Tender For Routine / Maintenance Of Lift Room And Shaft Including Water Proofing Of Lifts Pits Under Ge(West) Colaba, Mumbai.
Tender Value
9.99 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
20 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Routine / Maintenance Of Lift Room And Shaft Including Water Proofing Of Lifts Pits Under Ge(West) Colaba, Mumbai.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site all as specified and directed.Note : Up to fourth floor. |
| 2 | All as per item No. 1 but 5th to 8th floor ,complete all as specified and directed. |
| 3 | All as per item No. 1 but 9th to 12th floor ,complete all as specified and directed. |
| 4 | All as per item No. 1 but 13th to 16th floor ,complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick in CM (1:4) mixed with in liquid water proofing compound on fair faces of brick wall or concrete surfaces , finished even and fair complete all as speciifed.Note :- Upto fourth floor |
| 6 | All as per item No. 5 but 5th to 8th floor complete all as specified and directed. |
| 7 | All as per item No. 5 but 9th to 12th floor complete all as specified and directed. |
| 8 | All as per item No. 5 but 13th to 16th floor complete all as specified and directed. |
| 9 | Supply only liquid water proofing compound |
| 10 | M & L for preparing new surfaces of walls / ceilings by scrapping / rubbing and applying two coats of Elastomeric and resilient acrylic polymers and reinforcing synthetic fibers water proofing coating over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys bldgs complete all as specified and directed. Make: Asian Paints / Berger Paints / Dr fixit as approved by GE complete all as specified and directed. |
| 11 | All as per item No. 10 but 5th to 8th floor complete all as specified and directed. |
| 12 | All as per item No.10 but 9th to 12th floor complete all as specified and directed. |
| 13 | All as per item No. 10 but 13th to 16th floor complete all as specified and directed. |
| 14 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & directed. |
| 15 | Material and labour Granite (of any type and colur) 18 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in floors/Jambs/WHB conters and all other similar works in approved design over 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 16 | Demolition of concrete of any description and in any position not otherwise specifically provided and including removing debris out side MoD land complete all as specified and directed. |
| 17 | Material and labour for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete and sunken floor treatments complete all as specified and directed. |
| 18 | Demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided and including removing debris out side MoD land complete all as specified and directed. |
| 19 | M&L RCC M-30 ( 20 mm graded stone aggregates) as in foundations, Footings incl necessary formwork as required complete all as specified. |
| 20 | M & L for mild steel TMT bars 5 mm dia and over upto and including 10mm dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed |
| 21 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height. Complete all as specified and as directed. |
| 22 | Providing and placing in position micro-concrete, grade M30, which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section upto 100 mm complete including form works as required all as specified and as directed by the Engineer in charge (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) |
| 23 | Applying three coat URP waterproofing chemicals for water proofing coating mix URP- cement in the ratio 1:1.5 by volume on new plastered surface as per manufature instruction for sunken portion complete all as specified and directed.by Engr-in-Charge. Make : Dr Fixit -301 or equivalent of Asian paint / Fosroc/ sika |
| 24 | M&L for minor cleaning work, removal of existing roof treatment, loose concrete and filling cracks with polymer modified mortar using SmartCare RP or Epoxy Mortar and supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, SmartCare Ultron liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare Ultron or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications. Supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, SmartCare Ultron liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare Ultron or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications over and including padding of ready mixed micro cement concrete Type B1, 1:2:4 , 35 mm average thick concrete on RCC roof surfaces and all other similar works complete all as specified and directed Make:SmartCare Ultron Hybrid Polyurea/ Dr fixit flexi PU |
| 25 | M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 26 | M&L for priming concrete surfaces with approved bituminous primer and applying normal treatment using glass fibre base bitumen felt, Grade-II, laid with hot blown bitumen, including 100 mm side laps and 150 mm end laps, properly sealed, dressed into parapets, gutters, outlets, rainwater pipes and around all projections, complete all as specified and directed by Engineer-in-Charge. |
| 27 | Dismantling of floor hearth/wall tiles including cement mortar bedding (but not backing) and removing serviceable tiles. and removing debris out of MD land all as specified and directed. |
| 28 | Material and Labour for full Vitrified ultra polished tiles dark or light shade 600 x 1200 x 10-12 mm cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed. Make : Nitco / Kajaria / varmora, Sample as approved By GE. |
| 29 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MoD land complete all as specified and directed. |
| 30 | M&L Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 complete all as specified and directed. |
| 31 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified. |
| 32 | S&F powder coated aluminium frame of any colour (minimum thickness of powder coating 50 micron) for doors/windows/ ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 33 | M&L for 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side complete all as specified and directed. |
| 34 | Dismantling wrought iron or mild steel work of any description specifically provided for gates, staircase railings, framed truss etc complete all as specified and directed. |
| 35 | M&L for Preparation of new steel surfaces of any description over 10cm width or girth and application of two coats of synthetic enamel paint over one coat of red oxide primer etc,complete all as specified and directed. |
| 36 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender