard standing) ” as listed in Schedule ‘A’ Part - V representing __________ % ___________ percent Above / Below the lump sum price of ₹ 257043.00 inserted by the MES in Schedule ‘A’ Part - V |
| 9 | Lump sum price worked out by the Contractor for “ (Sewage Disposal) ” as listed in Schedule ‘A’ Part - VI representing ___________ % _________________ percent Above / Below the lump sum price of ₹ 15121.66 inserted by the MES in Schedule ‘A’ Part - VI |
| 10 | Lump sum price worked out by the Contractor for “ EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - VII representing ______ % _________________ percent Above / Below the lump sum price of ₹ 119511.16 inserted by the MES in Schedule ‘A’ Part - VII |
| 11 | Lump sum price worked out by the Contractor for \\" EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - VIII representing _______ % __________________ percent Above / Below the lump sum price of ₹ 24870.22 inserted by the MES in Schedule ‘A’ Part - VIII |
| 12 | Schedule 'A' Part - IXThis Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item No. 9.00 to 16.00 |
| 13 | Mechanical Laundry Supply & fix Loundramat Hardmount Washer- Extractor with following specification control Option Quantum Capacity- lb(kg) - 60(27) Overall Width - inch (mm) - 34.1(866) \\"Overall Depth - inch (mm) - 44.7 (1135)Overall Height - inch (mm) - 49.9 (1267)Cylinder Diameter - inch (mm) -30 (762)Cylinder Depth - inch (mm) -22 (559)Cylinder Volume - cu. ft (liters) -9.0Door Opening Size - inch (mm) - 16.3(414)Door Bottom to Floor - inch (mm) -14.9(378)Water Inlet Connection - inch (mm) - 2 x 0.75 (19)Drain Diameter - inch (mm) -1 x 3 (76)Drain Height to Floor - inch (mm) -4.9 (124)Motor Power Consumption -HP (KW) 3 (2.2)Total # of Speeds -9Cylinder Speeds - RPM(G-Force)Gentle - 31 (0.4)Wash -43 (0.8)Distribution - 77 (2.5)Very Low - 252 (27)Low - 434 (80)Medium - 485 (100)High - 542 (125)Very High -594 (150)Ultra High -686 (200)Make -SPEED QUEEN, STEFAB, LG |
| 14 | S&F Washer Extractors, High Spin Soft Mount Stainless steel Cabinet computercontrolled of 30 KgCap of dry weight per charge -1:10 = 30 KgCylinder size/volume -318 LtrDrive Motor -3.75 KWCylinder speeds (wash) -40 to 50 RPMCylinder Speeds (Final extract/G Force - 780 to 840 RPM/305 to 354 GLoading Door opening -Ø500Water connection/Consumption -Ø25(1*BSP)/300 Ltrs/CycleDrain -Ø65Heating Steam Conn/Steam consumption -AXS 30 (Ø15 (0.5*BSP)/ 30Kg/HrElectric load -AXE 30/12-18 KWThermic flud connection/comsumption- AXT 30/ (Ø15 (0.5*BSP)/16000 Kcal/HrDimensions WxDxH - 1300 x 1400 x 1725Net weight /crated st/sze/WxDxH catered volume -1380 Kg/1500 Kg (1600 x 1700 x 2025) 5.5 M3Make - SPEED QUEEN, STEFAB,LG |
| 15 | INTERNAL WATER SUPPLY S & F bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed Make : Cat No. F2002153 of Cera or equivalent in Parryware/hindware as approved |
| 16 | INTERNAL ELECTRIFICATION S&F sheet metal enclosure vertical type MCCB DB TPN 4 way having degree of protection IP 43-IK 09 with metal double door 415 Volts, flush type made out of 1.2 mm CRCA sheet metal, duly powder coated confirming to IS 8623 with suitable rated bus bar and including 63 Amps MCCB with breaking capacity 16 KA as incomer alongwith provision for 12 Outgoing SP MCB's with magnetic locking system complete all as specified. Note: MCB SP Shall be measured and paid seperately Note Only MCB SPs shall be measured and paid seperately & MCCB 63 Amps 16 KA shall be inclusive of rate quoted by the contractor |
| 17 | S & F of Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution with suitable pipe bracket 32 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed by Engg-in-Charge. Make: Havells Model ENDURASUNDOWNSL25WLED765PASYBOPCIHD or Wipro/Philips. |
| 18 | S & F of wall mounted batten type LED light of 20/22 watts with aluminium extruded batten and system lumens of 2200 Im minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose all as directed by Engineer-in-charge. Make: Philips Model BN021C LED22S or Havells/Wipro/GE |
| 19 | SEWAGE DISPOSAL M & L for Double wall corrugated High-density polyethylene (SN 8) pipe of nominal size 200mm conforming to IS 16098-2013, laid in trenches/ floors over concrete bed complete all as specified and as directed. |
| 20 | S & F in repair for factory made 50 mm thick, 600mmX600mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement of MS TMT bars 8mm dia @ 100mm centre to centre both ways and set in CM 1:4 and handles of any description and in any position complete all as specified and as directed. |
| 21 | EXTERNAL ELECTRIFICATION M&L for cutting of existing bituminous/PCC road or flooring/plinth protection laying of Gl pipe in intersection for passing of LT XLPE cable including excavation in any type of soil returning filling in and making good top 30 cm of the trench by providing PCC 1:2:4 typ-e B1 using 20mm graded stone aggregate to flush with existing road surface complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender