Tender For Provision For Repair Of Ge Building And Setting Up New Central Antiquity Section Phase 1 At Red Fort, Delhi
Tender Value
1.82 Crore
Estimated cost
Bid Submission
10 Oct 2026
10 days left
EMD
5.47 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision For Repair Of Ge Building And Setting Up New Central Antiquity Section Phase 1 At Red Fort, Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar.. |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal Concrete 1:3:6 or richer mix (i/c equivalent design mix). |
| 3 | \\"Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 11.26.1 25 mm thick\\" |
| 4 | 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 5 | Dismantling roofing including ridtes hops, valleys and gutters etc stacking tyhe material withtin 50 meters lead of Aasbestos cemen sheet |
| 6 | Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 7 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 12.4.1 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 8 | \\"Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead15.14.1 Of sectional area 40 square centimetres andabove\\" |
| 9 | Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : 9.54.1 Sal wood |
| 10 | \\"Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) Sal wood\\" |
| 11 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutter |
| 12 | \\"Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick second class teak wood\\" |
| 13 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 12.21.1 In 75x75 mm deep chase |
| 14 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 15 | CEMENT PLASTER (IN COARSE SAND) 12 mmcement plaster of mix : 13.4.1 1:4 (1 cement: 4 coarse sand) |
| 16 | 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface event and smooth complete. |
| 17 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 18 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 19 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm). |
| 20 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer's specification, with all 4 side tapered and backed acoustical tissue with NRC value not less than 0.6012.45.4 |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture of required colourto give an even shade:13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint ofapprovedbrand and manufacture |
| 22 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 23 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm |
| 24 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 25 | Providing and laying damp proof course 40mm thick with cement concrete 1:2:4 ( 1 cement: 2 coarse sand ( zone III) derived from natural sources: 4 graded stone aggregate 12.5 mm nominal size derived from natural sources. |
| 26 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. 7.2.1 Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 27 | Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) :13.33.2 Raised and cut pointing |
| 28 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:4.2.3 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 29 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 30 | \\"Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.1 M.S. Tube \\" |
| 31 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. reference fo the execution from DSR 2023 code 11.28.1 |
| 32 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately):8.14.1.2 60 mm thick |
| 33 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 34 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 35 | Float glass panes 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm). |
| 36 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm |
| 37 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 38 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge15.43.2 bituminous road |
| 39 | Provision for procurment of essential electrical items to be used and fixed inside the building.Two sided pole light 3 mt hight from ground made up of cast iron designed base 6inch dia, and G.I top 4 inch dia fixed on concrete block with nu and bolt over 6mm base plate [EACH] |
| 40 | Street LED 45 watt warm white light phillips/siska/hevells or equivalan [EACH] |
| 41 | Thimble [EACH] |
| 42 | 4 core 25 sqmm Armond aluminium wire [RMT] |
| 43 | 6 sqmm copper wire (90mt) [EACH] |
| 44 | 4 sqmm copper wire (90mt) [EACH] |
| 45 | 2.5 sqmm copper wire (90mt) [EACH] |
| 46 | 1.5 sqmm copper wire (90mt) [EACH] |
| 47 | 1 sqmm copper wire (90mt) [EACH] |
| 48 | MCCB 63Amp 4 pole [EACH] |
| 49 | connector 4 pole three phase [EACH] |
| 50 | 16 Amp mcb [EACH] |
| 51 | G.I Wire 8No size for erthing [RMT] |
| 52 | pvc pipe 2 inch (6 ft length) [EACH] |
| 53 | 12 modular plate [EACH] |
| 54 | 6 modular plate [EACH] |
| 55 | 3 modular plate [EACH] |
| 56 | PVC BOX 12 M [EACH] |
| 57 | PVC box 6 modular plate [EACH] |
| 58 | PVC Box 3 modular plate [EACH] |
| 59 | 16 Amp swich [EACH] |
| 60 | 16 amp socket [EACH] |
| 61 | 6 amp switch [EACH] |
| 62 | 6 Amp socket [EACH] |
| 63 | Regulator [EACH] |
| 64 | Falceling light 2x2 ft 36 wt [EACH] |
| 65 | led tubelight with fitting 20wt [EACH] |
| 66 | 1.15 inch batten (6 ft length ) [EACH] |
| 67 | 1 inch batton ( 6 ft length ) [EACH] |
| 68 | Sqare boad 2 inch [EACH] |
| 69 | Celing rose [EACH] |
| 70 | batton Holder [bundle] |
| 71 | flaxible pipe 1 inch (30 mtr) [bundle] |
| 72 | celing fan 48 inch ( compton or equ. ) [EACH] |
| 73 | Wall mounted fan 16 inch [EACH] |
| 74 | Exaust fan PVC 12 Inch [EACH] |
| 75 | MCB BOX G.I casting 12 x 12 inch [EACH] |
| 76 | MCB 32 to 16 amp [EACH] |
| 77 | DP 63 amp [EACH] |
| 78 | Tap [EACH] |
| 79 | Labour charges [Job] |
| 80 | Provision for procurement of required sanitary articles and items to be fixed in the toilets of buildings.uPVC waste pipe 90MM heavy gaige [RMT] |
| 81 | uPVC Waste Pipe 110 MM heavy [RMT] |
| 82 | uPVC Waste Pipe 150 MM heavy gauge [RMT] |
| 83 | Washbasin Tap (Jaquar or eq) (FUS29173D, FUS-29005NB) [EACH] |
| 84 | Angle wall Tap (Jaquar or eq) (SOL6421) [EACH] |
| 85 | Toilet jet/Hand Shower(Jaquar or eq) [EACH] |
| 86 | Toilet roll holder(Jaquar or eq) [EACH] |
| 87 | Handdryer automatic machine wall mounted [EACH] |
| 88 | UPVC pipe 25mm (10ft) [EACH] |
| 89 | UPVC elbow 25mm [EACH] |
| 90 | UPVC Tee 25mm [EACH] |
| 91 | Tank nipple 25mm h [EACH] |
| 92 | M Tee 25x25 [EACH] |
| 93 | UPVC pipe 20mm (10ft) [EACH] |
| 94 | UPVC elbow 20mm [EACH] |
| 95 | UPVC Tee 20mm [EACH] |
| 96 | B. Elbow 20X15mm [EACH] |
| 97 | M Tee 20x15mm [EACH] |
| 98 | PVC pipe 110mm dia [EACH] |
| 99 | PVC Y Tee 110mm [EACH] |
| 100 | 45 degree angle elbow [EACH] |
| 101 | Ball valve 25mm [EACH] |
| 102 | PVC pipe 50mm dia [RMT] |
| 103 | PVC Elbow 50mm dia [RMT] |
| 104 | 1.5 hp booster pump ( crompton or equ.) [EACH] |
| 105 | \\"Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge\\" |
| 106 | \\"Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources).\\" |
| 107 | \\"Centering and shuttering including strutting, propping etc. and removal of from for Suspended floors, roofs, landings, balconies and access platform |
| 108 | \\"Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).\\" |
| 109 | \\"Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars\\" |
| 110 | \\"Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brickhoney comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5\\"\\"\\" |
| 111 | Supplying and fixing C.I. cover without frame for manholes :500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg |
| 112 | \\"Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. completeat all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm\\" |
| 113 | \\"Modular Design Toilet Block cabins:- Materials - Compact grade Laminate Board, Accessories - made of corrosion and scratch resistance high quality brushed finish stainless steel. Accessories Will be hygienic and antistatic having high resistance to weathering.Accessories will be resistant to corrosion and pollution, domestic clearners, disinfectans and diluted acids. Head Rail- Made of corrosion resisance Aluminium oxide extruded profile. Other Accessories:- (i) spring loaded door hings( self closing) (ii) Privacy lock with indicator.(iii) Coat hanger (iv) Adjustable legs (v) Door knobs. Dimensions Total cubide height from ground-1970 MM, Cubicle depth- 1500 MM, Pilaster Height-1860 MM, Door Height-1800 MM, Partition Width-1000 MM, Door Width-600 MM (including all fittings)\\"\\"\\"(Remark-Actual Detailmay be provided at the time of execution) |
| 114 | \\"a17.3Provision of providing and fixing of European (W.C) with cistern rest on floor area including all fitting i.e connection pipes. sockets & other fittings to connect the tap and drain out pipe & holes including all type of washer, nut bolts etc complete. (Jaquar, Hindware, Parryware or eq) Jaquar CNS-WST-751P180SPPZ, CNSWST- 363SPPZ, CNS-WST855P180SPPSM)(Anyof the mentioned code of related article will be consider for execution after the approval from the competant authority and the same will be executed acoording to the finalized code & rate of the article. As the rates are taken according to the mentioned codes)\\"(Remark-ActualDetail may be provided at the time of execution) |
| 115 | \\"Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.\\" |
| 116 | \\"Provision of providing and fixing of urinal including all fitting i.e connection pipes. sockets & other fittings to connect the tap and drain out pipe & holes including all type of washer, nut bolts etc complete. (Jaquar, Hindware, Parryware or eq) Jaquar URS white-13255, URS-WHT13263, URS-GRM -13253N, URSWHT-13253N) (Any of the mentioned code of related article will be consider for execution after the approval from the competant authority and the same will be executed acoording to the finalized code & rate of the article. As the rates are taken according to the mentioned codes\\"\\"\\"(Remark-Actual Detail may be provided at thetime of execution) |
| 117 | \\"Provision of providing and fixing of washbasin including all fitting i.e connection pipes. sockets & other fittings to connect the tap and drain out pipe & holes including all type of washer, nut bolts etc complete. (Jaquar, Hindware, Parryware or eq) Jaquar FUS-2931, CNSWHT-705, OPS-WHT-15801 PM, OPS-WHT15601PM, GDS-WHT-25901)(Any of the mentioned code of related article will be consider for execution after the approval from the competant authority and the same will be executed acoording to the finalized code & rate of the article. As the rates are taken according to the mentioned codes) \\"\\"\\"(Remark-Actual Detail may be provided at thetime of execution) |
| 118 | \\"Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick\\"(Remark-Actual Detail may be provided at the time of execution) |
| 119 | \\"Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5\\" |
| 120 | \\"Providing and placing on terrace (at all floor levels Tripple layer) polyethylene water storage 1000lt capacity tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank\\"(Remark-Actual Detail may be provided at the time of execution) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender