Tender For Providing Of 01 X Shed For Storage Of Ecc & E At Namkum Pocket Of Ranchi Mil Stn
Tender Value
30.54 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
13 days left
EMD
61080
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of 01 X Shed For Storage Of Ecc & E At Namkum Pocket Of Ranchi Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out Soft/loose soil ,complete all as specifed and directed. |
| 2 | Excavation in trenches n.exc. 1.50 Mtr in depth and n.exc. 1.50 Mtr in width getting out in Soft/Loose soil ,complete all as specifed and directed. |
| 3 | M&L for Returning filling in incl spreading levelling watering and well ramming in layers not exceeding 25 cm ,complete all as specifed and directed. |
| 4 | Removing Excavated materials (soil) to a distance exceeding 250 M and n. exc 500 mtr depositing where directed at a level not exceeding 1.5 M above the starting point,complete all as specifed and directed. |
| 5 | M&L Cement concrete in foundation filling and mass concarete (1:4:8) type D-2( 40 mm graded aggregate) ,complete all as specifed and directed. |
| 6 | M&L Reinforced cement concrete (design mix)in M-25 (20mm graded aggregates) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete,complete all as specifed and directed. |
| 7 | M&L Reinforced cement concrete (design mix)in M-25 (20mm graded aggregates) Beams, cantilevers, bressummers, lintels over 1.5m span,complete all as specifed and directed. |
| 8 | M&L Reinforced cement concrete (design mix)in M-25 (20mm graded aggregates) Columns, pillars, piers,posts and struts,complete all as specifed and directed. |
| 9 | M&L Formwork in Flat Rough finished surfaces of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter ,complete all as specifed and directed. |
| 10 | M&L Formwork in Flat Rough finished surfaces of concretete sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc ,complete all as specifed and directed. |
| 11 | M&L Formwork in Flat Rough finished surfaces of concretete Formwork to sides of pillars, posts, struts, piers, columns and stanchions, etc ,complete all as specifed and directed. |
| 12 | M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specifed and directed. |
| 13 | Description all as per Ser item No 12 above but 8mm dia as in stirrups and binders ,complete all as specifed and directed. |
| 14 | M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 |
| 15 | M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement, complete all specified and directed. |
| 16 | M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement, complete all specified and directed. |
| 17 | M&L for three coats of White Wash incl preparation newly plastered surfaces , complete all specified and directed. |
| 18 | S&F Fe 410-W (Gde E- 250) quality A Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all specified and directed. |
| 19 | S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets,conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') |
| 20 | S&F SS screw bolts 11 to 15 Diameter of neck in mm(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long |
| 21 | S&F Pre-painted pre-engineered / profiled steel sheet with crimp-curving by roll-forming of any color as approved by Engr-in-Charge having min base metal thickness 0.4735 mm, total coated thickness 0.530 mm with min field strength of base metal 550 MPA, confirming to AS 1397 with Zincolume-Alloy coating (55% AI,43.4% ZN, 1.6 % Si) coating AZ 150 grade (150 gm per sqm) & paint coating conforming to AS 1397-AS/NZS 2728 type 4.00 & profile sheet conforming to IS 513, 14246 & 15965. Pre painted zincalume sheet shall have Super Durable Polymer paint C3 type with BMT 0.475 mm, alunimum zinc coating thickness 0.04mm, Super Durable Polymer 0.32mm & passivation 0.008mm suitable for fixing in roof cover/ cladding to wall and structure base incl pre-engineered frame work complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for two coats of New steel Surfaces of red oxide Primer over Two coat Synthetic enamel paint(ordinary tint)any description, not otherwise descri-bed, over 10cm width or girth , complete all specified and directed. |
| 23 | M&L 75mm thick PCC 1:3:6 type C-2 as in plinth protection, path etc finished the surface even & fair , complete all specified and directed. |
| 24 | M&L broken stone or boulder hardcore of gauge n exc. 63mm, deposited, spread and leveled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all specified and directed. |
| 25 | M&L Cement concrete in foundation filling and mass concarete 1:3:6 type C-2 ( 40 mm graded aggregate) ,complete all as specifed and directed. |
| 26 | M&L Machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all specified and directed. |
| 27 | S&F Steel rolling shutters, with out ball bearing, as specified including topcover,anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete but gear operated type with bevel gear box and crank handle , complete all specified and directed. |
| 28 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded |
| 29 | S&F 4mm thick plain sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete. |
| 30 | M&L Providing and laying 80mm thick factory made chamfered edge cement concrete pave block of M-35 grade with approved colour design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand All as specified and directed |
| 31 | M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 32 | (a) One light point controlled by one, one way switch 5 Amps |
| 33 | (b) One fan point controlled by one, one way switch 5 Amps and regulator |
| 34 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 35 | Description all as per item No 31 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 36 | S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site. |
| 37 | S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site. |
| 38 | S & F for switch socket combination 2 in 1 , 3 pin 5 and 15 Amp 230 Volts complete all as specified and directed at site. |
| 39 | Supply and fixing ceiling rose surface bakelite 3 terminals 65 x 50mm complete all as specified. |
| 40 | S & F for stepped type electronic fan regulator flushType complete all as specified and directed at site. |
| 41 | M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- two runs of 6 sqmm cable, one runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 42 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 43 | S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 44 | S & F for MCB Single pole rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 45 | S & F ceiling fans complete with blades, down rods, electronic regulator accessories, 230 v , 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushleess direct current motor (BLDC). Please Enable Macros to View BoQ information |
| 46 | S & F ceiling fans complete with blades, down rods, electronic regulator accessories, 230 v , 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushleess direct current motor (BLDC). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender