Tender For Laying Of Di-K7 Distribution Pipeline To Newly Developed Area At Nuapada Nac
Tender Value
1.45 Crore
Estimated cost
Bid Submission
05 Oct 2026
13 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nuapada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Laying Of Di-K7 Distribution Pipeline To Newly Developed Area At Nuapada Nac
BOQ
| Sl. No. | Item Description |
| 1 | Supplying all materials , Labour Tools & plants for dismantling of Bituminous courses flexible pavemants and disposal od dismantled materials up to a lead of 1000 mtr ,stacking serviceable & unserviceable material separately all complete as per specification & the direction of engineer-in-charge. |
| 2 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately |
| 3 | Supplying all labour and T & P etc. and earthwork in excavation for foundation trenches in all kinds of soil within initial lead and lift including rough dressing and breaking clods to maximum 5 to 7 cm. in size etc. and laying in layers not exceeding 30 cm. in depth and as directed by the Engineer-in-charge all complete. |
| 4 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc. Also Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. |
| 5 | Supplying all materials, labour and T & P etc. and laying in trenches, centrifugally Ductile (spun) Iron pressure pipes conforming to I.S : 1536 of the following nominal diameter and Class as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. |
| 6 | 100mm dia D.I. Class-K-7 pipe |
| 7 | 150mm dia D.I. Class-K-7 pipe |
| 8 | Supplying all materials, labour and T & P etc. and making Tyton joint using rubber rings to spun iron Cast Iron pipes and fittings of the following nominal diameter including testing of the joints as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. (Including Tyton Ring). |
| 9 | 100mm dia. Rubber Tyton joint |
| 10 | 150mm dia. Rubber Tyton joint |
| 11 | Supplying all materials, labour and T & P etc. and laying in trenches double socket Cast Iron bends, fittings and specials conforming to I.S : 1538 of the following sizes as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. |
| 12 | 100 mm dia. D.I. K7 |
| 13 | 150 mm dia.(NH 353 & Biju Express Way) |
| 14 | Supplying all materials, labour and T&P etc. and filling in foundation and plinth with sand, well watered and rammed including transportation of all materials to site and as directed by the Engineer-in-charge, all complete. (Mending good damages of road). |
| 15 | Supplying all materials, labour and T & P etc. and providing cement concrete (1:3:6) using 40mm size hard granite metal, as per specification and direction of the EIC, including transportation of all materials to site, all complete. (Mending good damages of road). |
| 16 | Supplying all materials, labour and T&P etc. and providing M-15 Cement Concrete ( 1:2:4 ) including hoisting and laying using 12mm size hard granite crusher broken chips, including transportation of all materials to site and as directed by the Engineer-in-charge, all complete. (Mending good damages of road). |
| 17 | Supplying all labour and T&P etc. and filling in pipe line trenches with the excavated earth, well watered & rammed as per specification and as directed by the Engineer-in-charge, all complete. |
| 18 | Transportation by truck/Tractor up to 5 Km lead (DEBRIS & SURPLUS EARTH), including loading unloading and spreading etc. all complete. |
| 19 | Supply installation of globe valve OS & Y type rising spindle bolted bonnet with parabolic disc for manual flow control Moc - ASTM 216 Gr WCB SS410 disc nut stem and back sheet bush with handle wheel and nut flanged end with pilot threaded bore on both flange for pressure gauge attachment etc all complete as per the direction of Engineer-in-charge. |
| 20 | 100mm dia Valve |
| 21 | 150mm dia Valve |
| 22 | Laying 100mm dia |
| 23 | Laying 150mm dia |
| 24 | 100mm dia.Swing check type Reflux Valves (Non-return valves) with double flanged ends RATING - 1.6 MPa IS : 5312 (Part-I) - 2004 |
| 25 | Supplying all materials, labour and T & P etc. and construction of valve chamber of following sizes with 100mm thick sand filling in foundation, lean cement concrete (1:3:6) of 100mm thick, well burnt Clamp Burnt brick masonry in cement mortar (1:3) of 100mm thick wall in foundation and plinth, 12mm thick cement plaster (1:3) inside and outside, 100mm thick cover slab in M-20 R.C.C. (1:1½:3) using minimum reinforcement of HYSD bar in cover slab at 100kg. per each Cum. of RCC, 50mm thick cement concrete (1:2:4) in bed and wall top including centring and shuttering, earthwork in all kinds of soil and refilling etc. as per specification and direction of the Engineer-in-charge, including transportation of all materials to site, all complete. Sluice valve Chamber (1.05 mx1.05 mx0.9 m) |
| 26 | Supplying all materials, labour and T & P etc. and including spirally welded M.S pipes and offsets of specified diameter M.S. blank flange, painting the inside and outside surface of pipe with two coats of food grade black anti-corrosive paint of approved make as per I.S. specification with all lead and other taxes etc. including conveying of pipes and the specials and lowering at the trenches on proper bedding and jointing / welding with 3 runs of arc welding including supply of all jointing materials, welding rod, oxyacetylene gas, power supply for fabrication of specials at site with standby arrangement of diesel generator set and dewatering the pipe line etc. shoring and shuttering, barricading and inter-connection of M.S pipe with C.I pipe as per site condition and as per P.H. specification and direction of Engineer-In-Charge, including transportation of all materials to site, all complete. |
| 27 | 100mm dia. (Proportionate to Cost of 150 mm MS pipe ) (outer dia. 114.3 mm) |
| 28 | 150mm dia. (4.5mm thick) |
| 29 | MS pipe cutting |
| 30 | MS pipe welding at site |
| 31 | Providing Flanged joints conforming to IS:3114-1994 to Flanged Cast Iron pipes and fittings of following nominal diameter including testing of joints, Cost of Bolts & Nuts and rubber insertions as per specification and direction of the Engineer-in-charge, all complete. |
| 32 | 100mm dia. |
| 33 | 150mm dia. |
| 34 | Fixing Temper Proof Air Valve Confirming to (IS-14845/2000) for water works purposes for the following diameters including drilling the water main (Cast Iron Pipi with Metal Straps) as per specification complete. |
| 35 | 100mm dia. MS Flange |
| 36 | 150mm dia. MS Flange |
| 37 | Supply of consumer water meter of size 15mm dia as per ISO-4064 including transportation etc. all complete with 5(five)years replacment gurantee from the date of receipt of the materials by the nosignee as per direction of the Engineer. The water meter shall be inferential type, multi jet, magnetically coupled having dry dial, brass/bronze/engineering plastic body,Anti corrosive register with 5mm thick glass dualer Class-B confirming to ISO-4064 standard with MID certfication mark, shall be with protection class of IP-46 complete with conencting pieces end all test certificates. Water meter shuold have certificate for the model approval as per the Indian Legal Metrology ACT-2009 conforming to the technical specification for consumer water meters.etc. all complete. |
| 38 | Supplying all materials, labour and T & P for Fixing Ferrule conforming to IS:2692-1978 of the 15mm dia.bore including drilling the water main (Cast Iron/DI pipes or pipes with the metal straps) including all cost of Labour and materials as per specification and direction of the Engineer-in- Charge etc all complete. |
| 39 | Providing and fixing pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) for repair of damaged House Connection pipeline inclduing fitting , fixing etc. as per the direction of the Engineer-in-charge, all complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender